Buscar
Mostrando ítems 1-10 de 28
Volatile organic compound optical fiber sensors: a review
(MDPI, 2006)
Artículo / Artikulua,
Volatile organic compound (VOC) detection is a topic of growing interest with applications in diverse fields, ranging from environmental uses to the food or chemical industries. Optical fiber VOC sensors offering new and ...
Magnetic anisotropy in isotropic and nanopatterned strongly exchange-coupled nanolayers
(Springer, 2012)
Artículo / Artikulua,
In this study, the fabrication of magnetic multilayers with a controlled value of the in-plane uniaxial magnetic anisotropy field in the range of 12 to 72 kA/m was achieved. This fabrication was accomplished by the ...
An antibacterial coating based on a polymer/sol-gel hybrid matrix loaded with silver nanoparticles
(Springer, 2011)
Artículo / Artikulua,
In this work a novel antibacterial surface composed of an organic-inorganic hybrid matrix of tetraorthosilicate and a polyelectrolyte is presented. A precursor solution of tetraethoxysilane (TEOS) and poly(acrylic acid ...
Mode transitions and thickness measurements during deposition of nanoscale TiO2 coatings on tilted fiber Bragg gratings
(IEEE, 2022)
Artículo / Artikulua,
The mode transition is a phenomenon observed in
thin film coated long period fiber gratings (LPGs) and singlemode multimode single-mode (SMS) fibers for certain values of
the coating thickness and refractive index, ...
Generation of lossy mode resonances by deposition of high-refractive-index coatings on uncladded multimode optical fibers
(IOP Publishing Ltd, 2010)
Artículo / Artikulua,
A comparative study of lossy mode resonances generated by depositing two different materials
is presented. The two materials selected are indium tin oxide (ITO) and indium oxide. The two
materials present different ...
High sensitivity humidity sensor based on cladding-etched optical fiber and lossy mode resonances
(Elsevier, 2016)
Artículo / Artikulua,
In this work a high sensitivity optical fiber humidity sensor (OFHS) is presented. The configuration chosen for this purpose is a cladding-etched single mode optical fiber (CE-SMF) coated with a thin film of tin oxide ...
Etched and nanocoated single-mode multimode single-mode (SMS) fibers for detection of wind turbine gearbox oil degradation
(IEEE, 2019)
info:eu-repo/semantics/article,
The application of an etching process in a single-mode multimode single-mode (SMS) fiber allows monitoring the change of refractive index of wind turbine gearbox oil due to temperature and degradation with a limitation at ...
Improving the width of lossy mode resonances in a reflection configuration D-shaped fiber by nanocoating laser ablation
(Optical Society of America, 2020)
info:eu-repo/semantics/article,
The full width at half maximum (FWHM) of lossy mode resonances (LMRs) in the optical spectrum depends on the homogeneity of the thin film deposited. In this Letter, a method for improving the FWHM is applied for an LMR ...
High magnetic, transport, and optical uniaxial anisotropis generated by controlled directionally grown nano-sheets in Fe thin films
(American Institute of Physics, 2023)
Artículo / Artikulua,
Fe films with thicknesses between 17 and 95 nm were grown with a nano-sheet morphology, which enabled their high uniaxial magnetic,
transport, and optical in-plane anisotropies. The top edge of the nano-sheets was directly ...
A comparative study of two different approaches for the incorporation of silver nanoparticles into layer-by-layer films
(Springer, 2014)
info:eu-repo/semantics/article,
In this work, a comparative study about the incorporation of silver nanoparticles (AgNPs) into thin films is presented
using two alternative methods, the in situ synthesis process and the layer-by-layer embedding deposition ...