Open Access
Spatial MIMO channel characterization under different vehicular distributions
(IEEE, 2024) Rodríguez Corbo, Fidel Alejandro; Celaya Echarri, Mikel; Shubair, Raed M.; Falcone Lanas, Francisco; Azpilicueta Fernández de las Heras, Leyre; Estadística, Informática y Matemáticas; Estatistika, Informatika eta Matematika; Ingeniería Eléctrica, Electrónica y de Comunicación; Ingeniaritza Elektrikoa, Elektronikoa eta Telekomunikazio Ingeniaritza; Institute of Smart Cities - ISC
Considering the large benefits brought by multipleinput- multiple-output (MIMO) technologies in vehicular communications, the analysis of MIMO channel characteristics using accurate and efficient channel models for these scenarios has become crucial. In this work, an intensive analysis of the MIMO channel characteristics in a mmWave vehicle-to-infrastructure (V2I) communication link with different vehicular distributions is performed. For that purpose, an in-house deterministic simulation channel model with an embedded MIMO channel approach has been developed. Experimental measurements in the same vehicular scenario have been performed to validate the proposed channel simulation technique. Variations in the capacity of the MIMO system have been analyzed in relation to different channel metrics, obtaining that the main contributors are the Signal-to- Noise Ratio (SNR) and the Angular Spread (AS).
Open Access
MmWave channel stationarity analysis of V2X communications in an urban environment
(IEEE, 2023) Rodríguez Corbo, Fidel Alejandro; Azpilicueta Fernández de las Heras, Leyre; Celaya Echarri, Mikel; Shubair, Raed M.; Falcone Lanas, Francisco; Estadística, Informática y Matemáticas; Ingeniería Eléctrica, Electrónica y de Comunicación; Institute of Smart Cities - ISC; Estatistika, Informatika eta Matematika; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren
Vehicular communication channels are subject to high nonstationarity mainly characterized by the scatterers’ and/or transceivers’ high mobility. In this sense, this letter presents a characterization of the channel quasi-stationarity regions (QSR) in a V2X generic high-dense urban environment at millimeter wave frequencies (28 GHz). Results are extracted from multiple snapshot simulations by means of a three-dimensional ray-launching algorithm inducing the continuous mobility of the vehicles on the scene and validated with an experimental campaign of measurements in the real scenario. The average power delay profile correlation matrix is used as a descriptor of the channel nonstationarity and the mean correlation is outlined for several thresholds. The obtained QSR results are consistent with the related works reported in the literature. Finally, the effects of these QSR in small- and large-scale parameters are assessed as per threshold considerations.
Open Access
3D-RL MIMO capacity estimations under vegetation blockage
(IEEE, 2023-09-07) Rodríguez Corbo, Fidel Alejandro; Celaya Echarri, Mikel; Shubair, Raed M.; Falcone Lanas, Francisco; Azpilicueta Fernández de las Heras, Leyre; Institute of Smart Cities - ISC
Multiplexing gains are one of the many promises for increasing throughput in multiple-input-multiple-output (MIMO) systems. In this sense, a rich scattered environment may be beneficial for the multiplexing capabilities of the MIMO channel. However, mm Wave frequency bands tend to have less effective multipath contributions than sub-6 GHz bands. In this work, an in-deep analysis of the multiplexing capabilities in a mm Wave vehicular-to-infrastructure (V2I) channel is performed. Metrics that may impact the channel capacity like received power and angle-of-arrival (AoA) Spread are fully analyzed as well.
Open Access
Wireless information power transfer assessment by deterministic radio propagation estimations in smart city contexts
(IEEE, 2025-03-12) Picallo Guembe, Imanol; López Iturri, Peio; Klaina, Hicham; Celaya Echarri, Mikel; Rodríguez Corbo, Fidel Alejandro; Azpilicueta Fernández de las Heras, Leyre; Falcone Lanas, Francisco; Ingeniería Eléctrica, Electrónica y de Comunicación; Ingeniaritza Elektrikoa, Elektronikoa eta Telekomunikazio Ingeniaritza; Estadística, Informática y Matemáticas; Estatistika, Informatika eta Matematika; Institute of Smart Cities - ISC
The development of context aware environments, such as those given in the framework of Smart Cities and Smart Regions require the use of ubiquitous connectivity and more recently, energy availability for a wide variety of Internet of Things based applications. In this work, estimations of wireless channel distributions for coverage/capacity as well as for energy availability will be presented, for outdoor as well as indoor scenarios with the aid of deterministic inhouse developed simulation tool. Volumetric assessment can be obtained, aiding in the radio network planning process, as well as in the feasibility of electromagnetic based energy harvesting solutions for Internet of Things based applications.
Open Access
An enhanced approach to virtually increase quasi-stationarity regions within geometric channel models for vehicular communications
(IEEE, 2023) Rodríguez Corbo, Fidel Alejandro; Celaya Echarri, Mikel; Shubair, Raed M.; Falcone Lanas, Francisco; Azpilicueta Fernández de las Heras, Leyre; Estadística, Informática y Matemáticas; Estatistika, Informatika eta Matematika; Institute of Smart Cities - ISC; Ingeniería Eléctrica, Electrónica y de Comunicación; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren
Vehicular communication channels are intrinsically non-stationary, as they present high mobility and abundant dynamic scatterers. Quasi-stationary regions can assess the degree of non-stationarity within a determined scenario and time variant observation of the channel can be extracted. These regions can aid geometrical models as to increase channel sampling intervals or to develop hybrid stochastic-geometric channel models. In this work, a new methodology for the use of virtual quasi-stationary regions within geometric channel models is proposed, in order to leverage the inherent location information to virtually increase their size. Overall, the use of delay-shifted channel responses improves the mean correlation coefficient between consecutive locations, ultimately reducing computation time for time-variant geometric channel models.
Open Access
An acceleration approach for channel deterministic approaches based on quasi-stationary regions in V2X communications
(IEEE, 2024) Rodríguez Corbo, Fidel Alejandro; Celaya Echarri, Mikel; Shubair, Raed M.; Falcone Lanas, Francisco; Azpilicueta Fernández de las Heras, Leyre; Ingeniería Eléctrica, Electrónica y de Comunicación; Ingeniaritza Elektrikoa, Elektronikoa eta Telekomunikazio Ingeniaritza; Estadística, Informática y Matemáticas; Estatistika, Informatika eta Matematika; Institute of Smart Cities - ISC
Vehicular environments are characterized by a high mobility, which alongside with the presence of abundant dynamic scatterers, lead to vehicular communication channels to be intrinsically non-stationary. In this sense, the quasi-stationary regions (QSRs) can assess the degree of non-stationarity within a determined scenario, and ultimately assist geometrical models to increase channel sampling intervals or to develop more efficient hybrid stochastic-geometric channel models. In this work, the channel QSRs in a vehicular communication (V2X) generic highdense urban environment at millimeter wave (mmWave) frequencies (28 GHz) have been analyzed using different approaches, such as the extended channel response into a Doppler-delay domain or the shadow fading spatial auto-correlation function (SF ACF) methodology. Then, the QSRs have been used as sampling distance in an in-house developed three-dimensional ray-launching (3D-RL) algorithm as an acceleration approach. The time variant channel features have been extracted and compared with the full resolution approach, obtaining consistent results when considering the QSR sampling distances, while decreasing by 83.30% the simulation computational time for the Doppler-delay approach, and 92.86% for the SF ACF method.
Open Access
Diffuse-scattering-informed geometric channel modeling for THz wireless communications systems
(IEEE, 2023) Azpilicueta Fernández de las Heras, Leyre; Schultze, Alper; Celaya Echarri, Mikel; Rodríguez Corbo, Fidel Alejandro; Constantinou, Costas; Shubair, Raed M.; Falcone Lanas, Francisco; Navarro Cía, Miguel; Estadística, Informática y Matemáticas; Ingeniería Eléctrica, Electrónica y de Comunicación; Institute of Smart Cities - ISC; Estatistika, Informatika eta Matematika; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren
Surpassing 100 Gbps data throughput is a key objective and an active area of research for sixth-generation (6G) wireless networks that can only be met by exploiting the TeraHertz (THz) frequency band (0.3 - 10 THz). THz channel modeling faces new challenges given the emerging relevance of scattering and molecular absorption in this frequency range as well as the lack of a reliable library of material properties. In this work, we address these challenges by measuring systematically the dielectric properties of 27 common building and office materials and reporting an in-house three-dimensional ray-launching (3D-RL) algorithm that uses the created material library and accounts for rough surface scattering and atmospheric attenuation. In order to validate the proposed algorithm, a channel sounder measurement campaign has been performed in a typical indoor environment at 300 GHz. Simulations and measurements show good agreement, demonstrating the need for modelling scattering and atmospheric absorption in the THz band. The proposed channel model approach enables scenarios at THz frequencies to be investigated by simulation, providing a relevant knowledge for the development of ultra-high-speed wireless communication systems.