Person: Teniente Vallinas, Jorge
Loading...
Email Address
person.page.identifierURI
Birth Date
Research Projects
Organizational Units
Job Title
Last Name
Teniente Vallinas
First Name
Jorge
person.page.departamento
Ingeniería Eléctrica, Electrónica y de Comunicación
person.page.instituteName
ISC. Institute of Smart Cities
ORCID
0000-0001-9643-5479
person.page.upna
2694
Name
35 results
Search Results
Now showing 1 - 10 of 35
Publication Open Access Ultra-wide band corrugated gaussian profiled horn antenna design(IEEE, 2001) Teniente Vallinas, Jorge; Gonzalo García, Ramón; Río Bocio, Carlos del; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaA corrugated horn antenna design with more than 40% bandwidth is proposed in this paper. The measured radiated field patterns have a good agreement with the simulated ones. This antenna can be used in applications that require extremely wide bandwidth with low sidelobes and low crosspolar levels, with not very strong return loss requirements.Publication Open Access Optimized feedhorn designs for compact antenna test range at Limoges University(IEEE, 2006) Teniente Vallinas, Jorge; Arnaud, Eric; Gonzalo García, Ramón; Río Bocio, Carlos del; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaIn this paper, high technology optimized feedhorn designs are presented. These feedhorns have been designed to improve the quite zone size and behaviour at the Compact Antenna Test Range (CATR) of the Antenna Research Team (OSA) from Limoges University XLIM laboratory. Very nice results are obtained maintaining the quite zone at its maximum size over the whole frequency range. The designed feedhorns present low crosspolar levels, high phase centre stability and they are very simple and small, resulting in a very low manufacturing cost.Publication Open Access A complete optimization-loop, including feeders, of antenna systems based on reflectors(IEEE, 2005) Delgado, D.; Teniente Vallinas, Jorge; Río Bocio, Carlos del; Haro, L. de; Martínez, J. A.; Pino, A.G; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaIn the design process of a complete antenna system based on reflectors, the feed real performance is usually included once the reflectors have been optimized with an ideal feed. In this paper, the proposal is to include the feed inside the optimization loop of the whole system, by means of a parametric definition of the feeder. To perform the optimization, the parametric feed will be considered as an additional surface, which receives some desired electric field that should be analyzed to properly modify the feed definition parameters in order to reduce the difference between the desired and the new generated field distribution over a planar surface nearby the focal point of the system. At the end of the optimization process, all the elements of the whole antenna system, reflectors and feed, will be totally defined and perfectly coupled.Publication Open Access On the determination of the phase center of gaussian horn antennas(1998) Río Bocio, Carlos del; Teniente Vallinas, Jorge; Gonzalo García, Ramón; Sorolla Ayza, Mario; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaGaussian horn antenna designs have experimentally demonstrated excellent performance to produce a very pure Gaussian beam mode with extremely low sidelobes and crosspolarization levels. These results make very attractive these antennas for high performance applications as satellite communications, radar and remote sensing. The particular position of the phase center inside the horn antenna is crucial in the subsequent process to design the mirror system to be illuminated by the antenna. The Gaussian horn antennas, because the feature to excite a Gaussian beam modes, have the phase center close to the horn throat instead of the output horn aperture as usual. This feature is particular of Gaussian horn antennas, and it supposes a change in the design process using these antennas. The mathematical determination, by correlation of the output fields with Gaussian structures, and the numerical demonstration, will be showed in this paper. Also, some considerations of the advantages or disadvantages of this property will be commented.Publication Open Access Ultra-wide band corrugated profiled horn antenna design(IEEE, 2002) Teniente Vallinas, Jorge; Gonzalo García, Ramón; Río Bocio, Carlos del; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaNowadays, an increasing number of applications need stable radiation patterns with low sidelobes and low crosspolar levels in a very wide bandwidth. Gaussian Profiled Horn Antennas (GPHA’s) have demonstrated its feasibility as one of the best solutions. A corrugated gaussian horn antenna design with more than 40% bandwidth is proposed in this letter. The measured radiated far field patterns have a good agreement with the simulated ones. The measured results show a gaussian antenna with extremely wide bandwidth low sidelobes and low crosspolar levels.Publication Open Access New approach to the design of corrugated horn antennas(1997) Gonzalo García, Ramón; Teniente Vallinas, Jorge; Río Bocio, Carlos del; Sorolla Ayza, Mario; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaIn this paper, we present two new corrugated horn antenna designs in circular waveguide. The first one is a converter horn antenna from monomode circular waveguide TE11 to corrugated waveguide HE11 mode in a very efficient way. The conversion efficiency varies between 98 % and 99%. The HE11 mode has highly desired radiation pattern characteristics for applications like satellite communications, radar, remote- sensing, etc, nevertheless, when the requirements are more stringent this mode is not good enough and we must look for other solution. This one corresponds to the fundamental gaussian beam, which has outstanding features, such as being a free space mode, having high matching efficiency with a reflector, no sidelobes, perfect symmetry, etc. The second horn antenna presented generates very efficient fundamental gaussian beams at the output (99%-99.9%). It is important to say that the input must look like a gaussian beam, an HE11 for instance, which presents a 98.4% of gaussian beam or similar. We also show a new design in which we are working now, consisting in the junction of the two aforementioned designs. They form an unique horn antenna that results in the TE11 mode, from the fundamental gaussian beam mode. These components have been analysed using the Mode Matching and the Generalised Scattering Matrix techniques and the Moment Method as well as the equations in [1] to get the far field radiation pattern. Our results have been checked against those obtained by other authors.Publication Open Access Transición coaxial a guía doble ridge cargada(2005) Cantora Álvarez, Pablo; Río Bocio, Carlos del; Teniente Vallinas, Jorge; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaIn this paper a new method to design a transition from coaxial waveguide to a loaded double ridge waveguide is proposed. This method allows the use of the large frequency bandwidth ridge waveguides present. In the example shown, a reflection coefficient smaller than -10dB is obtained in a fractional bandwidth of 250% (f1-8*f1). The similarities between the dominant TEM modes of microstrip waveguide and loaded double ridge waveguides are the basis of this design method. The complete transition is made up through an intermediate transition to microstrip waveguide. Excellent behaviour is obtained.Publication Open Access Diseño de una antena dual gaussiana de doble profundidad de corrugación(2003) Ortiz Pérez de Eulate, Noelia; Teniente Vallinas, Jorge; Gonzalo García, Ramón; Río Bocio, Carlos del; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaIn this paper a new design of a dual-band corrugated horn antenna is presented. The design is based on a gaussian profile to allow high pattern symmetry, low-crosspolar levels and low-side-lobes over a wide frequency range. To achieve a dual-band corrugated horn antenna, dual depth corrugations were used along the whole profile. The design presents a nice far field radiation pattern, which is compatible with the frequency reuse requirements in satellite communication antennas. The horn has been designed to operate in two frequency bands between X, Ku and K bands. Simulations and measurements show pretty good radiation patterns with return loss below –20dB and crosspolar-levels below –30dB in both frequency bands.Publication Open Access Alimentadores gaussianos en guía de onda rectangular(1999) Teniente Vallinas, Jorge; Gonzalo García, Ramón; Río Bocio, Carlos del; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaA new and efficient design of a rectangular corrugated waveguide mode converter, from TE10 mode in a smooth rectangular monomode waveguide to HE11 mode in a corrugated rectangular waveguide, is proposed. The main idea is the application of Gaussian design techniques, described in the given references, previously applied in circular waveguides. By using these techniques compact and very efficient components are obtained. The obtained far field pattern is rather good as illuminator of square or rectangular parabolic reflectors, with very low sidelobes and crosspolarisation levels, avoiding the use of a rectangular to circular waveguide converter.Publication Open Access Generación del modo HE11 a partir de una guía circular lisa monomodo(1996) Gonzalo García, Ramón; Río Bocio, Carlos del; Teniente Vallinas, Jorge; Sorolla Ayza, Mario; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaIn this paper, we present an original taper design to obtain the HE11 corrugated circular waveguide mode exciting with a pure TE11 monomode smooth circular waveguide mode. The proposed corrugated taper has a longitudinal section composed of two hyperbolic profiles in series, one concave and the other convex united at a point, such that the derivative is continuous. Superimposed there is an additional tapering of the corrugation depth that goes from l/2 at taper input to l/4 within the first hyperbola. This original synthesis procedure has been successfully tested by computational simulation. The calculation method has been validated by experimental results of other authors.