Phenyl siloxane hybrid xerogels: structure and porous texture
Fecha
2019Versión
Acceso abierto / Sarbide irekia
Tipo
Artículo / Artikulua
Versión
Versión aceptada / Onetsi den bertsioa
Identificador del proyecto
ES/1PE/MAT2016-78155
Impacto
|
10.1007/s10450-019-00075-9
Resumen
The aim of this research is to investigate the effect of phenyltriethoxysilane (PhTEOS) and
tetraethoxysilane (TEOS) molar ratios as silicon precursors on the structure and porous texture of xerogels.
We have prepared phenyl-silane hybrid xerogels from mixtures of PhTEOS and TEOS at pH 10 and
333 K, using ethanol as a solvent. Characterization techniques include 29Si NMR, FTIR, XRD, FE-SEM,
H ...
[++]
The aim of this research is to investigate the effect of phenyltriethoxysilane (PhTEOS) and
tetraethoxysilane (TEOS) molar ratios as silicon precursors on the structure and porous texture of xerogels.
We have prepared phenyl-silane hybrid xerogels from mixtures of PhTEOS and TEOS at pH 10 and
333 K, using ethanol as a solvent. Characterization techniques include 29Si NMR, FTIR, XRD, FE-SEM,
HRTEM, TGA-DSC, helium density, and gas adsorption (N2 at 77 K and CO2 at 273 K). In order to assess
the contribution of the quadrupolar moment of N2 and CO2 in the adsorption we obtained the adsorption–
desorption isotherm of Ar at 87.3 K for the xerogel synthesized from 50% PhTEOS. The morphology of
xerogels changed from aggregates of spherical particles for 20% PhTEOS to lamellae for samples obtained
with PhTEOS percentages equal or larger that 60%. The incorporation of phenyl groups into the xerogel
matrix caused an increase in the spacing bond between silicon atoms and led to an intramolecular reaction
and the formation of lamellar domains. Increasing the PhTEOS molar ratio in the mixture of silicon
precursors produced hybrid xerogels with lower specific surface area, pore volume and characteristic
energy. The similarity between the isotherms of N2 at 77 K and Ar at 87.3 K indicates that the main
retention mechanism is physisorption and that the variation in the surface chemistry with the incorporation of phenyl groups doesn’t inhibit the retention of N2. [--]
Materias
Sol–gel,
Phenyltriethoxysilane,
Hybrid xerogels,
Porous texture
Editor
Springer US
Publicado en
Adsorption (2019)
Notas
This is a post-peer-review, pre-copyedit version of an article published in Adsorption. The final authenticated version is available online at:
https://doi.org/10.1007/s10450-019-00075-9
Departamento
Universidad Pública de Navarra. Departamento de Ciencias /
Nafarroako Unibertsitate Publikoa. Zientziak Saila /
Universidad Pública de Navarra/Nafarroako Unibertsitate Publikoa. Institute for Advanced Materials and Mathematics - INAMAT2
Versión del editor
Entidades Financiadoras
This work was backed by the Ministerio de
Ciencia y Tecnología (Grant No. CTQ2009-07993) and by the Ministerio de Economía, Industria y Competitividad (Grant No. MAT2016-78155-C2-2-R). Paula Moriones is grateful to the Departamento de Industria y Tecnología, Comercio y Trabajo of the Navarre
Government for the fellowships granted (Ref. Number 175/01/08 and 269/01/08, respectively).