Azpilicueta Fernández de las Heras, Leyre
Loading...
Email Address
person.page.identifierURI
Birth Date
Job Title
Last Name
Azpilicueta Fernández de las Heras
First Name
Leyre
person.page.departamento
Ingeniería Eléctrica, Electrónica y de Comunicación
person.page.instituteName
ISC. Institute of Smart Cities
ORCID
person.page.observainves
person.page.upna
Name
- Publications
- item.page.relationships.isAdvisorOfPublication
- item.page.relationships.isAdvisorTFEOfPublication
- item.page.relationships.isAuthorMDOfPublication
10 results
Search Results
Now showing 1 - 10 of 10
Publication Open Access Performance analysis of IEEE 802.15.4 compliant wireless devices for heterogeneous indoor home automation environments(Hindawi, 2012) Nazábal Urriza, Juan Antonio; López Iturri, Peio; Azpilicueta Fernández de las Heras, Leyre; Falcone Lanas, Francisco; Fernández Valdivielso, Carlos; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa; Gobierno de Navarra / Nafarroako GobernuaThe influence of topology as well as morphology of complex indoor scenarios in the deployment of wireless sensor networks and wireless systems applied to home and building automation systems is analyzed. The existence of loss mechanisms such as material absorption (walls, furniture, etc.) and strong multipath components as well as the increase in the number of wireless sensors within indoor scenarios increases the relevance in the configuration of the heterogeneous wireless systems. Simulation results by means of empirical-based models are compared with an in-house 3D ray launching code as well as measurement results from wireless sensor networks illustrate the strong influence of the indoor scenario in the overall performance. The use of adequate radioplanning strategies lead to optimal wireless network deployments in terms of capacity, quality of service, and reduced power consumption.Publication Open Access An easy to deploy street light control system based on wireless communication and LED technology(MDPI, 2013) Elejoste Larrucea, Pilar; Angulo Martínez, Ignacio; Perallos Ruiz, Asier; Chertudi Ozamiz, Aitor; García Zuazola, Ignacio Julio; Moreno, Asier; Azpilicueta Fernández de las Heras, Leyre; Astrain Escola, José Javier; Falcone Lanas, Francisco; Villadangos Alonso, Jesús; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa; Ingeniería Matemática e Informática; Matematika eta Informatika IngeniaritzaThis paper presents an intelligent streetlight management system based on LED lamps, designed to facilitate its deployment in existing facilities. The proposed approach, which is based on wireless communication technologies, will minimize the cost of investment of traditional wired systems, which always need civil engineering for burying of cable underground and consequently are more expensive than if the connection of the different nodes is made over the air. The deployed solution will be aware of their surrounding’s environmental conditions, a fact that will be approached for the system intelligence in order to learn, and later, apply dynamic rules. The knowledge of real time illumination needs, in terms of instant use of the street in which it is installed, will also feed our system, with the objective of providing tangible solutions to reduce energy consumption according to the contextual needs, an exact calculation of energy consumption and reliable mechanisms for preventive maintenance of facilities.Publication Open Access Analysis and description of HOLTIN service provision for AECG monitoring in complex indoor environments(MDPI, 2013) Led Ramos, Santiago; Azpilicueta Fernández de las Heras, Leyre; Aguirre Gallego, Erik; Martínez de Espronceda Cámara, Miguel; Serrano Arriezu, Luis Javier; Falcone Lanas, Francisco; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaIn this work, a novel ambulatory ECG monitoring device developed in-house called HOLTIN is analyzed when operating in complex indoor scenarios. The HOLTIN system is described, from the technological platform level to its functional model. In addition, by using in-house 3D ray launching simulation code, the wireless channel behavior, which enables ubiquitous operation, is performed. The effect of human body presence is taken into account by a novel simplified model embedded within the 3D Ray Launching code. Simulation as well as measurement results are presented, showing good agreement. These results may aid in the adequate deployment of this novel device to automate conventional medical processes, increasing the coverage radius and optimizing energy consumption.Publication Open Access IVAN: Intelligent van for the distribution of pharmaceutical drugs(MDPI, 2012) Moreno, Asier; Angulo Martínez, Ignacio; Perallos Ruiz, Asier; Landaluce, Hugo; García Zuazola, Ignacio Julio; Azpilicueta Fernández de las Heras, Leyre; Astrain Escola, José Javier; Falcone Lanas, Francisco; Villadangos Alonso, Jesús; Ingeniería Eléctrica y Electrónica; Ingeniería Matemática e Informática; Ingeniaritza Elektrikoa eta Elektronikoa; Matematika eta Informatika IngeniaritzaThis paper describes a telematic system based on an intelligent van which is capable of tracing pharmaceutical drugs over delivery routes from a warehouse to pharmacies, without altering carriers' daily conventional tasks. The intelligent van understands its environment, taking into account its location, the assets and the predefined delivery route; with the capability of reporting incidences to carriers in case of failure according to the established distribution plan. It is a non-intrusive solution which represents a successful experience of using smart environments and an optimized Radio Frequency Identification (RFID) embedded system in a viable way to resolve a real industrial need in the pharmaceutical industry. The combination of deterministic modeling of the indoor vehicle, the implementation of an ad-hoc radiating element and an agile software platform within an overall system architecture leads to a competitive, flexible and scalable solution.Publication Open Access Towards a traceability system based on RFID technology to check the content of pallets within electronic devices supply chain(Hindawi, 2013) Angulo Martínez, Ignacio; Perallos Ruiz, Asier; Azpilicueta Fernández de las Heras, Leyre; Falcone Lanas, Francisco; Hernández Jayo, Unai; Moreno, Asier; García Zuazola, Ignacio Julio; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaIn the last few years there has been a growing interest in smart solutions capable of dealing with the traceability of products and materials to improve logistical processes. Most of the existing solutions have been designed without considering the difficulties of deploying traceability systems in the storehouses currently working, not dealing with specific needs, such as environment characteristics or time required to be handled by workers. In this paper, in order to test the viability of its application, a first prototype of a traceability system capable of checking the content of pallets loaded with electronic devices is presented. It is based on ultra-high frequency (UHF) radio frequency identification (RFID) technology using passive tags. A holistic approach has been adopted to design the system: it begins with a radioelectrical characterization of the environment where the check points will be implemented, continues with the integration of a set of data acquisition and wireless communication devices, and ends with a logistics information system able to provide final user services.The combination of physical layer analysis with a top layer system view can aid the planning as well as operational phase of this type of RFID system within a logistic chain.Publication Open Access Characterization and consideration of topological impact of wireless propagation in a commercial aircraft environment [wireless corner](IEEE, 2013) Rajo-Iglesias, Eva; Aguirre Gallego, Erik; López Iturri, Peio; Azpilicueta Fernández de las Heras, Leyre; Arpón Díaz-Aldagalán, Javier; Falcone Lanas, Francisco; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaWireless systems are gaining a relevant role for multiple communication tasks within commercial aircrafts. In this work, wireless propagation in an indoor commercial airplane cabin will be analyzed. The impact of indoor elements, such as passenger seats, luggage compartments and a dual deck structure will be considered, with the aid of in-house implemented 3D ray launching code. Multipath propagation plays a relevant role, given by the time domain characteristics obtained by spatially dependent power delay profiles and delay spread. The use of deterministic techniques in order to consider the inherent complexity of the airplane cabin can aid in wireless system planning in order to increase overall system capacity whilst reducing power consumption.Publication Open Access Evaluation of electromagnetic dosimetry of wireless systems in complex indoor scenarios with human body interaction(EMW Publishing, 2012) Aguirre Gallego, Erik; Arpón Díaz-Aldagalán, Javier; Azpilicueta Fernández de las Heras, Leyre; Ramos González, Victoria; Falcone Lanas, Francisco; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa; Gobierno de Navarra / Nafarroako GobernuaIn this work, the influence of human body within the estimation of dosimetric values is analyzed. A simplified human body model, including the dispersive nature of material parameters of internal organs, skin, muscle, bones and other elements has been implemented. Such a model has been included within an indoor scenario in which an in-house 3D ray launching code has been applied to estimate received power levels within the complete scenario. The results enhance previous dosimetric estimations, while giving insight on influence of human body model in power level distribution and enabling to analyze the impact in the complete volume of the scenario.Publication Open Access Evaluation of the Brillouin precursor performance for ultra wide band intra-body technologies(Taylor&Francis, 2013) Falcone Lanas, Francisco; Dawood, Muhammad; Aguirre Gallego, Erik; Azpilicueta Fernández de las Heras, Leyre; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaIn this letter, we describe the formation and the evolution of Brillouin precursorfields through human tissues by using a frequency-domain analysis technique and amulti-pole Cole–Cole model to characterize the dielectric properties of the humanbody tissues, in a frequency band designated by the FCC for ultra wide bandmedical applications, which extends from 0.5 to 20 GHz. A 3D representation of thehuman body model has been implemented by employing a discretized mesh ofcuboids with a resolution of 8 mm3in which the frequency dispersive materialparameters for different tissues have been considered. The dispersive propagation isanalyzed for the purposes of radar imaging and intra-body communications. The per-formance of a classical rectangular pulse, a Brillouin pulse and a medium-matchedwaveform is described. The results show the potential application of this type ofcommunication scheme in order to improve the achievable measurement range andprovide better signal to noise ratios.Publication Restricted Estudio sobre la codificación conjunta canal-fuente en sistema UHF RFID(2009) Azpilicueta Fernández de las Heras, Leyre; Porta Cuéllar, Sonia; Escuela Técnica Superior de Ingenieros Industriales y de Telecomunicación; Telekomunikazio eta Industria Ingeniarien Goi Mailako Eskola Teknikoa; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaPublication Open Access Impact of high power interference sources in planning and deployment of wireless sensor networks and devices in the 2.4 GHz frequency band in heterogeneous environments(MDPI, 2012) López Iturri, Peio; Nazábal Urriza, Juan Antonio; Azpilicueta Fernández de las Heras, Leyre; Rodríguez Ulibarri, Pablo; Beruete Díaz, Miguel; Fernández Valdivielso, Carlos; Falcone Lanas, Francisco; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa; Gobierno de Navarra / Nafarroako GobernuaIn this work, the impact of radiofrequency radiation leakage from microwave ovens and its effect on 802.15.4 ZigBee-compliant wireless sensor networks operating in the 2.4 GHz Industrial Scientific Medical (ISM) band is analyzed. By means of a novel radioplanning approach, based on electromagnetic field simulation of a microwave oven and determination of equivalent radiation sources applied to an in-house developed 3D ray launching algorithm, estimation of the microwave oven's power leakage is obtained for the complete volume of an indoor scenario. The magnitude and the variable nature of the interference is analyzed and the impact in the radio link quality in operating wireless sensors is estimated and compared with radio channel measurements as well as packet measurements. The measurement results reveal the importance of selecting an adequate 802.15.4 channel, as well as the Wireless Sensor Network deployment strategy within this type of environment, in order to optimize energy consumption and increase the overall network performance. The proposed method enables one to estimate potential interference effects in devices operating within the 2.4 GHz band in the complete scenario, prior to wireless sensor network deployment, which can aid in achieving the most optimal network topology.