Modelling and operation of 6-pulse thyristor rectifiers for supplying high power electrolyzers
Fecha
2022Autor
Versión
Acceso abierto / Sarbide irekia
Tipo
Contribución a congreso / Biltzarrerako ekarpena
Versión
Versión aceptada / Onetsi den bertsioa
Impacto
|
10.1109/COMPEL53829.2022.9829992
Resumen
This paper presents a detailed analysis of a
6-pulse thyristor rectifier aimed at supplying high
power electrolyzers. For this purpose, an analytical model of
the three-phase controlled rectifier with AC-side
inductance and constant-voltage load has been
developed. The different operating modes are identified and
characterized. The derived equations are then combined with
the electrical mo ...
[++]
This paper presents a detailed analysis of a
6-pulse thyristor rectifier aimed at supplying high
power electrolyzers. For this purpose, an analytical model of
the three-phase controlled rectifier with AC-side
inductance and constant-voltage load has been
developed. The different operating modes are identified and
characterized. The derived equations are then combined with
the electrical model of the electrolyzer, which allows to
predict the operating point of the system. This model may
serve as a useful tool for dimensioning thyristor rectifiers
when operating with high power electrolyzers. [--]
Materias
Analytical Model,
High power electrolyzer,
Three-phase controlled rectifier,
Thyristor rectifiers,
Water electrolysis
Editor
IEEE
Publicado en
2022 IEEE 23rd Workshop on Control and Modeling for Power Electronics (COMPEL) p.1-8 978-1-6654-1081-6
Departamento
Universidad Pública de Navarra. Departamento de Ingeniería Eléctrica, Electrónica y de Comunicación /
Nafarroako Unibertsitate Publikoa. Ingeniaritza Elektrikoa, Elektronikoa eta Telekomunikazio Ingeniaritza Saila /
Universidad Pública de Navarra/Nafarroako Unibertsitate Publikoa. Institute of Smart Cities - ISC