Buscar
Mostrando ítems 1-10 de 38
Resonances in coated long period fiber gratings and cladding removed multimode optical fibers: a comparative study
(Optical Society of America, 2010)
info:eu-repo/semantics/article,
Two optical fiber devices have been coated in parallel: a long
period fiber grating (LPFG) and a cladding-removed multimode optical
fiber (CRMOF). The progressive coating of the LPFG by means of the
layer-by-layer ...
Fabrication of Bragg gratings on the end facet of standard optical fibers by sputtering the same material
(IEEE, 2016)
Artículo / Artikulua,
A sputtering process has been applied to deposit quarter-wavelength stacks on the end facet of cleaved optical fibers by using only one sputtering target. Standard multimode optical fibers were used as substrates to fabricate ...
Tapered single-mode optical fiber pH sensor based on lossy mode resonances generated by a polymeric thin-film
(IEEE, 2012)
Artículo / Artikulua,
Lossy mode resonances can be generated with certain polymeric nanostructures, such as those obtained with a multilayered assembly of poly(allylamine hydrochloride) and poly (acrylic acid). This coating is adsorbed by the ...
Influence of waist length in lossy mode resonances generated with coated tapered single mode optical fibers
(IEEE, 2011)
Artículo / Artikulua,
In this work, the generation of electromagnetic resonances due to the deposition of a nanocoating on a tapered single-mode optical fiber is analyzed. The layer-by-layer technique is used to control the thickness of the ...
High sensitive refractometers based on lossy mode resonances (LMRs) supported by ITO coated D-shaped optical fibers
(Optical Society of America, 2015)
info:eu-repo/semantics/article,
Tin doped indium oxide (ITO) coatings fabricated onto D-shaped
optical fibers are presented as the supporting medium for Lossy Mode
Resonances (LMRs) generation. The characteristic geometry of ITO-coated
D-shaped optical ...
Generation of lossy mode resonances by deposition of high-refractive-index coatings on uncladded multimode optical fibers
(IOP Publishing Ltd, 2010)
Artículo / Artikulua,
A comparative study of lossy mode resonances generated by depositing two different materials
is presented. The two materials selected are indium tin oxide (ITO) and indium oxide. The two
materials present different ...
Optimization of sensors based on multimode interference in single-mode–multimode– single-mode structure
(IEEE, 2013)
Artículo / Artikulua,
By coating a single-mode–multimode–single-mode
(SMS) structure with a complex refractive index thin-film the central
wavelength of the transmission and attenuation bands of the
optical spectrum can be shifted. By adequate ...
Lossy mode resonance generation with indium tin oxide coated optical fibers for sensing applications
(IEEE, 2010)
Artículo / Artikulua,
Surface plasmon resonances and lossy mode
resonances can be generated with Indium Tin Oxide (ITO)
coated optical fibers. Both phenomena are analyzed and
compared. Lossy mode resonances present important
advantages: ...
Sensitivity enhancement in a multimode interference-based SMS fibre structure coated with a thin-film: theoretical and experimental study
(Elsevier, 2014)
info:eu-repo/semantics/article,
Spectral width reduction in lossy mode resonance-based sensors by means of tapered optical fibre structures
(Elsevier, 2014)
Artículo / Artikulua,