Recarte Callado, Vicente
Loading...
Email Address
person.page.identifierURI
Birth Date
Job Title
Last Name
Recarte Callado
First Name
Vicente
person.page.departamento
Ciencias
person.page.instituteName
InaMat2. Instituto de Investigación en Materiales Avanzados y Matemáticas
ORCID
person.page.observainves
person.page.upna
Name
- Publications
- item.page.relationships.isAdvisorOfPublication
- item.page.relationships.isAdvisorTFEOfPublication
- item.page.relationships.isAuthorMDOfPublication
10 results
Search Results
Now showing 1 - 10 of 10
Publication Open Access Long-range atomic order and entropy change at the martensitic transformation in a Ni-Mn-In-Co metamagnetic shape memory alloy(MDPI, 2014) Sánchez-Alarcos Gómez, Vicente; Recarte Callado, Vicente; Pérez de Landazábal Berganzo, José Ignacio; Cesari, Eduard; Rodríguez Velamazán, José Alberto; Física; FisikaThe influence of the atomic order on the martensitic transformation entropy change has been studied in a Ni-Mn-In-Co metamagnetic shape memory alloy through the evolution of the transformation temperatures under high-temperature quenching and post-quench annealing thermal treatments. It is confirmed that the entropy change evolves as a consequence of the variations on the degree of L21 atomic order brought by thermal treatments, though, contrary to what occurs in ternary Ni-Mn-In, post-quench aging appears to be the most effective way to modify the transformation entropy in Ni-Mn-In-Co. It is also shown that any entropy change value between around 40 and 5 J/kgK can be achieved in a controllable way for a single alloy under the appropriate aging treatment, thus bringing out the possibility of properly tune the magnetocaloric effect.Publication Open Access Study of the martensitic transition in Ni-Mn-Sn-Ti ferromagnetic shape memory alloys(Rede Latino-Americana de Materiais, 2018) Bonifacich, Federico Guillermo; Lambri, Osvaldo Agustín; Pérez de Landazábal Berganzo, José Ignacio; Recarte Callado, Vicente; Sánchez-Alarcos Gómez, Vicente; Fisika; Institute for Advanced Materials and Mathematics - INAMAT2; Física; Universidad Pública de Navarra / Nafarroako Unibertsitate PublikoaIn the present work, mechanical spectroscopy measurements as a function of temperature and strain have been performed in (at.%) Ni50Mn37Sn13-xTix (x=0, 0.5 and 2) ferromagnetic shape memory alloys in order both to study martensitic transition phenomenon and also to determine its temperature of appearance. For mechanical spectroscopy measurements, a five elements piezoelectric device recently developed has been used. In addition, other characterization techniques as, differential thermal analysis and superconducting quantum interference magnetic spectroscopy, were also used. Besides, relaxation processes near the martensitic transition temperature have been also observed.Publication Open Access Giant direct and inverse magnetocaloric effect linked to the same forward martensitic transformation(Springer Nature, 2017) Pérez de Landazábal Berganzo, José Ignacio; Recarte Callado, Vicente; Sánchez-Alarcos Gómez, Vicente; Beato López, Juan Jesús; Rodríguez Velamazán, José Alberto; Sánchez Marcos, J.; Gómez Polo, Cristina; Cesari, Eduard; Fisika; Institute for Advanced Materials and Mathematics - INAMAT2; FísicaMetamagnetic shape memory alloys have aroused considerable attraction as potential magnetic refrigerants due to the large inverse magnetocaloric effect associated to the magnetic-field-induction of a reverse martensitic transformation (martensite to austenite). In some of these alloys, the austenite phase can be retained on cooling under high magnetic fields, being the retained phase metastable after field removing. Here, we report a giant direct magnetocaloric effect linked to the anomalous forward martensitic transformation (austenite to martensite) that the retained austenite undergoes on heating. Under moderate fields of 10 kOe, an estimated adiabatic temperature change of 9 K has been obtained, which is (in absolute value) almost twice that obtained in the conventional transformation under higher applied fields. The observation of a different sign on the temperature change associated to the same austenite to martensite transformation depending on whether it occurs on heating (retained) or on cooling is attributed to the predominance of the magnetic or the vibrational entropy terms, respectively.Publication Open Access Experimental observation of vacancy-assisted martensitic transformation shift in Ni-Fe-Ga alloys(American Physical Society, 2019) Unzueta, Iraultza; Alonso de Robador Lorente, Daniel; Cesari, Eduard; Sánchez-Alarcos Gómez, Vicente; Recarte Callado, Vicente; Pérez de Landazábal Berganzo, José Ignacio; García, José Ángel; Plazaola, Fernando; Zientziak; Institute for Advanced Materials and Mathematics - INAMAT2; CienciasPositron annihilation lifetime spectroscopy is used to experimentally demonstrate the direct relationship between vacancies and the shift of the martensitic transformation temperature in a Ni55Fel7Ga28 alloy. The evolution of vacancies assisting the ordering enables shifts of the martensitic transformation up to 50 K. Our results confirm the role that both vacancy concentration and different vacancy dynamics play in samples quenched from the L2(1) and B2 phases, which dictate the martensitic transformation temperature and its subsequent evolution. Finally, by electron-positron density functional calculations V-Ni is identified as the most probable vacancy present in Ni55Fe17Ga28. This work evidences the capability of vacancies for the fine-tuning of the martensitic transformation temperature, paving the way for defect engineering of multifunctional properties.Publication Open Access Routes for enhanced magnetism in Ni-Mn-In metamagnetic shape memory alloys(Elsevier, 2019) López García, Javier; Sánchez-Alarcos Gómez, Vicente; Recarte Callado, Vicente; Pérez de Landazábal Berganzo, José Ignacio; Fabelo, O.; Cesari, Eduard; Rodríguez Velamazán, José Alberto; Zientziak; Institute for Advanced Materials and Mathematics - INAMAT2; CienciasThe authors provide in-depth physical insight into the enhancement of the magnetic properties of metamagnetic shape memory alloys produced by thermal treatment and cobalt doping. They use neutron scattering to study the atomic order and magnetic structures in the austenitic phases of Ni50Mn34In16 and Ni45Co5Mn37In13 alloys in two different states induced by thermal treatments. The increase of the magnetization in the austenite phase, particularly by cobalt doping, is explained by the enhanced ferromagnetic coupling between the magnetic moments located in octahedral sites. The spin density maps obtained from polarized neutron diffraction reveal the magnetic interaction pathways responsible for this coupling scheme.Publication Open Access Magnetocaloric effect enhancement driven by intrinsic defects in a Ni45Co5Mn35Sn15 alloy(Elsevier, 2019) Sánchez-Alarcos Gómez, Vicente; López García, Javier; Unzueta, Iraultza; Pérez de Landazábal Berganzo, José Ignacio; Recarte Callado, Vicente; Beato López, Juan Jesús; García, José Ángel; Plazaola, Fernando; Rodríguez Velamazán, José Alberto; Fisika; Institute for Advanced Materials and Mathematics - INAMAT2; FísicaThe influence of mechanically-induced defects on the magnetostructural properties is analyzed in a Ni-Co-Mn-Sn alloy subjected to soft milling and subsequent annealing treatments. It is found that, opposite to what occurs in Ni-Mn-Sn ternary alloys, the annealing treatment affects the magnetic properties in a different way in martensite and in austenite. In particular, the saturation magnetization significantly increases in martensite after annealing whereas just a very slight variation is observed in austenite. This leads to the interesting fact that the presence of microstructural defects, far for worsening, makes the magnetocaloric effect to be higher in the as-milled state than after annealing. This behavior is explained as the result of the combination of the effect of defects on the Mn-Mn distance, the effect of Co on the magnetic exchange coupling between Mn atoms, and the effect of defects on the vibrational entropy change at the martensitic transformation.Publication Open Access 119Sn Mössbauer spectroscopy for assessing the local stress and defect state towards the tuning of Ni-Mn-Sn alloys(AIP Publishing, 2017) Unzueta, Iraultza; López García, Javier; Sánchez-Alarcos Gómez, Vicente; Recarte Callado, Vicente; Pérez de Landazábal Berganzo, José Ignacio; Fisika; Institute for Advanced Materials and Mathematics - INAMAT2; FísicaThe influence of defects and local stresses on the magnetic properties and martensitic transformation in Ni50Mn35Sn15 is studied at macroscopic and atomic scale levels. We show that both the structural and magnetic properties of the alloy are very sensitive to slight microstructural distortions. Even though no atomic disorder is induced by milling, the antiphase boundaries linked to dislocations promote the antiferromagnetic coupling of Mn, resulting in a significant decrease in the saturation magnetization. On the other hand, the temperature range of the transformation is considerably affected by the mechanically induced local stresses, which in turn does not affect the equilibrium temperature between the austenitic and martensitic phases. Finally, we demonstrate that the recovery of the martensitic transformation is directly related to the intensity of the non-magnetic component revealed by 119Sn Mössbauer spectroscopy. This result opens the possibility of quantifying the whole contribution of defects and the local stresses on the martensitic transformation in Ni-Mn-Sn alloys.Publication Open Access Influence of defects on the irreversible phase transition in the Fe-Pd doped with Co and Mn(Rede Latino-Americana de Materiais, 2018) Bonifacich, Federico Guillermo; Lambri, Osvaldo Agustín; Pérez de Landazábal Berganzo, José Ignacio; Recarte Callado, Vicente; Sánchez-Alarcos Gómez, Vicente; Fisika; Institute for Advanced Materials and Mathematics - INAMAT2; Física; Universidad Pública de Navarra / Nafarroako Unibertsitate PublikoaThe appearance of BCT martensite in Fe-Pd-based ferromagnetic shape memory alloys, which develops at lower temperatures than the thermoelastic martensitic transition, deteriorates the shape memory properties. In a previous work performed in Fe70Pd30, it was shown that a reduction in defects density reduces the non thermoelastic FCT-BCT transformation temperature. In the present work, the influence of quenched-in-defects upon the intensity and temperature of the thermoelastic martensitic (FCC-FCT) and the non thermoelastic (FCT-BCT) transitions in Fe-Pd doped with Co and Mn is studied. Differential scanning calorimetric and mechanical spectroscopy studies demonstrate that a reduction in the dislocation density the stability range of the FCC-FCT reversible transformation in Fe67Pd30Co3 and Fe66.8Pd30.7Mn2.5 ferromagnetic shape memory alloys.Publication Open Access Outstanding role of the magnetic entropy in arrested austenite in an ordered Ni45Mn36.7In13.3Co5 metamagnetic shape memory alloy(Elsevier, 2019) Pérez de Landazábal Berganzo, José Ignacio; Recarte Callado, Vicente; Sánchez-Alarcos Gómez, Vicente; Jiménez Ruiz, M.; Cesari, Eduard; Zientziak; Institute for Advanced Materials and Mathematics - INAMAT2; CienciasThe relevance of the entropy and in particular the outstanding role of the magnetic contribution is analyzed in a non-equilibrium arrested austenite phase in a Ni 45 Mn 36.7 In 13.3 Co 5 metamagnetic shape memory alloy. The Debye and Bragg-Williams approximations have been used to analyze and quantify the vibrational and magnetic contributions respectively, to the total entropy change linked to the martensitic transformation. The sign on the entropy change associated to the forward austenite to martensite transformation is different depending on whether it occurs at low or at high temperature as a consequence of the different vibrational and magnetic contributions.Publication Open Access Identification of a Ni-vacancy defect in Ni-Mn-Z (Z = Ga, Sn, In): an experimental and DFT positron-annihilation study(American Physical Society, 2019) Unzueta, Iraultza; Sánchez-Alarcos Gómez, Vicente; Recarte Callado, Vicente; Pérez de Landazábal Berganzo, José Ignacio; Zabala, Nerea; García, José Ángel; Plazaola, Fernando; Zientziak; Institute for Advanced Materials and Mathematics - INAMAT2; CienciasBy means of experimental positron-annihilation-lifetime measurements and theoretical density functional theory (DFT) positron-lifetime calculations, vacancy-type defects in Ni50Mn50−xSnx (x = 25, 20, 15, 13, 10) and Ni50Mn50−xInx (x = 25, 20, 16, 13) systems are systematically studied. The study is extended to Ni-Mn-Ga systems as well. Experimental results are complemented with electron-positron DFT calculations carried out within the local density approximation and generalized gradient approximation, where five different parametrizations accounting for the γ (r) enhancement factor are analyzed. Theoretical results indicate that the Boronski-Nieminen parametrization of γ (r) is the one that best predicts the experimental results, which ultimately enables us to identify VNi as the vacancy present in the studied samples. The characteristic positron lifetime related to VNi ranges between 181 and 191 ps in Ni-Mn-Sn/In systems. Positron-annihilation-lifetime spectroscopy results in these two systems delimit the lower bound of the achievable vacancy concentration, which is much larger compared with the reported values in Ni-Mn-Ga systems. The present work, along with setting the basis for positron simulations in Ni-Mn based Heusler alloys, delimits the effect that the variation of vacancies has in the martensitic transformation in Ni-Mn-Sn systems.