Generación del modo HE11 a partir de una guía circular lisa monomodo
Ver/
Fecha
1996Versión
Acceso abierto / Sarbide irekia
Tipo
Contribución a congreso / Biltzarrerako ekarpena
Impacto
|
nodoi-noplumx
|
Resumen
In this paper, we present an original taper design to obtain the HE11 corrugated circular waveguide
mode exciting with a pure TE11 monomode smooth circular waveguide mode.
The proposed corrugated taper has a longitudinal section composed of two hyperbolic profiles in
series, one concave and the other convex united at a point, such that the derivative is continuous.
Superimposed there is an ad ...
[++]
In this paper, we present an original taper design to obtain the HE11 corrugated circular waveguide
mode exciting with a pure TE11 monomode smooth circular waveguide mode.
The proposed corrugated taper has a longitudinal section composed of two hyperbolic profiles in
series, one concave and the other convex united at a point, such that the derivative is continuous.
Superimposed there is an additional tapering of the corrugation depth that goes from l/2 at taper input to l/4
within the first hyperbola.
This original synthesis procedure has been successfully tested by computational simulation. The
calculation method has been validated by experimental results of other authors. [--]
Materias
Modo HE11,
Guía circular lisa monomodo
Notas
Trabajo presentado al XI Simposium de la Unión Científica Internacional de Radio (URSI'96). Madrid, septiembre de 1997.
Departamento
Universidad Pública de Navarra. Departamento de Ingeniería Eléctrica y Electrónica /
Nafarroako Unibertsitate Publikoa. Ingeniaritza Elektrikoa eta Elektronikoa Saila