Mostrar el registro sencillo del ítem
Influence of metallic die temperature in the solidification of Cu-10%Al-2%Fe alloy
dc.creator | Cenoz Echeverría, Isaac | es_ES |
dc.date.accessioned | 2019-01-22T13:34:44Z | |
dc.date.available | 2019-01-22T13:34:44Z | |
dc.date.issued | 2010 | |
dc.identifier.issn | 2300-1909 (Electronic) | |
dc.identifier.uri | https://hdl.handle.net/2454/32050 | |
dc.description.abstract | The phases obtained in copper aluminium bronze alloy (Cu-Al10-Fe2) cast into a permanent die were investigated. The parameters examined were the pre-heating temperatures of the die and the graphite coating thickness. The phases α and γ2 were detected as well as the metastable phases β’ and γ’. The intermetallics of the system Fe-Al were obtained in various stoichiometric compositions. The different cooling rates of the casting resulted in two mechanisms of transformation to α grains out of the unstable β phase, one being nucleation and growth producing needle shaped α grains, the other exhibiting a massive transformation to spherical α grains. These two mechanisms determine the changes in the size of the α grains as a result of changes in the cooling rate in its various ranges. | en |
dc.format.extent | 5 p. | |
dc.format.mimetype | application/pdf | en |
dc.language.iso | eng | en |
dc.publisher | Walter de Gruyter | en |
dc.relation.ispartof | Archives of Metallurgy and Materials, vol. 55, 2010, issue 4 | en |
dc.rights | Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International | en |
dc.rights.uri | https://creativecommons.org/licenses/by-nc-nd/4.0/ | |
dc.subject | Aluminium bronze | en |
dc.subject | Metallography | en |
dc.subject | Cooper | en |
dc.subject | Iron die | en |
dc.title | Influence of metallic die temperature in the solidification of Cu-10%Al-2%Fe alloy | en |
dc.type | info:eu-repo/semantics/article | en |
dc.type | Artículo / Artikulua | es |
dc.contributor.department | Ingeniería Mecánica, Energética y de Materiales | es_ES |
dc.contributor.department | Mekanika, Energetika eta Materialen Ingeniaritza | eu |
dc.rights.accessRights | info:eu-repo/semantics/openAccess | en |
dc.rights.accessRights | Acceso abierto / Sarbide irekia | es |
dc.identifier.doi | 10.2478/v10172-010-0005-5 | |
dc.relation.publisherversion | https://doi.org/10.2478/v10172-010-0005-5 | |
dc.type.version | info:eu-repo/semantics/publishedVersion | en |
dc.type.version | Versión publicada / Argitaratu den bertsioa | es |