Rodríguez García, Antonio

Loading...
Profile Picture

Email Address

Birth Date

Job Title

Last Name

Rodríguez García

First Name

Antonio

person.page.departamento

Ingeniería

person.page.instituteName

ISC. Institute of Smart Cities

person.page.observainves

person.page.upna

Name

Search Results

Now showing 1 - 3 of 3
  • PublicationOpen Access
    Effect of thermoelectric subcooling on COP and energy consumption of a propane heat pump
    (Elsevier, 2024-12-01) Aranguren Garacochea, Patricia; Sánchez, Daniel; Haida, Michal; Smolka, Jacek; Cabello, Ramón; Rodríguez García, Antonio; Astrain Ulibarrena, David; Ingeniería; Ingeniaritza; Institute of Smart Cities - ISC; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
    The building sector has an important impact on the environment, being responsible for 30 % of the total greenhouse gas emissions. Knowing that the energy consumption devoted to HVAC systems accounts for 50 % of the total energy consumption of buildings, it is paramount to develop environmentally friendly technologies able to provide green space heating to the building sector. To that purpose, this manuscript presents a computational study on propane vapor compression heat pumps which include thermoelectric subcooling to boost their operation. The combination of these technologies has been proven in the past to be very beneficial for refrigeration systems and this study concludes for the first time that propane heat pumps can highly benefit from thermoelectric subcooling. The widely conducted research includes the following parameters: ambient temperatures from -20 to 15 °C, voltage supplies to the thermoelectric modules from 0.5 to 10 VDC, number of thermoelectric subcooling blocks from 1 to 8 and two water inlet temperatures, 40 and 55 °C to study their influence on heating capacity, compressor and thermoelectric power consumptions, subcooling degree, propane mass flow, compressor capacity, COP, energy consumption and SCOP of the combined heat pump. The obtained results are very conclusive, COP enhancements up to 12.29 % are achieved when a thermoelectric subcooler with 16 modules is included in a propane heat pump already provided with an internal heat exchanger for an ambient temperature of -20 °C and a water inlet temperature of 55 °C. Additionally, improvements in Seasonal COP up to 9.98 % are achieved if the above-mentioned technologies integration between a vapor compression heat pump and a thermoelectric subcooler substitutes a conventional propane heat pump with an internal heat exchanger for space heating a single-story two-family house.
  • PublicationOpen Access
    Thermoelectrics working in favour of the natural heat flow to actively control the heat dissipation
    (Elsevier, 2024) Alzuguren Larraza, Iñaki; Aranguren Garacochea, Patricia; Casi Satrústegui, Álvaro; Erro Iturralde, Irantzu; Rodríguez García, Antonio; Ingeniería; Ingeniaritza; Institute of Smart Cities - ISC; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
    In sectors such as electronics, photonics and HVAC and refrigeration, heat dissipation has a major impact in their performance. However, there is generally not much control over this effect. Thus, one way of making these units more controllable would be to include thermoelectric technology in the heat dissipation systems. Therefore, in this work, a computational model based on the resistance-capacitance model to solve a thermoelectrically aided heat dissipation system is proposed, considering all the thermoelectric effects, temperature dependent thermoelectric properties and four temperature levels. Besides, an experimental prototype has been built to assess the real performance of thermoelectric modules (TEM) working under different operating conditions. Additionally, these results have been used to validate the computational model, obtaining maximum errors of ±6% in the main parameters. Moreover, the computational model has been used to simulate the effect of modifying the temperature difference between the hot and cold sources and the thermal resistances of the heatsinks located on both sides of the TEMs. The results show that the thermoelectrically aided dissipation system would be beneficial when working with low temperature differences and low thermal resistance values of the heatsinks, especially on the heatsink located on the hot side of the TEMs.
  • PublicationOpen Access
    Advanced phase-change intermediate heat exchanger development for multistage thermoelectric heat pumps
    (Elsevier, 2023) Erro Iturralde, Irantzu; Aranguren Garacochea, Patricia; Alegría Cía, Patricia; Rodríguez García, Antonio; Astrain Ulibarrena, David; Institute of Smart Cities - ISC; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
    The need to reach a full energy decarbonisation is well known. Heating and cooling consumption is almost half of the global energy end-use. Thus, development of low-carbon and highly efficient power-to-heat technologies must be developed. In this work, the use of thermoelectric technology working as a heat pump is proposed to heat up an airflow of 38 m3/h. Two different prototypes of multistage thermoelectric heat pumps have been developed and compared based on monophasic and phase-change intermediate heat exchangers. The reduced thermal resistance obtained for the novel phase-change heat exchanger increases the heat flux supplied to the airflow and reduces the consumed power of the system, outperforming the operation of the monophasic thermoelectric heat pump between a 30 and a 67 %. The novel multistage phase-change heat pump obtains experimental COP values between 3.25 and 1.26 when the airflow rises its temperature from 3.5 °C to 23.5 °C. Additionally, this experimental study proves a new methodology to calculate the supplied heat flux to the airflow. The validation of this technology proves a discrepancy of ± 9 % when this novel technology is compared to the conventional one based on the airflow temperature rise.