Mostrar el registro sencillo del ítem

dc.creatorBeaskoetxea Gartzia, Unaies_ES
dc.creatorMaci, Stefanoes_ES
dc.creatorNavarro Cía, Migueles_ES
dc.creatorBeruete Díaz, Migueles_ES
dc.date.accessioned2017-01-10T23:04:30Z
dc.date.available2017-01-10T23:04:30Z
dc.date.issued2017
dc.identifier.citationU. Beaskoetxea, S. Maci, M. Navarro-Cía and M. Beruete, "3-D-Printed 96 GHz Bull’s-Eye Antenna With Off-Axis Beaming," in IEEE Transactions on Antennas and Propagation, vol. 65, no. 1, pp. 17-25, Jan. 2017. doi: 10.1109/TAP.2016.2628322en
dc.identifier.issn0018-926X
dc.identifier.urihttps://hdl.handle.net/2454/23230
dc.description.abstractReducing the profile, footprint and weight of antennas embarked on aircrafts, drones or satellites has been a long pursued objective. Here we tackle this issue by developing a millimeter-wave 96 GHz elliptical Bull’s-Eye antenna with off-axis radiation at 16.5° that has been fabricated by low cost 3-D printing stereolithography, followed by metal coating. The theoretical basis for optimum off-axis operations is explained. Measurement results show an overall good agreement with simulations, displaying a gain of 17 dB and a 3.5° beamwidth (E-plane) at the operational frequency. The off-axis beaming enlarges the potential applicability of this technology with respect to the broadside beam solution.en
dc.description.sponsorshipThis work was supported by the Spanish Government under contract TEC2014-51902-C2-2-R. M. N.-C. is supported by University of Birmingham [Birmingham Fellowship]. M.B. acknowledges support by the Spanish Government under contract RYC-2011-08221en
dc.format.mimetypeapplication/pdfen
dc.language.isoengen
dc.publisherIEEEen
dc.relation.ispartofIEEE Transactions on Antennas and Propagation, vol. 65, no. 1, January 2017en
dc.rights© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.en
dc.subjectLeaky wave horn antennaen
dc.subjectOff-axis beamingen
dc.subjectStereolitographyen
dc.subjectBull’s-eye antennaen
dc.subjectCorrugated surfaceen
dc.subjectMillimeter-wavesen
dc.title3D-printed 96 GHz bull’s-eye antenna with off-axis beamingen
dc.typeArtículo / Artikuluaes
dc.typeinfo:eu-repo/semantics/articleen
dc.contributor.departmentIngeniería Eléctrica y Electrónicaes_ES
dc.contributor.departmentIngeniaritza Elektrikoa eta Elektronikoaeu
dc.rights.accessRightsAcceso abierto / Sarbide irekiaes
dc.rights.accessRightsinfo:eu-repo/semantics/openAccessen
dc.identifier.doi10.1109/TAP.2016.2628322
dc.relation.projectIDinfo:eu-repo/grantAgreement/MINECO//TEC2014-51902-C2-2-R/ES/en
dc.relation.publisherversionhttps://doi.org/10.1109/TAP.2016.2628322
dc.type.versionVersión aceptada / Onetsi den bertsioaes
dc.type.versioninfo:eu-repo/semantics/acceptedVersionen


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem


El Repositorio ha recibido la ayuda de la Fundación Española para la Ciencia y la Tecnología para la realización de actividades en el ámbito del fomento de la investigación científica de excelencia, en la Línea 2. Repositorios institucionales (convocatoria 2020-2021).
Logo MinisterioLogo Fecyt