Open Access
Recycled granulates manufacturing from spent refractory wastes and magnesium based binder
(Elsevier, 2023) Seco Meneses, Andrés; Del Castillo García, Jesús María; Perlot, Céline; Marcelino Sádaba, Sara; Espuelas Zuazu, Sandra; Ingeniería; Ingeniaritza; Institute of Smart Cities - ISC
This paper analyzes the ability of two Spent Refractory Wastes (SRW) for the manufacturing of recycled granulates for construction applications. A binary magnesium oxide and ground granulated blast furnace slag hydraulic binder was considered as an agglomerating agent for the granulates manufacturing. Influence of curing atmosphere was carried out: in air, 20 % CO2 and 100 % CO2 atmosphere up to 28 days. Granulometry, thermal analysis, particle density, bulk density, water absorption and mechanical strength tests were performed to characterize the granulates. SRW showed their ability for the granulates manufacturing. Results demonstrated the existence of a residual reactivity of the wastes considered. A direct relationship between the CO2 content of the curing atmosphere and the granulates hydration degree was observed. Carbonation process increased from 7 days to 28 days and direct relationships were observed between the CO2 content and the carbonation degree as well as between the binder dosage and the carbonation degree. CO2 curing reduced the water absorption and increased the compressive strength of the granulates.
Open Access
Magnesium oxide as alternative binder for unﬁred clay bricks manufacturing
(Elsevier, 2017) Espuelas Zuazu, Sandra; Omer, Joshua; Marcelino Sádaba, Sara; Echeverria Lazcano, Angel María; Seco Meneses, Andrés; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
Replacement of ﬁred bricks by unﬁred ones could be an eﬀective way to reduce the building industryenvironmental footprint: Their manufacture not only requires less energy and natural resources but alsogenerates less waste. Bricks are based on the use of an additive cementitious material in the form of a binder,usually lime or cement. Such additives have a great environmental impact owing to the high energy consumptionand CO2during in their manufacturing process. In this article experiments are carried out in order to investigatethe applicability of a MgO rich industry by-product as a binder for the production of unﬁred clay bricks. Fromthe experiments, the MgO was observed to show ability to enhance the mechanical properties of a clay brick inmuch the same way as lime does. Water absorption tests on bricks revealed the superiority of MgO over lime inenhancing the durability properties of unﬁred bricks. The laboratory results demonstrate the high potential ofMgO based additives as alternative binders to the calcium based ones. Consequently, this oﬀers opportunity forreducing the environmental impact associated with the use of ﬁred clay bricks. In addition, it could allow aneﬀective way for the valorization of MgO containing industry by-products that currently discarded to landﬁlls

Seco Meneses, Andrés

Email Address

person.page.identifierURI

Birth Date

Job Title

Last Name

First Name

person.page.departamento

person.page.instituteName

ORCID

person.page.observainves

person.page.upna

Name

Filters

Author

Subject

Date

Has files

Item Type

Type

Settings

Sort By

Results per page

Search Results