Now showing items 1-6 of 6
Micro and nanostructured materials for the development of optical fibre sensors
(MDPI, 2017) info:eu-repo/semantics/article,
The measurement of chemical and biomedical parameters can take advantage of the features exclusively offered by optical fibre: passive nature, electromagnetic immunity and chemical stability are some of the most relevant ...
Fiber-optic lossy mode resonance sensors
(Elsevier, 2014) Contribución a Congreso / Biltzarrerako ekarpena,
In the last 4 years, experimental evidences about the potential use of optical sensors based on Lossy Mode Resonances (LMR) have been presented in the literature. These LMR sensors have some similarities with Surface ...
Generation of lossy mode resonances by deposition of high-refractive-index coatings on uncladded multimode optical fibers
(IOP Publishing Ltd, 2010) Artículo / Artikulua,
A comparative study of lossy mode resonances generated by depositing two different materials is presented. The two materials selected are indium tin oxide (ITO) and indium oxide. The two materials present different ...
Sensors based on thin-film coated cladding removed multimode optical fiber and single-mode multimode single-mode fiber: a comparative study
(Hindawi Publishing Corporation, 2015) Artículo / Artikulua,
Two simple optical fibre structures that do not require the inscription of a grating, a cladding removed multimode optical fibre (CRMOF) and a single-mode multimode single-mode structure (SMS), are compared in terms of ...
Design rules for lossy mode resonance based sensors
(Optical Society of America, 2012) Artículo / Artikulua,
Lossy mode resonances can be obtained in the transmission spectrum of cladding removed multimode optical fiber coated with a thin-film. The sensitivity of these devices to changes in the properties of the coating or the ...
Generation of surface plasmon resonance and lossy mode resonance by thermal treatment of ITO thin-films
(Elsevier, 2014) Artículo / Artikulua,
Silicon wafers coated with IndiumTinOxide (ITO) by application of sputtering technique have been characterized after different post-annealing techniques, showing that this last factor is critical for the quality of the ...