Mostrando ítems 1-4 de 4
Wavelength and phase detection based SMS fiber sensors optimized with etching and nanodeposition
(IEEE, 2016) Artículo / Artikulua,
The development of an optical fiber refractometer by hydrogen fluoride etching and sputtering deposition of a thin-film of indium tin oxide on a single-mode-multimode-single-mode fiber structure has been analyzed with ...
Nanofabrication of phase-shifted Bragg gratings on the end facet of multimode fiber towards development of optical filters and sensors
(Elsevier, 2018) Artículo / Artikulua,
This work describes the process of nanofabrication of phase-shifted Bragg gratings on the end facet of a multimode optical fiber with a pulsed DC sputtering system based on a single target. Several structures have been ...
Influence in cladding mode distribution of overlay deposition on long-period fiber gratings
(Optical Society of America, 2006) Artículo / Artikulua,
A thin overlay of higher refractive index than that of the cladding of a long-period fiber grating induces in cladding modes strong variations in effective index, mode profile, cross-coupling coefficient with the core ...
Enhancement of sensitivity in long period fiber gratings with deposition of low refractive index materials
(Optical Society of America, 2005) Artículo / Artikulua,
It was proved [Opt. Lett. 30, 720 (2005)] that the deposition of an overlay of higher refractive index than that of the cladding on a long-period fiber grating (LPFG) causes large shifts in the attenuation bands induced by ...