Listar Comunicaciones y ponencias de congresos ISC - ISC biltzarretako komunikazioak eta txostenak por autor UPNA "Del Villar, Ignacio"
Mostrando ítems 1-10 de 10
-
AC/DC millivoltage sensor by means of ITO-coated optical fibers: towards monitoring of biosignals
This contribution shows the monitoring of AC and DC millivoltage signals by means of lossy mode resonances generated by Indium Tin Oxide (ITO) on optical fibers. Sensors were obtained by sputtering ITO thin-films onto 25 ... -
All fiber interferometer for ice detection
This work presents an etched single-mode - multimode - single-mode structure that detects the solid-to-liquid change of state of the water due to an increased refractive index sensitivity within the 1.308 - 1.321 RIU range -
Fiber-based label-free D-dimer detection for early diagnosis of venous thromboembolism
D-dimer is a useful diagnostic biomarker for deep vein thrombosis or pulmonary embolism, collectively referred to as venous thromboembolism (VTE). The ability to detect in real-time the amount of D-dimer with a fast and ... -
Fiber-optic immunosensor based on lossy mode resonances induced by indium tin oxide thin-films
A novel immunosensor based on lossy mode resonances (LMRs) induced in optical fibers is developed in this contribution. Indium tin oxide (ITO) is sputtered on the optical substrate to generate an LMR in the transmission ... -
Lossy mode resonance enabling ultra-low detection limit for fibre-optic biosensors (INVITED)
The combination of optical fibre-based biosensors with nanotechnologies is providing the opportunity for the development of in situ, portable, lightweight, versatile and high-sensitivity optical sensing platforms. We report ... -
Lossy mode resonance sensors based on tungsten oxide thin films
Tungsten oxide (WO3) thin-films fabricated on glass slides have been proven to generate lossy mode resonances (LMRs) in the visible region. Obtained devices were characterized in transmission by lateral incidence of light ... -
Mode transition during deposition of nanoscale ITO coatings on tilted fiber Bragg gratings
The mode transition phenomenon is experimentally demonstrated in tilted fiber Bragg gratings (TFBG) through the deposition of an indium tin oxide (ITO) thin film employing a DC sputtering machine. -
Monitoring the etching process in LPFGs towards development of highly sensitive sensors
In this work, the monitoring of the etching process up to a diameter of 30 µm of two LPFG structures has been compared, one of them had initially 125 µm, whereas the second one had 80 µm. By tracking the wavelength shift ... -
Multi-sensing platform design with a grating-based nanostructure on a coverslip substrate
Two different thin film designs with a grating pattern are simulated on a soda lime coverslip, which acts as optical waveguide, with the purpose of generating both a lossy mode resonance (LMR) in transmission and reflection ... -
Optical fiber immunosensors optimized with cladding etching and ITO nanodeposition
Etched optical fiber immunosensors, with and without ITO nanodeposition, have been developed. The performance of these immunosensors has been assessed implementing an immunoassay. The sensitivity of the mmnunosensor increased ...