Open Access
Overcoming non-local effects and Brillouin threshold limitations in Brillouin optical time domain sensors
(IEEE, 2015) Ruiz Lombera, Rubén; Urricelqui Polvorinos, Javier; Sagüés García, Mikel; Mirapeix, Jesús; López Higuera, José Miguel; Loayssa Lara, Alayn; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
We demonstrate, for the first time to our knowledge, a Brillouin optical time domain analysis (BOTDA) sensor that is able to operate with a probe power larger than the Brillouin threshold of the deployed sensing fiber and that is free from detrimental non-local effects. The technique is based on a dual-probe-sideband setup in which an optical frequency modulation of the probe waves along the fiber is introduced. This makes the optical frequency of the Brillouin interactions induced by each probe wave on the pump to vary along the fiber so that two broadband Brillouin gain and loss spectra that perfectly compensate are created. As a consequence, the pulse spectral components remain undistorted avoiding non-local effects. Therefore, a very large probe power can be injected, which improves the signal-to-noise ratio in detection for long-range BOTDA. Moreover, the probe power can even exceed the Brillouin threshold limit due to their frequency modulation, which reduces the effective amplification of spontaneous Brillouin scattering in the fiber. Experiments demonstrate the technique in a 50-km sensing link in which 8 dBm of probe power is injected.
Open Access
Brillouin optical time-domain analysis sensor assisted by Brillouin distributed amplification of pump pulses
(Optical Society of America, 2015) Urricelqui Polvorinos, Javier; Sagüés García, Mikel; Loayssa Lara, Alayn; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
We demonstrate the extension of the measurement range of Brillouin optical time-domain analysis (BOTDA) sensors using a distributed Brillouin amplifier (DBA). The technique is based on injecting a DBA pump wave in the fiber to generate an additional Brillouin interaction that amplifies the BOTDA pump pulses and compensates optical fiber attenuation. This amplification does not introduce any significant noise to the BOTDA’s probe wave due to the inherent directionality of the Brillouin gain. Additionally, we deploy a differential pulse-width pair measurement method to avoid measurement errors due to the interplay between the self-phase modulation effect and the changes in the temporal shape of the pulses induced by the transient behavior of Brillouin gain. Experimental proof-of-concept results in a 50-km fiber link demonstrate full compensa- tion of the fiber’s attenuation with no penalty on the signal-to-noise ratio of the detected signal.
Open Access
Polarization diversity scheme for BOTDA sensors based on a double orthogonal pump interaction
(IEEE, 2015) Urricelqui Polvorinos, Javier; López Fernandino, Felipe; Sagüés García, Mikel; Loayssa Lara, Alayn; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
We introduce a Brillouin optical time domain analysis (BOTDA) sensor deploying a novel polarization diversity technique based on the use of two orthogonal pump pulses which simultaneously interact with a phase modulated probe wave. The orthogonallity of the two pump pulses guarantees that two complementary Brillouin interactions take place at each position of the fiber, so that polarization independent measurements are performed throughout the fiber even if no averaging is applied. This feature can be exploited in dynamic distributed BOTDA sensors to reduce the measurement time, as no extra averaging is required to compensate the polarization dependence of Brillouin interaction. Proof of concept experiments demonstrate the feasibility of the technique by employing a completely passive scheme to generate the orthogonal pump pulses. Furthermore, the technique is stable and easy to implement, making it a perfect candidate for practical sensor implementations.
Open Access
Mitigation of modulation instability in Brillouin distributed fiber sensors by using orthogonal polarization pulses
(SPIE, 2015) Urricelqui Polvorinos, Javier; Alem, Mehdi; Sagüés García, Mikel; Thévenaz, Luc; Loayssa Lara, Alayn; Soto, Marcelo A.; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
A technique based on the use of orthogonally-polarized pulses is proposed to mitigate the detrimental impact of modulation instability on Brillouin distributed fiber sensors. While the theoretical underpinnings of the method are described by introducing a detailed model for the vector modulation instability, the technique is experimentally validated in a 25-km sensing link. Numerical and experimental results demonstrate that the use of orthogonally-polarized pulses not only mitigates the impact of modulation instability, but also the four-wave mixing occurring in systems using pumps with parallel polarization; thus, providing an important sensing range enhancement with a reduced pump depletion.

Sagüés García, Mikel

Email Address

person.page.identifierURI

Birth Date

Job Title

Last Name

First Name

person.page.departamento

person.page.instituteName

ORCID

person.page.observainves

person.page.upna

Name

Filters

Author

Subject

Date

Has files

Item Type

Type

Settings

Sort By

Results per page

Search Results