Mostrar el registro sencillo del ítem
Design and optimization of the dies for the isothermal forging of a cam
dc.creator | Salcedo Pérez, Daniel | es_ES |
dc.creator | Luis Pérez, Carmelo | es_ES |
dc.creator | Luri Irigoyen, Rodrigo | es_ES |
dc.creator | León Iriarte, Javier | es_ES |
dc.creator | Puertas Arbizu, Ignacio | es_ES |
dc.creator | Fuertes Bonel, Juan Pablo | es_ES |
dc.date.accessioned | 2017-10-30T11:14:39Z | |
dc.date.available | 2017-10-30T11:14:39Z | |
dc.date.issued | 2015 | |
dc.identifier.issn | 1877-7058 (Print) | |
dc.identifier.issn | 1877-7058 (Electronic) | |
dc.identifier.uri | https://hdl.handle.net/2454/26074 | |
dc.description | Trabajo presentado a The Manufacturing Engineering Society International Conference, MESIC 2015 (Barcelona) | es_ES |
dc.description.abstract | In the present study, the design of the dies required for the isothermal forging of a cam is analysed by finite volume method. Specifically, cams are of great importance in automotive industry, where a lower weight and an improvement in the lubrication or in the materials to be in contact lead to a significant reduction in the fuel cost. The flow stress curves of one Al-Mg alloy were firstly determined by using compression tests. Once these flow stress curves were obtained, FV simulation was employed. In the forging process, the optimum die configuration has been selected. To this end, several aspects have been taken into account such as the force required for the forging, the correct die filling, the introduced plastic strain and the damage imparted to the billet. | en |
dc.description.sponsorship | The authors acknowledge the support given by the Spanish former Ministry of Economy and Competitiveness under the research project DPI2013-41954-P. | en |
dc.format.extent | 8 p. | |
dc.format.mimetype | application/pdf | en |
dc.language.iso | eng | en |
dc.publisher | Elsevier | en |
dc.relation.ispartof | Procedia Engineering 132 (2015) 1069 – 1076 | en |
dc.rights | © 2015 Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license. | en |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/4.0/ | |
dc.subject | Isothermal forging | en |
dc.subject | Design | en |
dc.subject | Cam | en |
dc.title | Design and optimization of the dies for the isothermal forging of a cam | en |
dc.type | Contribución a congreso / Biltzarrerako ekarpena | es |
dc.type | info:eu-repo/semantics/conferenceObject | en |
dc.contributor.department | Ingeniería Mecánica, Energética y de Materiales | es_ES |
dc.contributor.department | Mekanika, Energetika eta Materialen Ingeniaritza | eu |
dc.rights.accessRights | Acceso abierto / Sarbide irekia | es |
dc.rights.accessRights | info:eu-repo/semantics/openAccess | en |
dc.identifier.doi | 10.1016/j.proeng.2015.12.597 | |
dc.relation.projectID | info:eu-repo/grantAgreement/MINECO//DPI2013-41954-P/ES/ | en |
dc.relation.publisherversion | https://doi.org/10.1016/j.proeng.2015.12.597 | |
dc.type.version | Versión publicada / Argitaratu den bertsioa | es |
dc.type.version | info:eu-repo/semantics/publishedVersion | en |