Person:
Giménez Díaz, Rafael

person.page.identifierURI

https://academica-e.unavarra.es/handle/2454/49147

Last Name

Giménez Díaz

First Name

Rafael

person.page.departamento

Ingeniería

person.page.instituteName

IS-FOOD. Research Institute on Innovation & Sustainable Development in Food Chain

ORCID

0000-0003-3210-0578

person.page.upna

6698

Full item page

Search Results

Now showing 1 - 10 of 14

Open Access
In-situ assessment of the spatial arrangement of step-pool units on eroded rills
(wiley, 2019) Govers, G.; Campo-Bescós, Miguel; Zubieta Laseca, Elena; Giménez Díaz, Rafael; Ingeniaritza; Institute on Innovation and Sustainable Development in Food Chain - ISFOOD; Ingeniería
Open Access
Assessing hillslope-channel connectivity in an agricultural catchment using rare-earth oxide tracers and random forests models
(Universidad de la Rioja, 2017) Masselink, Rens Hein; Temme, A.J.A.M.; Giménez Díaz, Rafael; Casalí Sarasíbar, Javier; Keesstra, Saskia D.; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak; Institute on Innovation and Sustainable Development in Food Chain - ISFOOD
Soil erosion from agricultural areas is a large problem because of off-site effects like the rapid filling of reservoirs. To mitigate the problem of sediments from agricultural areas reaching the channel, reservoirs and other surface areas it is important to understand hillslope-channel connectivity and catchment connectivity. To determine the functioning of hillslope-channel connectivity and the continuation of transport of these sediments in the channel, it is necessary to obtain data on sediment transport from the hillslopes to the channels. Simultaneously, the factors that influence sediment export out of the catchment need to be studied. For measuring hillslope-channel sediment connectivity, rare-earth oxide (REO) tracers were applied to a hillslope in an agricultural catchment in Navarre, Spain, preceding the winter of 2014-2015. The results showed that during the winter no sediment transport from the hillslope to the channel was detected. To test the implication of the REO results at the catchment scale, two contrasting conceptual models for sediment connectivity were assessed using a random forest (RF) machine learning method. The RF method was applied using a 15-year period of measured sediment output at the catchment scale. One model proposes that small events provide sediment for large events, while the other proposes that only large events cause sediment detachment and small events subsequently remove these sediments from near and in the channel. For sediment yield prediction of small events, variables related to large preceding events were the most important. The model for large events underperformed and, therefore, we could not draw any immediate conclusions whether small events influence the amount of sediment exported during large events. Both REO tracers and RF method showed that low intensity events do not contribute any sediments from the hillslopes to the channel in Latxaga catchment. Sediment dynamics are dominated by sediment mobilization during large (high intensity) events. Sediments are for a large part exported during those events, but the system shows a memory of the occurrence of these large events, suggesting that large amounts of sediments are deposited in and near the channel after these events. These sediments are gradually removed by small events. To better understand the delivery if sediments to the channel and how large and small events influence each other, more field data on hillslope-channel connectivity and within-channel sediment dynamics is necessary.
Open Access
On the influence of spatial resolution in soil surface roughness characterization using Tls and Sfm techniques
(IEEE, 2018) Martínez de Aguirre Escobar, Alejandro; Álvarez Mozos, Jesús; Giménez Díaz, Rafael; Milenković, Milutin; Pfeifer, Norbert; Ingeniería; Ingeniaritza
Soil surface roughness strongly affects the scattering of microwaves and determines the backscattering coefficient observed by SAR (Synthetic Aperture Radar) sensors. The aim of this study is to analyze the influence of the spatial resolution of Terrestrial Laser Scanner (TLS) and Structure from Motion (SfM) techniques to parameterize surface roughness over agricultural soils. Three experimental plots (5 x 5 meters) representing different roughness conditions were measured by TLS and SfM techniques. Roughness parameters (s and l) were calculated from profiles obtained at different spatial resolutions in parallel and in perpendicular to the tillage direction on each plot. The results showed minor differences in the parameters values between both techniques and, in general, a decreasing trend and an increasing trend for lower spatial resolutions for parameter s and l, respectively.
Open Access
Assessment of soil factors controlling ephemeral gully erosion on agricultural fields
(Wiley, 2017) Ollobarren del Barrio, Paul; Campo-Bescós, Miguel; Giménez Díaz, Rafael; Casalí Sarasíbar, Javier; Landa Ingeniaritza eta Proiektuak; Institute on Innovation and Sustainable Development in Food Chain - ISFOOD; Proyectos e Ingeniería Rural; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
The soil factor is crucial in controlling and properly modeling the initiation and development of ephemeral gullies (EGs). Usually, EG initiation has been related to various soil properties (i.e. sealing, critical shear stress, moisture, texture, etc.); meanwhile, the total growth of each EG (erosion rate) has been linked with proper soil erodibility. But, despite the studies to determine the influence of soil erodibility on (ephemeral) gully erosion, a universal approach is still lacking. This is due to the complex relationship and interactions between soil properties and the erosive process. A feasible soil characterization of EG erosion prediction on a large scale should be based on simple, quick and inexpensive tests to perform. The objective of this study was to identify and assess the soil properties – easily and quickly to determine – which best reflect soil erodibility on EG erosion. Forty‐nine different physical–chemical soil properties that may participate in establishing soil erodibility were determined on agricultural soils affected by the formation of EGs in Spain and Italy. Experiments were conducted in the laboratory and in the field (in the vicinity of the erosion paths). Because of its importance in controlling EG erosion, five variables related to antecedent moisture prior to the event that generated the gullies and two properties related to landscape topography were obtained for each situation. The most relevant variables were detected using multivariate analysis. The results defined 13 key variables: water content before the initiation of EGs, organic matter content, cation exchange capacity, relative sealing index, two granulometric and organic matter indices, seal permeability, aggregates stability (three index), crust penetration resistance, shear strength and an erodibility index obtained from the Jet Test erosion apparatus. The latter is proposed as a useful technique to evaluate and predict soil loss caused by EG erosion.
Open Access
Influence of surface roughness sample size for C-band SAR backscatter applications on agricultural soils
(IEEE, 2017) Martínez de Aguirre Escobar, Alejandro; Álvarez Mozos, Jesús; Lievens, Hans; Verhoest, Niko E. C.; Giménez Díaz, Rafael; Landa Ingeniaritza eta Proiektuak; Institute on Innovation and Sustainable Development in Food Chain - ISFOOD; Proyectos e Ingeniería Rural
Soil surface roughness determines the backscatter coefficient observed by radar sensors. The objective of this letter was to determine the surface roughness sample size required in synthetic aperture radar applications and to provide some guidelines on roughness characterization in agricultural soils for these applications. With this aim, a data set consisting of ten ENVISAT/ASAR observations acquired coinciding with soil moisture and surface roughness surveys has been processed. The analysis consisted of: 1) assessing the accuracies of roughness parameters s and l depending on the number of 1-m-long profiles measured per field; 2) computing the correlation of field average roughness parameters with backscatter observations; and 3) evaluating the goodness of fit of three widely used backscatter models, i.e., integral equation model (IEM), geometrical optics model (GOM), and Oh model. The results obtained illustrate a different behavior of the two roughness parameters. A minimum of 10-15 profiles can be considered sufficient for an accurate determination of s, while 20 profiles might still be not enough for accurately estimating l. The correlation analysis revealed a clear sensitivity of backscatter to surface roughness. For sample sizes >15 profiles, R values were as high as 0.6 for s and ~0.35 for l, while for smaller sample sizes R values dropped significantly. Similar results were obtained when applying the backscatter models, with enhanced model precision for larger sample sizes. However, IEM and GOM results were poorer than those obtained with the Oh model and more affected by lower sample sizes, probably due to larger uncertainly of l.
Open Access
Factors controlling sediment export in a small agricultural watershed in Navarre (Spain)
(Elsevier, 2012) Giménez Díaz, Rafael; Casalí Sarasíbar, Javier; Grande Esteban, Ildefonso; Díez Beregaña, Javier; Campo-Bescós, Miguel; Álvarez Mozos, Jesús; Goñi Garatea, Mikel; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak; Gestión de Empresas; Enpresen Kudeaketa; Gobierno de Navarra / Nafarroako Gobernua
It is recognised that the hydrological and erosion processes in watersheds are very much conditioned by the (inter)action of a number of variables. This paper covers a 15-year period of studying those factors that have a major influence on the sediment yield and transport during individual hydrological events in a small Mediterranean agricultural watershed. Multivariate statistical techniques such as cluster analysis and principal component analysis were applied for the interpretation of datasets. In addition, the relationships between suspended sediment concentration and discharge (hysteretic loops) were also analysed. The hydrological response of the studied watershed is mainly controlled by the antecedent condition of the flow. Most of the runoff and sediment are generated during the wet season when vegetation cover is scant and saturation overland flow occurs promptly as a response to almost any rainfall events. In contrast, during the dry seasons even if high-intensity rainfalls normally occur, very scant runoffs are, however recorded, at the exit of the watershed. Most of the eroded sediment seems to come from riparian areas. The discharge registered at the watershed outlet up to 1 h prior to the flood is a very good surrogate for antecedent soil moisture.
Open Access
Hydrological signatures based on event runoff coefficients in rural catchments of the Iberian Peninsula
(Wolters Kluwer, 2017) Taguas, Encarnación V.; Nadal-Romero, Estela; Ayuso, José L.; Casalí Sarasíbar, Javier; Cid, Patricio; Dafonte, Jorge; Canatário-Duarte, Antonio; Ferreira, Carla S.S.; Giménez Díaz, Rafael; Giráldez Cervera, Juan Vicente; Gómez-Macpherson, Helena; Gómez, Jose A.; González-Hidalgo, J. Carlos; Lana Renault, Noemí; Lucía, Ana; Mateos, Luciano; Pérez, Rafael; Rodríguez-Blanco, M. Luz; Schnabel, Susanne; Serrano-Muela, M. Pilar; Taboada-Castro, M. Mercedes; Zabaleta, Ane; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak
Hydrological signatures are indices that help to describe the behavior of catchments. These indices can also be used to transfer information from gauged to ungauged catchments. In this study, different approaches were evaluated to determine volumetric runoff coefficients in 18 small/ medium experimental gauged catchments of the Iberian Peninsula and to fit runoff calculations based on precipitation data for gauged and ungauged catchments. Using data derived from 1962 events, rainfall-runoff relationships were characterized and compared in order to evaluate the various hydrological response patterns. Volumetric runoff coefficients and cumulative runoff and precipitation ratios of the events that generated runoff (Rcum) minimized the root mean square error. A linear fit for the estimation of Rcum in ungauged atchments was based on mean annual precipitation, rates of infiltration, the fraction of forest-land use, and the catchment channel length. Despite high catchment heterogeneity, Rcum resulted in a suitable parameter to evaluate hydrological variability in rural gauged and ungauged catchments. In 50% of the catchments, the precipitation accounted for less than 50% of the runoff variation. Annual precipitation, antecedent rainfall, and base flow did not have a high significance in rainfall-runoff relationships, which illustrates the heterogeneity of hydrological responses. Our results highlight the need for signature characterizations of small/medium rural catchments because they are the sources of runoff and sediment discharge into rivers, and it is more economical and efficient to take action to mitigate runoff in rural locations.
Open Access
Evaluation of surface roughness parameters in agricultural soils with different tillage conditions using a laser profile meter
(Elsevier, 2016) Martínez de Aguirre Escobar, Alejandro; Álvarez Mozos, Jesús; Giménez Díaz, Rafael; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak
Surface roughness crucially affects the hydrological and erosive behaviours of soils. In agricultural areas surface roughness is directly related to tillage, whose action strongly affects the key physical properties of soils and determines the occurrence and fate of several processes (e.g., surface storage, infiltration, etc.). The characterisation of surface roughness as a result of tillage operations is not straightforward, and numerous parameters and indices have been proposed for quantifying it. In this article, a database of 164 profiles (each 5 m long), measured in 5 different roughness classes, was analysed. Four roughness classes corresponded to typical tillage operations (i.e., mouldboard, harrow, seedbed, etc.), and the fifth represented a seedbed soil that was subject to rainfall. The aim of the research was to evaluate and select the surface roughness parameters that best characterised and quantified the surface roughness caused by typical tillage operations. In total, 21 roughness parameters (divided into 4 categories) were assessed. The parameters that best separated and characterised the different roughness classes were the limiting elevation difference (LD) and the Mean Upslope Depression index (MUD); however, the parameters most sensitive to rainfall action on seedbed soils were limiting slope (LS) and the crossover lengths measured with the semivariogram method (lSMV) and the root mean square method (lRMS). Many parameters had high degrees of correlation with each other, and therefore gave almost identical information. The results of this study may contribute to the understanding of the surface roughness phenomenon and its parameterisation in agricultural soils.
Open Access
Runoff, nutrients, sediment and salt yields in an irrigated watershed in southern Navarre (Spain)
(Elsevier, 2018) Merchán Elena, Daniel; Casalí Sarasíbar, Javier; Valle de Lersundi, Jokin del; Campo-Bescós, Miguel; Giménez Díaz, Rafael; Preciado, Beatriz; Lafarga, Alberto; Landa Ingeniaritza eta Proiektuak; Institute on Innovation and Sustainable Development in Food Chain - ISFOOD; Proyectos e Ingeniería Rural
The environmental impact of irrigated agriculture on water quality was assessed in Landazuria watershed (Navarre, northeast Spain), a 479.5 ha watershed with 53% of irrigated agricultural land. In the framework of a long-term monitoring program, precipitation and discharge were measured at 10-min intervals and compound daily water samples were collected during the agricultural years (September to August) 2007–2016, and analysed for nitrate (NO3−), phosphate (PO43−), sediment and total dissolved solids (TDS) concentrations. Typical agricultural management (including crop surfaces, irrigation and fertilization rates) was obtained from inquiries to farmers. Concentration and yield of the studied variables presented a high degree of variation, both intra- and inter-annual. Median concentration for the entire study period were 185, <0.05, 31 and 2284 mg L−1 for NO3−, PO43−, sediment and TDS, respectively. NO3−-N and PO43−-P yields averaged 74 and 0.04 kg ha−1 year−1, respectively. NO3 −-N yield was higher than in other agricultural land uses in Navarre and in the order of magnitude of other irrigated areas in the Middle Ebro Valley. PO43−-P yield was in the same order of magnitude than in rainfed watersheds in Navarre but lower than in intensively grazed watersheds. Sediment yield was extremely variable, averaging 360 kg ha−1 year−1, with 44% of the total measured load recorded in a few days. It was in the lower range of those measured in Navarre for rainfed agriculture and similar to those estimated in other irrigated areas of the Middle Ebro River. TDS concentration presented a significant decreasing trend since available salts were being washed out, while TDS yield averaged 1.8 Mg ha−1 year−1. Long-term monitoring of irrigated areas is required to understand pollution processes in these agroecosystems and to adequately characterize the environmental impact of current agricultural practices on water quality, in order to implement, and adequately assess, measures to reduce agricultural pollution.
Open Access
Gully geometry: what are we measuring?
(European Geosciences Union, 2015) Casalí Sarasíbar, Javier; Giménez Díaz, Rafael; Campo-Bescós, Miguel; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak
Much of the research on (ephemeral) gully erosion comprises the determination of the geometry of these eroded channels, especially their width and depth. This is not a simple task due to uncertainty generated by the wide range of variability in gully cross section shapes found in the field. However, in the literature, this uncertainty is not recognized so that no criteria for their measurement are indicated. The aim of this work is to make researchers aware of the ambiguity that arises when characterizing the geometry of an ephemeral gully and similar eroded channels. In addition, a measurement protocol is proposed with the ultimate goal of pooling criteria in future works. It is suggested that the geometry of a gully could be characterized through its mean equivalent width and mean equivalent depth, which, together with its length, define an “equivalent prismatic gully” (EPG). The latter would facilitate the comparison between different gullies.