Person:
Teniente Vallinas, Jorge

Last Name

Teniente Vallinas

First Name

Jorge

person.page.departamento

Ingeniería Eléctrica, Electrónica y de Comunicación

ORCID

0000-0001-9643-5479

person.page.upna

2694

Full item page

Search Results

Now showing 1 - 10 of 54

Open Access
Generación del modo HE11 a partir de una guía circular lisa monomodo
(1996) Gonzalo García, Ramón; Río Bocio, Carlos del; Teniente Vallinas, Jorge; Sorolla Ayza, Mario; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
In this paper, we present an original taper design to obtain the HE11 corrugated circular waveguide mode exciting with a pure TE11 monomode smooth circular waveguide mode. The proposed corrugated taper has a longitudinal section composed of two hyperbolic profiles in series, one concave and the other convex united at a point, such that the derivative is continuous. Superimposed there is an additional tapering of the corrugation depth that goes from l/2 at taper input to l/4 within the first hyperbola. This original synthesis procedure has been successfully tested by computational simulation. The calculation method has been validated by experimental results of other authors.
Open Access
Nuevas técnicas para el diseño de antenas de bocina corrugadas
(2004) Teniente Vallinas, Jorge; Gonzalo García, Ramón; Río Bocio, Carlos del; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
The present paper deals with the design of modern corrugated horn antennas for extremely low sidelobe level with the use of the well known corrugated Gaussian Profiled Horn Antenna (corrugated GPHA’s) to improve the radiation pattern features and reduce the antenna size. Basic design rules will be given to start with an appropriate profile which can be quickly used as input profile for modern optimization codes to improve antenna characteristics, i.e. its size.
Open Access
Alimentadores gaussianos en guía de onda rectangular
(1999) Teniente Vallinas, Jorge; Gonzalo García, Ramón; Río Bocio, Carlos del; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
A new and efficient design of a rectangular corrugated waveguide mode converter, from TE10 mode in a smooth rectangular monomode waveguide to HE11 mode in a corrugated rectangular waveguide, is proposed. The main idea is the application of Gaussian design techniques, described in the given references, previously applied in circular waveguides. By using these techniques compact and very efficient components are obtained. The obtained far field pattern is rather good as illuminator of square or rectangular parabolic reflectors, with very low sidelobes and crosspolarisation levels, avoiding the use of a rectangular to circular waveguide converter.
Open Access
Experimental demonstration of a millimeter-wave metallic ENZ lens based on the energy squeezing principle
(IEEE, 2015) Torres Landívar, Víctor; Orazbayev, Bakhtiyar; Pacheco-Peña, Víctor; Teniente Vallinas, Jorge; Beruete Díaz, Miguel; Navarro Cía, Miguel; Sorolla Ayza, Mario; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
The performance of an epsilon-near zero (ENZ) plano-concave lens is experimentally demonstrated and verified at the D-band of the millimeter-waves. The lens is comprised of an array of narrow metallic waveguides near cut-off frequency, which effectively behaves as an epsilon-near-zero medium at 144 GHz. A good matching with free space is achieved by exploiting the phenomenon of energy squeezing and a clear focus with a transmission enhancement of 15.9 dB is measured. The lens shows good radiation properties with a directivity of 17.6 dBi and low cross-polar components of -34 dB. All results are supported by numerical simulations.
Open Access
Generation of the HE11 mode in rectangular waveguide using gaussian techniques
(IEEE, 1999) Teniente Vallinas, Jorge; Gonzalo García, Ramón; Sorolla Ayza, Mario; Río Bocio, Carlos del; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
A new and efficient design of a rectangular corrugated waveguide mode converter, from TE10 mode in a smooth rectangular monomode waveguide to HE11 mode in a corrugated rectangular waveguide, is proposed. The main idea is the application of Gaussian design techniques, described in the given references, previously applied in circular waveguides. By using these techniques compact and very efficient components are obtained. The obtained far field pattern is rather good as illuminator of square or rectangular parabolic reflectors, with very low sidelobes and crosspolarisation levels, avoiding the use of a rectangular to circular waveguide converter. Simulations by using the HP’s Finite Element code HFSS shown very promising results.
Open Access
Comparación entre antenas cónicas corrugadas y antenas gaussianas corrugadas
(2002) Teniente Vallinas, Jorge; Gonzalo García, Ramón; Río Bocio, Carlos del; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
In this paper, a study of two equal size corrugated horn antennas; a conical and a gaussian profiled horn antenna (GPHA) has been developed. It will be demonstrated that GPHA´s provide lower sidelobes and wider bandwidths, while conical corrugated horn antennas offer higher directivities for the same aperture. Both type of antennas provide low crosspolar levels.
Open Access
Diseño de una antena dual gaussiana de doble profundidad de corrugación
(2003) Ortiz Pérez de Eulate, Noelia; Teniente Vallinas, Jorge; Gonzalo García, Ramón; Río Bocio, Carlos del; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
In this paper a new design of a dual-band corrugated horn antenna is presented. The design is based on a gaussian profile to allow high pattern symmetry, low-crosspolar levels and low-side-lobes over a wide frequency range. To achieve a dual-band corrugated horn antenna, dual depth corrugations were used along the whole profile. The design presents a nice far field radiation pattern, which is compatible with the frequency reuse requirements in satellite communication antennas. The horn has been designed to operate in two frequency bands between X, Ku and K bands. Simulations and measurements show pretty good radiation patterns with return loss below –20dB and crosspolar-levels below –30dB in both frequency bands.
Open Access
Silicon integrated subharmonic mixer on a photonic-crystal platform
(IEEE, 2021) Torres García, Alicia E.; Pérez Escudero, José Manuel; Teniente Vallinas, Jorge; Gonzalo García, Ramón; Ederra Urzainqui, Íñigo; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Institute of Smart Cities - ISC; Ingeniería Eléctrica, Electrónica y de Comunicación
This paper presents a planar silicon integrated subharmonic mixer on top of a photonic-crystal platform. The local oscillator (LO) power is injected through a 2D photoniccrystal (PC) slab to a resonant cavity that effectively couples the signal to a planar bow-tie antenna. The same antenna, which is printed on the top of the PC cavity, contains an antiparallel Schottky diode pair which performs the down-conversion. The proposed design is a simple, easy to integrate, low cost, low profile device. Moreover, the described fabrication process is compatible with active components integration. The performance of the design has been experimentally demonstrated showing good agreement with the simulation and is comparable with the stateof-the-art of planar mixers. The work presented here is based on concepts and technologies from electronics and photonics domains and may be a good starting point for the creation of new devices, allowing the integration and upgrading of existing techniques from both worlds.
Open Access
Design and characterization of terahertz CORPS beam forming networks
(Springer, 2023) Biurrun Quel, Carlos; Haddad, Thomas; Sievert, Benedikt; Kress, Robin; Weimann, Nils; Erni, Daniel; Rennings, Andreas; Stöhr, Andreas; Teniente Vallinas, Jorge; Río Bocio, Carlos del; Ingeniería Eléctrica, Electrónica y de Comunicación; Institute of Smart Cities - ISC; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
This work reviews the design and applicability of beam-forming networks based on Coherently Radiating Periodic Structures (CORPS-BFN) at Terahertz (THz) frequency bands. These versatile networks offer two operation modes: a continuous beam steering – feeding an antenna array with a linearly progressive phase distribution – using a reduced number of phase controls; or a multi-beam operation, generating independent, overlapped beams. These networks are built upon the concatenation of power combiners/dividers (PCDs) with isolated outputs. The isolation is provided by monolithically integrated resistors, implemented with Ti/TiO thin films for the first time. In this work, a planar prototype of a (inputs/outputs) microstrip CORPS-BFN for operation in the WR3.4/WM-864 band (220–330 GHz) on a thin 50 m Indium Phosphide (InP) substrate is designed, fabricated, and characterized. The measured S-parameters show a reflection coefficient better than -15 dB and an insertion loss between 1.6 and 3.2 dB in the whole band. In addition, an isolation better than 20 dB between the input ports has been measured. An overall remarkable agreement is observed between the measurements and the simulations. Last, the applications, scalability and efficiency of this type of networks at the targeted band are discussed in detail.
Open Access
The Canfranc Axion Detection Experiment (CADEx): search for axions at 90 GHz with Kinetic Inductance Detectors
(IOP Publishing, 2022) Aja, Beatriz; Arguedas Cuendis, Sergio; Arregui Padilla, Iván; Artal, Eduardo; Barreiro, R. Belén; Casas, Francisco J.; Ory, Marina C. de; Díaz-Morcillo, Alejandro; Fuente, Luisa de la; Gallego, Juan Daniel; García-Barceló, José María; Gimeno, Benito; Gómez, Alicia; Granados, Daniel; Kavanagh, Bradley J.; Gómez Laso, Miguel Ángel; Lopetegui Beregaña, José María; Lozano-Guerrero, Antonio José; Magaz, María T.; Martín-Pintado, Jesús; Martínez-González, Enrique; Miralda-Escudé, Jordi; Monzó-Cabrera, Juan; Najarro de la Parra, Francisco; Navarro-Madrid, José R.; Nuñez Chico, Ana B.; Pascual, Juan Pablo; Pelegrin, Jorge; Peña Garay, Carlos; Rodríguez, David; Socuéllamos, Juan M.; Teberio Berdún, Fernando; Teniente Vallinas, Jorge; Vielva, Patricio; Vila, Iván; Vilar, Rocío; Villa, Enrique; Ingeniería Eléctrica, Electrónica y de Comunicación; Institute of Smart Cities - ISC; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren
We propose a novel experiment, the Canfranc Axion Detection Experiment (CADEx), to probe dark matter axions with masses in the range 330–460 μeV, within the W-band (80–110 GHz), an unexplored parameter space in the well-motivated dark matter window of Quantum ChromoDynamics (QCD) axions. The experimental design consists of a microwave resonant cavity haloscope in a high static magnetic field coupled to a highly sensitive detecting system based on Kinetic Inductance Detectors via optimized quasi-optics (horns and mirrors). The experiment is in preparation and will be installed in the dilution refrigerator of the Canfranc Underground Laboratory. Sensitivity forecasts for axion detection with CADEx, together with the potential of the experiment to search for dark photons, are presented.