Design rules for lossy mode resonance based sensors
Fecha
2012Autor
Versión
Acceso abierto / Sarbide irekia
Tipo
Artículo / Artikulua
Versión
Versión aceptada / Onetsi den bertsioa
Impacto
|
10.1364/AO.51.004298
Resumen
Lossy mode resonances can be obtained in the transmission spectrum of cladding removed
multimode optical fiber coated with a thin-film. The sensitivity of these devices to changes
in the properties of the coating or the surrounding medium can be optimized by means of
the adequate parameterization of the coating refractive index, the coating thickness and the
surrounding medium refractive inde ...
[++]
Lossy mode resonances can be obtained in the transmission spectrum of cladding removed
multimode optical fiber coated with a thin-film. The sensitivity of these devices to changes
in the properties of the coating or the surrounding medium can be optimized by means of
the adequate parameterization of the coating refractive index, the coating thickness and the
surrounding medium refractive index (SMRI). Some basic rules of design, which enable
the selection of the best parameters for each specific sensing application, are indicated in
this work. [--]
Materias
Thin films,
Optical resonance,
Fiber optic Sensors
Editor
Optical Society of America
Publicado en
Applied Optics Vol. 51, Issue 19, pp. 4298-4307 (2012)
Departamento
Universidad Pública de Navarra. Departamento de Ingeniería Eléctrica y Electrónica /
Nafarroako Unibertsitate Publikoa. Ingeniaritza Elektrikoa eta Elektronikoa Saila
Versión del editor
Entidades Financiadoras
This work was supported by the Spanish Ministry
of Education and Science-FEDER TEC2010-17805 and Government of Navarra research grants.
Special thanks to FIDENA for the utilization of
the SEM.