Person:
Torres Escribano, José Luis

Loading...
Profile Picture

Email Address

Birth Date

Research Projects

Organizational Units

Job Title

Last Name

Torres Escribano

First Name

José Luis

person.page.departamento

Ingeniería

person.page.instituteName

ISC. Institute of Smart Cities

ORCID

0000-0001-9275-8158

person.page.upna

241

Name

Search Results

Now showing 1 - 10 of 18
  • PublicationOpen Access
    The sky characterization according to the CIE Standard General Sky: comparative analysis of three classification methods
    (Elsevier, 2020) García Ruiz, Ignacio; Blas Corral, María Ángeles de; Torres Escribano, José Luis; Ingeniaritza; Institute of Smart Cities - ISC; Ingeniería
    Since the publication of the standard sky luminance distributions (SSLD) that was consolidated in the ISO 15469:2004(E)/CIE S 011/E:2003, numerous procedures have emerged for the characterization of the sky condition according to that standard. Precisely, the use of different procedures for the classification of the skies of a certain place according to the ISO/CIE standard can lead to obtain different frequencies of sky types. The existing uncertainties in the characterization of the sky condition according to the CIE Standard General Sky as a consequence of the classification procedure used are analyzed in this study. For this, three different classification procedures are used to characterize the sky radiance and luminance distribution measurements made by means of a sky-scanner in Pamplona (Spain) from 2007 to 2013. That is, (1) a method focused on determining the relative gradation and indicatrix functions, (2) a method based on the comparison of measured and standard luminances normalized against the horizontal diffuse illuminance, and (3) a new high-spatial-resolution approach that compares measured and standard luminances relative to zenith. In general terms, it is concluded that there is some uncertainty in the classification depending on the procedure used to characterize the sky.
  • PublicationOpen Access
    Evaluación comparativa de 19 modelos de estimación de irradiancia difusa sobre planos inclinados dependiendo del tipo de cielo estándar ISO/CIE
    (LNEG, 2020) García Ruiz, Ignacio; Torres Escribano, José Luis; Blas Corral, María Ángeles de; Sáenz Gamasa, Carlos; Hernández Salueña, Begoña; Illanes, R.; Ingeniería; Ingeniaritza; Ciencias; Zientziak
    En este trabajo se han evaluado 19 modelos de estimación de irradiancia difusa sobre el plano inclinado, que incluyen tanto modelos isotrópicos o pseudoisotrópicos como modelos anisotrópicos. Dicha evaluación se ha llevado a cabo a partir una serie de 5396 observaciones de irradiancia global, difusa y directa realizadas entre julio y diciembre de 2018 en la estación radiométrica de la Universidad Pública de Navarra (UPNA). El estado del cielo correspondiente a cada observación se ha caracterizado de acuerdo con el CIE Standard General Sky propuesto en la norma ISO 15469:2004(E)/CIE S 011/E:2003. Para esta clasificación se han utilizado las medidas de distribución angular de luminancia y radiancia proporcionadas por un escáner de cielo ubicado en la propia estación de la UPNA. De tal manera que, para cada combinación de orientación e inclinación del plano, se ha evaluado la bondad de los distintos modelos de acuerdo con los 15 tipos de cielo estándar propuestos por la norma ISO/CIE. Los resultados revelan que el modelo de Perez et al. 2 presenta los mejores resultados globales, así como en 5 de los 15 tipos de cielo ISO/CIE.
  • PublicationOpen Access
    Estimation of the solar thermal power generation potential in Pamplona (northern Spain)
    (Universidad Carlos III, 2022) García Ruiz, Ignacio; Prieto Cobo, Eduardo; Torres Escribano, José Luis; Ingeniería; Ingeniaritza; Institute of Smart Cities - ISC
    In this work, an analysis of the potential of the city of Pamplona to produce solar thermal energy was carried out, according to the solar radiation received. As a result, for each residential, industrial, or service rooftop, information was provided on (1) the area available for thermal installation, (2) the solar thermal installation capacity and (3) the monthly and annual thermal energy generation potential. It was found that, if all suitable areas of the city are used, it would be possible to achieve an annual total solar thermal energy production of 1197.69 GWh. If solar energy supply and thermal demand were perfectly coupled over time, it would be possible to cover 99.1% of Pamplona's thermal energy demand.
  • PublicationOpen Access
    Analytical expressions for estimating sky diffuse irradiance and illuminance on tilted planes for the CIE standard general skies
    (Elsevier, 2021) Torres Escribano, José Luis; García Ruiz, Ignacio; Ingeniaritza; Institute of Smart Cities - ISC; Ingeniería
    This work proposes a set of analytical expressions for the calculation of the relationship between sky diffuse illuminance on a tilted plane and horizontal plane corresponding to the 15 ISO/CIE standard sky types. Given the parallelism in the angular distribution of sky diffuse radiance and luminance, these expressions can also be used to calculate the diffuse sky irradiance on an inclined plane. The proposed analytical expressions are obtained by adjusting the results of a numerical calculation whose methodology is described in detail in the paper. The use of these analytical expressions significantly reduces the calculation time. It is verified that the relative root-mean-square errors obtained with the analytical expressions are small compared with the use of numerical calculation, ranging from 0.03% to 4.09%, and with a tendency to increase with clear skies and high solar zenith angles.
  • PublicationOpen Access
    Multitemporal evaluation of topographic correction algorithms using synthetic images
    (SPIE, 2012) Sola Torralba, Ion; Álvarez Mozos, Jesús; González de Audícana Amenábar, María; Torres Escribano, José Luis; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak
    Land cover classification and quantitative analysis of multispectral data in mountainous regions is considerably hampered by the influence of topography on the spectral response pattern. In the last years, different topographic correction (TOC) algorithms have been proposed to correct illumination differences between sunny and shaded areas observed by optical remote sensors. Although the available number of TOC methods is high, the evaluation of their performance usually relies on the existence of precise land cover information, and a standardised and objective evaluation procedure has not been proposed yet. Besides, previous TOC assessment studies only considered a limited set of illumination conditions, normally assuming favourable illumination conditions. This paper presents a multitemporal evaluation of TOC methods based on synthetically generated images in order to evaluate the influence of solar angles on the performance of TOC methods. These synthetic images represent the radiance an optical sensor would receive under specific geometric and temporal acquisition conditions and assuming a certain land-cover type. A method for creating synthetic images using state-of-the-art irradiance models has been tested for different periods of the year, which entails a variety of solar angles. Considering the real topography of a specific area a Synthetic Real image (SR) is obtained, and considering the relief of this area as being completely flat a Synthetic Horizontal image (SH) is obtained. The comparison between corrected image obtained applying a TOC method to SR image and SH image of the same area, i.e. considered the ideal correction, allows assessing the performance of each TOC algorithm.
  • PublicationOpen Access
    Generation of the site-adapted clearest-sky year of direct normal irradiance for solar concentrating technologies
    (Elsevier, 2018) García Ruiz, Ignacio; Royo Romeo, Alberto; Torres Escribano, José Luis; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak; Gobierno de Navarra / Nafarroako Gobernua
    Concentrating photovoltaic and thermoelectric solar facilities base their operation on collecting the direct component of solar radiation. Given that the direct beam that reaches the Earth's surface varies greatly in time and space, it is common to assist the bankability of projects with a solar resource assessment. Sun-tracking collector plants are typically examined via a time series analysis of measured weather data and test reference years. Such analysis, which considers the eventual presence of clouds, may be complemented with the use of the synthetic clear-sky year assuring the maximum theoretical availability of direct normal irradiance at a site. This work introduces for the first time the concept of siteadapted clearest-sky year (CSY) and provides a methodology for its generation. Three methods to build the CSY and one algorithm to detect clear-sky moments are proposed.
  • PublicationOpen Access
    Luminance calibration of a full sky HDR imaging system using sky scanner measurements
    (Solar Energy Society, 2022) García Ruiz, Ignacio; Sáenz Gamasa, Carlos; Hernández Salueña, Begoña; García Santos, Rafael; Torres Escribano, José Luis; Zientziak; Ingeniaritza; Institute of Smart Cities - ISC; Institute for Advanced Materials and Mathematics - INAMAT2; Ciencias; Ingeniería
    A full sky High Dynamic Range imaging system, based on a Single-Lens Reflex camera with a fisheye lens, has been constructed and calibrated with a sky scanner luminance meter. The method considers the geometrical, spectral, timing and orientation issues between instruments. The calibration data sets, having nearly simultaneous measurements under stable sky conditions, were obtained from approximately one month of data using selection variables based in the experimental design. For luminance estimation we use the standard 𝐶𝐼𝐸𝑌 RGB combination and a Spectrally Matched Luminance (𝑆𝑀𝐿) predictor, matching the spectral response of the instruments. With 738 calibration points having luminances up to 23.6 kcd∕m2, covering 98.5% of the sky luminance range, 𝐶𝐼𝐸𝑌 is linearly correlated with sky scanner measurements with a coefficient of determination 𝑅2 = 0.9927 and a Root Mean Squared Error (𝑅𝑀𝑆𝐸) of 7.7%. 𝑆𝑀𝐿 gives better results, with 𝑅2 = 0.9973 and 𝑅𝑀𝑆𝐸 = 5.3%. With 253 calibration points with luminances up to 12.9 kcd∕m2, comprising 94.1% of the sky luminance range, both predictors clearly improve, with 𝑅2 = 0.9964 and 𝑅𝑀𝑆𝐸 = 4.1% in case of 𝐶𝐼𝐸𝑌 and 𝑅2 = 0.9982 and 𝑅𝑀𝑆𝐸 = 2.9% in case of 𝑆𝑀𝐿.
  • PublicationOpen Access
    Proposal and evaluation of typical illuminance year (TIY) generation procedures from illuminance or irradiance data for daylight assessment in the long term
    (Elsevier, 2020) García Ruiz, Ignacio; Blas Corral, María Ángeles de; Torres Escribano, José Luis; Ingeniaritza; Institute of Smart Cities - ISC; Ingeniería; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
    When assessing the long-term daylight availability or the performance of natural lighting systems in a given location, it is necessary to have representative data of local daylight conditions. The use of a daylight test reference year (TRY) becomes a good option in these cases. This paper proposes and evaluates a procedure for the generation of a typical illuminance year (TIY) considering illuminance as the only variable for selecting the typical periods that make up the reference year. Two versions of TIY are presented, one composed of 12 typical months selected from the series of observations and another composed of 365 typical days. Each of these versions is used to obtain a global illuminance TIY (TGIY) and a diffuse illuminance TIY (TDIY) from a 27-year dataset corresponding to the Vaulx-en-Velin station (France). Furthermore, 12 luminous efficacy models have been evaluated in order to obtain a TIY from a TRY generated from irradiance data when no illuminance data are available. Thus, a global luminous efficacy model and a diffuse model are selected after benchmarking different models, considering both their original coefficients and those adjusted to local conditions. The results reveal that the monthly version of the TGIY and the daily version of the TDIY show the best overall fit to the long-term dataset. TIYs obtained from illuminance data are also observed to be statistically indistinguishable from those obtained after applying a luminous efficacy model to an irradiance-based TRY.
  • PublicationOpen Access
    A GIS-based methodology for assigning experimental measurements of angular distribution of sky radiance and luminance to selected sky sectors
    (Elsevier, 2019) García Ruiz, Ignacio; García Gorostiaga, M. Almudena; Torres Escribano, José Luis; Ingeniería; Ingeniaritza; Institute of Smart Cities - ISC
    Mathematical models for the estimation of the angular distribution of diffuse radiance/luminance in the sky describe the anisotropic character of diffuse solar radiation and daylight in the sky vault. In most of these models the radiance/luminance of a sky point is determined by the product of the indicatrix function and the gradation function. When developing and/or calibrating these models, it is typical to consider separately the dispersion effects in the direction of the sun's rays and the gradation from the zenith towards the horizon. To do this, the sky is divided into a number of concentric spherical zones around the sun and a number of concentric spherical zones around the zenith. The intersection between both sets of zones delimits a series of sky elements. Unfortunately, these sky elements do not correspond to the 145 patches of sky vault recommended by the International Commission on Illumination (CIE), which are routinely scanned by the existing commercial sky scanners. The identification of the sky elements, geometrically different from those observed by commercial sky scanners, and the assignation of the radiance/luminance values registered by such sky scanners are not analytically trivial tasks. A GISbased methodology is presented in this work to undertake these goals.
  • PublicationOpen Access
    Temporal downscaling of test reference years: effects on the long-term evaluation of photovoltaic systems
    (Elsevier, 2018) García Ruiz, Ignacio; Torres Escribano, José Luis; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak
    Representative meteorological data from a given location are necessary to assess the long-term performance of photovoltaic (PV) systems. Test reference years (TRYs) or typical meteorological years (TMYs) are widely used as input to PV models. Most of current procedures propose the construction of TRYs by concatenating 12 months belonging to different years of a dataset. This paper evaluates the effects of the temporal downscaling of typical periods that compose different TRYs on the long-term assessment of PV systems. The Festa-Ratto TRY, WYSS, EN ISO 15927-4 TRY, TMY3, TGY and TDY are used. Thus, an adapted version of these six methodologies aimed at the selection of typical days rather than months is proposed. The electricity production obtained by simulation for daily and monthly TRYs is compared with simulations performed for each actual year of the dataset. This analysis is performed for seven locations in the USA considering a 5.6 kWp grid-connected PV system. The results reveal that the timescale reduction improves the behavior of Festa-Ratto TRY, WYSS, TMY3, TDY and TDY when estimating the long-term production of a PV system considering the hourly, daily, monthly and annual timescales, while the modified EN ISO 15927-4 TRY performs worse than its monthly version.