Person: Villanueva Roldán, Pedro
Loading...
Email Address
person.page.identifierURI
Birth Date
Research Projects
Organizational Units
Job Title
Last Name
Villanueva Roldán
First Name
Pedro
person.page.departamento
Ingeniería
person.page.instituteName
ORCID
0000-0003-0865-3789
person.page.upna
2772
Name
22 results
Search Results
Now showing 1 - 10 of 22
Publication Open Access Mechanical properties dependency of the pearlite content of ductile iron(Association for Computational Materials Science and Surface Engineering, 2009) Gonzaga Jarquín, Rafael; Martínez Landa, Paulino; Pérez Ezcurdia, Amaya; Villanueva Roldán, Pedro; Ingeniería; IngeniaritzaPublication Open Access Advances in robotic welding for metallic materials: application of inspection, modeling, monitoring and automation techniques(MDPI, 2023) Curiel Braco, David; Veiga Suárez, Fernando; Suárez, Alfredo; Villanueva Roldán, Pedro; Ingeniería; IngeniaritzaThe robotic welding manufacturing of metal parts is a very important process, especially in heavy industries such as shipbuilding, oil and gas, automotive, and aerospace. There is a great variety of different techniques for manufacturing by robotic welding, and the welding operations are always in a constant process of evolution, as any advance can be significant to avoid defects during the welding process. Although a great deal of research work has been carried out in recent years, thanks to which results and reviews have been presented on this subject, the main aim of this publication is to define and review works that show the advances in the main inspection, modeling, monitoring, and automated operations during the welding process to avoid, or predictively identify, any possible defect in order to obtain an optimum degree of quality in the welding.Publication Open Access Design and optimization of an electromagnetic servo braking system combining finite element analysis and weight-based multi-objective genetic algorithms(Springer, 2016) Lostado Lorza, Rubén; Villanueva Roldán, Pedro; Fernández Martínez, Roberto; Mac Donald, Bryan J.; Ingeniería; IngeniaritzaPublication Open Access Weld joint reconstruction and classification algorithm for trajectory generation in robotic welding(Trans Tech Publications, 2023) Curiel Braco, David; Veiga Suárez, Fernando; Suárez, Alfredo; Villanueva Roldán, Pedro; Aldalur, Eider; Ingeniería; IngeniaritzaPublication Open Access Benefits of aeronautical preform manufacturing through arc-directed energy deposition manufacturing(MDPI, 2023) Suárez, Alfredo; Ramiro, Pedro; Veiga Suárez, Fernando; Ballesteros Egüés, Tomás; Villanueva Roldán, Pedro; Ingeniería; IngeniaritzaThe paper introduces an innovative aerospace component production approach employing Wire Arc Additive Manufacturing (WAAM) technology to fabricate near-finished preforms from Ti6Al4V titanium. Tensile tests on WAAM Ti6Al4V workpieces demonstrated reliable mechanical properties, albeit with identified anisotropic behavior in horizontal samples, underscoring the need for optimization. This alternative manufacturing strategy addresses the challenges associated with machining forged preforms, marked by a high Buy To Fly (BTF) ratio (>10), leading to material wastage, prolonged machining durations, elevated tool expenses, and heightened waste and energy consumption. Additionally, logistical and storage costs are increased due to extended delivery timelines, exacerbated by supply issues related to the current unstable situation. The utilization of WAAM significantly mitigates initial BTF, preform costs, waste production, machining durations, and associated expenditures, while notably reducing lead times from months to mere hours. The novelty in this study lies in the application of Wire Arc Additive Manufacturing (WAAM) technology for the fabrication of titanium aircraft components. This approach includes a unique height compensation strategy and the implementation of various deposition strategies, such as single-seam, overlapping, and oscillating.Publication Open Access Pugh's total design: the design of an electromagnetic servo brake with ABS function - a case study(SAGE, 2016) Villanueva Roldán, Pedro; Lostado Lorza, Rubén; Corral Bobadilla, Marina; Ingeniería; IngeniaritzaPublication Open Access Residual stresses with time-independent cyclic plasticity in finite element analysis of welded joints(MDPI, 2017) Lostado Lorza, Rubén; Corral Bobadilla, Marina; Martínez Calvo, María Ángeles; Villanueva Roldán, Pedro; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta ProiektuakDue to the intense concentration of heat in a reduced area when Gas Metal Arc Welding (GMAW) is used to join mechanical components, the regions near the weld bead are subjected to severe thermal cycles. Firstly, the region close to the weld bead that is heated tends to be in compression and, when it cools, tends to be in tension. According to Pilipenko, the material is exposed to elastic compression and, then, reaching the yield limit, undergoes plastic deformation with the appearance of residual stresses followed by elastic-plastic unloading. This could be considered as a strain-stress cycle. This paper applies plastic-strain-range memorization based on time-independent cyclic plasticity theory for butt joints with single V-groove Finite Element (FE) models that were manufactured by GMAW. The theory combines both the isotropic hardening and the nonlinear kinematic hardening rule (Chaboche model) to reproduce the behavior of cyclic plasticity and thus to obtain the residual stresses in welded joint FE models. As a practical example, the proposed theory is validated by three welded joint specimens that were manufactured with different input parameters of speed, voltage, and current. An agreement between the residual stresses obtained by the FE model proposed and those obtained experimentally by the hole drilling method at different depths demonstrates that the proposed theory could be valid for modelling the residual stresses in welded joints when cyclic plasticity is considered over the range of speed, voltage, and current studied.Publication Open Access Design of an electromagnetic servo brake with ABS function(Trans Tech Publications, 2015) Lostado Lorza, Rubén; Somovilla Gómez, Fatima; Corral Bobadilla, Marina; Villanueva Roldán, Pedro; Fernández Martínez, Roberto; Ingeniería; IngeniaritzaPublication Open Access The integration of mechanical energy absorbers into rollover protective structures to improve the safety of agricultural tractors in the event of rollover(MDPI, 2024) Alfaro López, José Ramón; Pérez Ezcurdia, Amaya; Latorre Biel, Juan Ignacio; Arana Navarro, Ignacio; Benito Amurrio, Marta; Villanueva Roldán, Pedro; Ingeniería; Ingeniaritza; Institute of Smart Cities - ISC; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa, PJUPNA1912The combination of safety belts and rollover protective structures (ROPSs) is key in improving the safety of agricultural tractors in the event of rollover. However, we also have the opportunity to enhance the security provided by each ROPS; one such example is the combination of this safety device with adequate mechanical energy absorbers (MEAs). Inexpensive disc-shaped MEAs can be included in the anchoring points of a ROPS onto the chassis of a tractor. Three configurations of ROPS combined with MEAs were tested during the application of loads that simulated the effects of side rollover in the vehicle. The tested configurations included a blank MEA as a reference case alongside a single MEA and a stack assembly containing both elements. The results of the tests show that both the deformation of the ROPS itself and the strain energy are larger in the case of blank MEAs; thus, there is also a risk that the clearance zone will be infringed upon and that the protective structure will collapse. We can conclude that the implementation of an appropriate MEA in ROPS reduces the deformation of the ROPS itself and its strain energy in cases of vehicle rollover; hence, the safety provided by such protection systems may be improved at a low cost.Publication Open Access Automatic trajectory determination in automated robotic welding considering weld joint symmetry(MDPI, 2023) Curiel Braco, David; Veiga Suárez, Fernando; Suárez, Alfredo; Villanueva Roldán, Pedro; Aldalur, Eider; Ingeniería; IngeniaritzaThe field of inspection for welded structures is currently in a state of rapid transformation driven by a convergence of global technological, regulatory, and economic factors. This evolution is propelled by several key drivers, including the introduction of novel materials and welding processes, continuous advancements in inspection technologies, innovative approaches to weld acceptance code philosophy and certification procedures, growing demands for cost-effectiveness and production quality, and the imperative to extend the lifespan of aging structures. Foremost among the challenges faced by producers today is the imperative to meet customer demands, which entails addressing both their explicit and implicit needs. Furthermore, the integration of emerging materials and technologies necessitates the exploration of fresh solutions. These solutions aim to enhance inspection process efficiency while providing precise quantitative insights into defect identification and location. To this end, our project proposes cutting-edge technologies, some of which have yet to gain approval within the sector. Noteworthy among these innovations is the integration of vision systems into welding robots, among other solutions. This paper introduces a groundbreaking algorithm for tool path selection, leveraging profile scanning and the concept of joint symmetry. The application of symmetry principles for trajectory determination represents a pioneering approach within this expansive field.
- «
- 1 (current)
- 2
- 3
- »