Buscar
Mostrando ítems 1-10 de 14
Análisis de la influencia del tratamiento térmico de envejecimiento en la modificación de las propiedades mecánicas de la aleación AA6060 procesada por ECAE
(CENIM, 2011)
Artículo / Artikulua,
En el presente trabajo se ha realizado un estudio de la modificación de las propiedades mecánicas de la aleación de aluminio AA6060 F, al ser deformada mediante deformación plástica severa empleando el proceso de extrusión ...
Surface roughness analysis on the dry turning of an Al-Cu alloy
(Elsevier, 2015)
Artículo / Artikulua,
Nowadays, surface finish has become an important indicator of quality and precision in manufacturing processes and it is
considered one of the most important parameter in Industry. In this present study, the influence of ...
Manufacturing of nanostructured rings from previously ECAE-processed AA5083 alloy by isothermal forging
(Hindawi, 2013)
info:eu-repo/semantics/article,
The manufacturing of a functional hollow mechanical element or ring of the AA5083 alloy previously equal channel angular
extrusion (ECAE) processed, which presents a submicrometric microstructure, is dealt with. For this ...
Development of nanostructured AA3103 by equal channel angular pressing and thermal treatments
(Hindawi, 2014)
info:eu-repo/semantics/article,
This work presents a study related to the achievement of a nanometric structure in AA3103, employing severe plastic deformation
processes (SPD), in this case equal channel angular pressing (ECAP). The changes in the ...
Strain mapping and nanocrystallite size determination by neutron diffraction in an aluminum alloy (AA5083) severely plastically deformed through equal channel angular pressing
(Hindawi, 2013)
info:eu-repo/semantics/article,
Six specimens of an aluminum alloy (AA-5083) extruded by Equal Channel Angular Pressing following two different routes plus
a blank sample were examined with a neutron radiation of 1.5448 ˚ A. Macrostrain maps from the ...
Design, simulation and manufacturing of a connecting rod from ultra-fine grained material and isothermal forging
(Elsevier, 2016)
Artículo / Artikulua,
In this research work, a study on the mechanical properties of isothermal forging for connecting rods is
made from previously ECAP (Equal Channel Angular Pressing)-processed AA1050 and AA5083 aluminium
alloys. This severe ...
Design, optimization, and mechanical property analysis of a submicrometric aluminium alloy connecting rod
(Hindawi, 2015)
Artículo / Artikulua,
Ultrafine grained materials have a great deal of both scientific and technological interest because they allow outstanding properties
to be obtained. An improvement in the mechanical strength and in the ductility and a ...
Experimental modelling of critical damage obtained in Al-Mg and Al-Mn alloys for both annealed state and previously deformed by ECAP
(Elsevier, 2016)
Artículo / Artikulua,
Assessing the damage produced in plastic deformation processes permits the optimum manner to shape a material
that could avoid any cracks from appearing. In this present research work, the absolute critical damage in ...
Mechanical properties analysis of an Al-Mg alloy connecting rod with submicrometric structure
(MDPI, 2015)
Artículo / Artikulua,
Over these last few years, there has been a growing interest in developing mechanical components from submicrometric materials due to the significant improvement that these materials present compared to their original ...
Analytical modelling of energy density and optimization of the EDM machining parameters of Inconel 600
(MDPI, 2017)
Artículo / Artikulua,
In this present research work, a new modelling of energy density in EDM (Electrical Discharge Machining) is proposed. Energy density can be defined as the amount of energy needed to get a unit volume of material removed, ...