Open Access
Terajets produced by dielectric cuboids
(AIP Publishing, 2014) Pacheco-Peña, Víctor; Beruete Díaz, Miguel; Minin, Igor V.; Minin, Oleg V.; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
The capability of generating terajets using three-dimensional (3D) dielectric cuboids working at terahertz (THZ) frequencies (as analogues of nanojets in the infrared band) is introduced and studied numerically. The focusing performance of the terajets is evaluated in terms of the transversal full width at half maximum (FWHM) along x- and y-directions using different refractive indices for a 3D dielectric cuboid with a fixed geometry, obtaining a quasi-symmetric terajet with a subwavelength resolution of 0.46 wavelengths when the refractive index is n=1.41. Moreover, the backscattering enhancement produced when metal particles are introduced in the terajet region is demonstrated for a 3D dielectric cuboid and compared with its two-dimensional (2D) counterpart. The results of the jet generated for the 3D case are experimentally validated at sub-THZ waves, demonstrating the ability to produce terajets using 3D cuboids.
Open Access
Super-oscillatory metalens at terahertz for enhanced focusing with reduced side lobes
(MDPI, 2018) Legaria Lerga, Santiago; Pacheco-Peña, Víctor; Beruete Díaz, Miguel; Institute of Smart Cities - ISC
In this paper, we design and numerically demonstrate an ultra-thin super-oscillatory metalens with a resolution below the diffraction limit. The zones of the lens are implemented using metasurface concepts with hexagonal unit cells. This way, the transparency and, hence, efficiency is optimized, compared to the conventional transparent–opaque zoning approach that introduces, inevitably, a high reflection in the opaque regions. Furthermore, a novel two-step optimization technique, based on evolutionary algorithms, is developed to reduce the side lobes and boost the intensity at the focus. After the design process, we demonstrate that the metalens is able to generate a focal spot of 0.46λ0 (1.4 times below the resolution limit) at the design focal length of 10λ0 with reduced side lobes (the side lobe level being approximately −11 dB). The metalens is optimized at 0.327 THz, and has been validated with numerical simulations.
Open Access
Photonic nanojets with mesoscale high-index dielectric particles
(AIP Publishing, 2019) Pacheco-Peña, Víctor; Beruete Díaz, Miguel; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Institute of Smart Cities - ISC; Ingeniería Eléctrica, Electrónica y de Comunicación
In this work, we demonstrate the ability of high-index dielectric particles immersed in air to generate photonic nanojets with extreme resolution (∼0.06λ0). Both 2D (cylindrical) and 3D (spherical) particles are analyzed, and their profile is truncated using the Weierstrass formulation for solid immersion lenses to produce a photonic nanojet at the output surface under plane wave illumination. Their focusing capability is evaluated in terms of the spatial resolution achieving subwavelength values of ∼0.14λ0 and ∼0.06λ0 for a truncated cylinder and sphere, respectively. The capability of the truncated sphere to enhance the backscattering produced by two small metallic spherical scatterers placed near the photonic nanojet is evaluated by using a scanning-probe microscopy configuration. The imaging capabilities of this technique are also analyzed by moving the metallic spheres in the transversal plane where the photonic nanojet is produced. The results presented here improve greatly the typical resolution of photonic nanojets generated with dielectric particles with a small index contrast. In addition, the high-index material allows using mesoscale particles, leading to a more compact setup. These results may find applications in areas such as microscopy, imaging, and sensing devices where a subwavelength resolution below the diffraction limit is needed.
Open Access
All-dielectric periodic terajet waveguide using an array of coupled cuboids
(AIP Publishing, 2015) Minin, Igor V.; Minin, Oleg V.; Pacheco-Peña, Víctor; Beruete Díaz, Miguel; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
In this paper, the recently proposed technique to produce photonic jets (terajets at terahertz (THz) frequencies) using 3D dielectric cuboids is applied in the design of a mesoscale cuboid-chain wave- guide. The chains are basically designed with several dielectric cubes with side 1 wavelength placed periodically along the axial z-axis and separated by an air-gap. Based on this, a systematic study of the focusing properties and wave guiding of this chain is performed when the air-gap between the dielectric cubes is changed from 0.25 wavelengths to 3 wavelengths with the best performance achieved at 2.5 wavelengths.An analysis when losses are included in the cubes is also done, demonstrating a robust performance. Finally, the wave guiding is experimentally demonstrated at sub-THz frequencies with a good agreement with numerical results. The simulation results of focusing and transport properties are carried out using Finite Integration Technique. The results here presented may be scaled to any frequency ranges such as millimeter, sub-millimeter, and optical frequencies.
Open Access
Metamaterials and plasmonics applied to devices based on periodic structures at high frequencies: microwaves, terahertz and optical range
(2016) Pacheco-Peña, Víctor; Beruete Díaz, Miguel; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
Esta tesis muestra el trabajo de investigación desarollado bajo el programa de doctorado “tecnología de las comunicaciones” de la Universidad Pública de Navarra (UPNA), para el grado de Doctor (PhD) en Ingenieria de Telecomunicaciones. La guía, supervisión y dirección de esta tesis doctoral ha sido desarrollada por Dr. Miguel Beruete Díaz de la UPNA. Durante el programa de PhD, dos estancias internacionales han sido completadas por este estudiante doctoral en las siguientes instituciones: Universidad de Pennsylvania bajo la supervisión de Prof. Nader Engheta (3 meses) y Imperial College London bajo la guía de Dr. Miguel Navarro-Cía (2 meses). Los temas tratados en esta tesis son desarrollados en milimétricas, terahercios y frecuencias ópticas. Se usan principalmente metamateriales y estructuras periódicas en el diseño de diferentes dispositivos como lentes, direccionadores de haz, guías de onda, etc.
Open Access
Experimental demonstration of a millimeter-wave metallic ENZ lens based on the energy squeezing principle
(IEEE, 2015) Torres Landívar, Víctor; Orazbayev, Bakhtiyar; Pacheco-Peña, Víctor; Teniente Vallinas, Jorge; Beruete Díaz, Miguel; Navarro Cía, Miguel; Sorolla Ayza, Mario; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
The performance of an epsilon-near zero (ENZ) plano-concave lens is experimentally demonstrated and verified at the D-band of the millimeter-waves. The lens is comprised of an array of narrow metallic waveguides near cut-off frequency, which effectively behaves as an epsilon-near-zero medium at 144 GHz. A good matching with free space is achieved by exploiting the phenomenon of energy squeezing and a clear focus with a transmission enhancement of 15.9 dB is measured. The lens shows good radiation properties with a directivity of 17.6 dBi and low cross-polar components of -34 dB. All results are supported by numerical simulations.
Open Access
Exploiting the dispersion of the double-negative-index fishnet metamaterial to create a broadband low-profile metallic lens
(Optical Society of America, 2015) Orazbayev, Bakhtiyar; Pacheco-Peña, Víctor; Beruete Díaz, Miguel; Navarro Cía, Miguel; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
Metamaterial lenses with close values of permittivity and permeability usually display low reflection losses at the expense of narrow single frequency operation. Here, a broadband low-profile lens is designed by exploiting the dispersion of a fishnet metamaterial together with the zoning technique. The lens operates in a broadband regime from 54 GHz to 58 GHz, representing a fractional bandwidth ~7%, and outperforms Silicon lenses between 54 and 55.5 GHz. This broadband operation is demonstrated by a systematic analysis comprising Huygens-Fresnel analytical method, full-wave numerical simulations and experimental measurements at millimeter waves. For demonstrative purposes, a detailed study of the lens operation at two frequencies is done for the most important lens parameters (focal length, depth of focus, resolution, radiation diagram). Experimental results demonstrate diffraction-limited ~0.5λ transverse resolution, in agreement with analytical and numerical calculations. In a lens antenna configuration, a directivity as high as 16.6 dBi is achieved. The different focal lengths implemented into a single lens could be potentially used for realizing the front end of a non-mechanical zoom millimeter-wave imaging system.
Open Access
Experimental realization of an epsilon-near-zero graded-index metalens at terahertz frequencies
(American Physical Society, 2017) Pacheco-Peña, Víctor; Engheta, Nader; Kuznetsov, Sergei A.; Gentselev, Alexandr; Beruete Díaz, Miguel; Ingeniaritza Elektrikoa eta Elektronikoa; Institute of Smart Cities - ISC; Ingeniería Eléctrica y Electrónica
The terahertz band has been historically hindered by the lack of efficient generators and detectors, but a series of recent breakthroughs have helped to effectively close the “terahertz gap.” A rapid development of terahertz technology has been possible thanks to the translation of revolutionary concepts from other regions of the electromagnetic spectrum. Among them, metamaterials stand out for their unprecedented ability to control wave propagation and manipulate electromagnetic response of matter. They have become a workhorse in the development of terahertz devices such as lenses, polarizers, etc., with fascinating features. In particular, epsilon-near-zero (ENZ) metamaterials have attracted much attention in the past several years due to their unusual properties such as squeezing, tunneling, and supercoupling where a wave traveling inside an electrically small channel filled with an ENZ medium can be tunneled through it, reducing reflections and coupling most of its energy. Here, we design and experimentally demonstrate an ENZ graded-index (GRIN) metamaterial lens operating at terahertz with a power enhancement of 16.2 dB, using an array of narrow hollow rectangular waveguides working near their cutoff frequencies. This is a demonstration of an ENZ GRIN device at terahertz and can open the path towards other realizations of similar devices enabling full quasioptical processing of terahertz signals.
Open Access
Zoned fishnet lens antenna with reference phase for side lobe reduction
(IEEE, 2015) Pacheco-Peña, Víctor; Navarro Cía, Miguel; Orazbayev, Bakhtiyar; Minin, Igor V.; Minin, Oleg V.; Beruete Díaz, Miguel; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
Reduction of first side lobe level and nulls in artificial fishnet metalenses is accomplished here by applying the reference phase concept along with the zoning technique. Higher focusing efficiency is achieved for a specific reference phase when comparing numerically and experimentally four different designs. For such best design, an improvement of the first side lobe level (2.4 dB), first null (13 dB) and gain (1.77dB) is achieved experimentally compared to the design without reference phase.
Open Access
Steering surface plasmons with a graded index dielectric medium
(IOP Publishing, 2018) Beruete Díaz, Miguel; Pacheco-Peña, Víctor; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Institute of Smart Cities - ISC; Ingeniería Eléctrica, Electrónica y de Comunicación
The arbitrary control of surface plasmon (SP) propagation has become an intense research topic for several decades. This is due to the fact that they can be used in a variety of fields such as optical trapping, nanoantennas and medical applications. In this communication, the graded index technique is applied in the design of several steerers able to tailor the direction of propagation of the incident SPs by simply changing the height of a dielectric block on top of a semi?infinite metal slab. The design procedure is shown and the structures are numerically evaluated demonstrating a good agreement with the analytical calculations, with the SPs deflected at the design angles (θ ranging from 10° to 60°) with a wide bandwidth steering of 60 nm around the design value (633 nm)