Person: Teniente Vallinas, Jorge
Loading...
Email Address
Birth Date
Research Projects
Organizational Units
Job Title
Last Name
Teniente Vallinas
First Name
Jorge
person.page.departamento
Ingeniería Eléctrica, Electrónica y de Comunicación
ORCID
0000-0001-9643-5479
person.page.upna
2694
Name
35 results
Search Results
Now showing 1 - 10 of 35
Publication Open Access Generación del modo HE11 a partir de una guía circular lisa monomodo(1996) Gonzalo García, Ramón; Río Bocio, Carlos del; Teniente Vallinas, Jorge; Sorolla Ayza, Mario; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaIn this paper, we present an original taper design to obtain the HE11 corrugated circular waveguide mode exciting with a pure TE11 monomode smooth circular waveguide mode. The proposed corrugated taper has a longitudinal section composed of two hyperbolic profiles in series, one concave and the other convex united at a point, such that the derivative is continuous. Superimposed there is an additional tapering of the corrugation depth that goes from l/2 at taper input to l/4 within the first hyperbola. This original synthesis procedure has been successfully tested by computational simulation. The calculation method has been validated by experimental results of other authors.Publication Open Access Nuevas técnicas para el diseño de antenas de bocina corrugadas(2004) Teniente Vallinas, Jorge; Gonzalo García, Ramón; Río Bocio, Carlos del; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaThe present paper deals with the design of modern corrugated horn antennas for extremely low sidelobe level with the use of the well known corrugated Gaussian Profiled Horn Antenna (corrugated GPHA’s) to improve the radiation pattern features and reduce the antenna size. Basic design rules will be given to start with an appropriate profile which can be quickly used as input profile for modern optimization codes to improve antenna characteristics, i.e. its size.Publication Open Access Alimentadores gaussianos en guía de onda rectangular(1999) Teniente Vallinas, Jorge; Gonzalo García, Ramón; Río Bocio, Carlos del; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaA new and efficient design of a rectangular corrugated waveguide mode converter, from TE10 mode in a smooth rectangular monomode waveguide to HE11 mode in a corrugated rectangular waveguide, is proposed. The main idea is the application of Gaussian design techniques, described in the given references, previously applied in circular waveguides. By using these techniques compact and very efficient components are obtained. The obtained far field pattern is rather good as illuminator of square or rectangular parabolic reflectors, with very low sidelobes and crosspolarisation levels, avoiding the use of a rectangular to circular waveguide converter.Publication Open Access Generation of the HE11 mode in rectangular waveguide using gaussian techniques(IEEE, 1999) Teniente Vallinas, Jorge; Gonzalo García, Ramón; Sorolla Ayza, Mario; Río Bocio, Carlos del; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaA new and efficient design of a rectangular corrugated waveguide mode converter, from TE10 mode in a smooth rectangular monomode waveguide to HE11 mode in a corrugated rectangular waveguide, is proposed. The main idea is the application of Gaussian design techniques, described in the given references, previously applied in circular waveguides. By using these techniques compact and very efficient components are obtained. The obtained far field pattern is rather good as illuminator of square or rectangular parabolic reflectors, with very low sidelobes and crosspolarisation levels, avoiding the use of a rectangular to circular waveguide converter. Simulations by using the HP’s Finite Element code HFSS shown very promising results.Publication Open Access Comparación entre antenas cónicas corrugadas y antenas gaussianas corrugadas(2002) Teniente Vallinas, Jorge; Gonzalo García, Ramón; Río Bocio, Carlos del; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaIn this paper, a study of two equal size corrugated horn antennas; a conical and a gaussian profiled horn antenna (GPHA) has been developed. It will be demonstrated that GPHA´s provide lower sidelobes and wider bandwidths, while conical corrugated horn antennas offer higher directivities for the same aperture. Both type of antennas provide low crosspolar levels.Publication Open Access Diseño de una antena dual gaussiana de doble profundidad de corrugación(2003) Ortiz Pérez de Eulate, Noelia; Teniente Vallinas, Jorge; Gonzalo García, Ramón; Río Bocio, Carlos del; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaIn this paper a new design of a dual-band corrugated horn antenna is presented. The design is based on a gaussian profile to allow high pattern symmetry, low-crosspolar levels and low-side-lobes over a wide frequency range. To achieve a dual-band corrugated horn antenna, dual depth corrugations were used along the whole profile. The design presents a nice far field radiation pattern, which is compatible with the frequency reuse requirements in satellite communication antennas. The horn has been designed to operate in two frequency bands between X, Ku and K bands. Simulations and measurements show pretty good radiation patterns with return loss below –20dB and crosspolar-levels below –30dB in both frequency bands.Publication Open Access Design and characterization of terahertz CORPS beam forming networks(Springer, 2023) Biurrun Quel, Carlos; Haddad, Thomas; Sievert, Benedikt; Kress, Robin; Weimann, Nils; Erni, Daniel; Rennings, Andreas; Stöhr, Andreas; Teniente Vallinas, Jorge; Río Bocio, Carlos del; Ingeniería Eléctrica, Electrónica y de Comunicación; Institute of Smart Cities - ISC; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Universidad Pública de Navarra / Nafarroako Unibertsitate PublikoaThis work reviews the design and applicability of beam-forming networks based on Coherently Radiating Periodic Structures (CORPS-BFN) at Terahertz (THz) frequency bands. These versatile networks offer two operation modes: a continuous beam steering – feeding an antenna array with a linearly progressive phase distribution – using a reduced number of phase controls; or a multi-beam operation, generating independent, overlapped beams. These networks are built upon the concatenation of power combiners/dividers (PCDs) with isolated outputs. The isolation is provided by monolithically integrated resistors, implemented with Ti/TiO thin films for the first time. In this work, a planar prototype of a (inputs/outputs) microstrip CORPS-BFN for operation in the WR3.4/WM-864 band (220–330 GHz) on a thin 50 m Indium Phosphide (InP) substrate is designed, fabricated, and characterized. The measured S-parameters show a reflection coefficient better than -15 dB and an insertion loss between 1.6 and 3.2 dB in the whole band. In addition, an isolation better than 20 dB between the input ports has been measured. An overall remarkable agreement is observed between the measurements and the simulations. Last, the applications, scalability and efficiency of this type of networks at the targeted band are discussed in detail.Publication Open Access Transición coaxial a guía doble ridge cargada(2005) Cantora Álvarez, Pablo; Río Bocio, Carlos del; Teniente Vallinas, Jorge; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaIn this paper a new method to design a transition from coaxial waveguide to a loaded double ridge waveguide is proposed. This method allows the use of the large frequency bandwidth ridge waveguides present. In the example shown, a reflection coefficient smaller than -10dB is obtained in a fractional bandwidth of 250% (f1-8*f1). The similarities between the dominant TEM modes of microstrip waveguide and loaded double ridge waveguides are the basis of this design method. The complete transition is made up through an intermediate transition to microstrip waveguide. Excellent behaviour is obtained.Publication Open Access New approach to the design of corrugated horn antennas(1997) Gonzalo García, Ramón; Teniente Vallinas, Jorge; Río Bocio, Carlos del; Sorolla Ayza, Mario; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaIn this paper, we present two new corrugated horn antenna designs in circular waveguide. The first one is a converter horn antenna from monomode circular waveguide TE11 to corrugated waveguide HE11 mode in a very efficient way. The conversion efficiency varies between 98 % and 99%. The HE11 mode has highly desired radiation pattern characteristics for applications like satellite communications, radar, remote- sensing, etc, nevertheless, when the requirements are more stringent this mode is not good enough and we must look for other solution. This one corresponds to the fundamental gaussian beam, which has outstanding features, such as being a free space mode, having high matching efficiency with a reflector, no sidelobes, perfect symmetry, etc. The second horn antenna presented generates very efficient fundamental gaussian beams at the output (99%-99.9%). It is important to say that the input must look like a gaussian beam, an HE11 for instance, which presents a 98.4% of gaussian beam or similar. We also show a new design in which we are working now, consisting in the junction of the two aforementioned designs. They form an unique horn antenna that results in the TE11 mode, from the fundamental gaussian beam mode. These components have been analysed using the Mode Matching and the Generalised Scattering Matrix techniques and the Moment Method as well as the equations in [1] to get the far field radiation pattern. Our results have been checked against those obtained by other authors.Publication Open Access Suberb gaussian beam efficiency corrugated horn antennas(2010) Teniente Vallinas, Jorge; Gonzalo García, Ramón; Río Bocio, Carlos del; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaIn this paper we are presenting the possibilities of corrugated horn antennas that combine horizontal and vertical corrugations.