Open Access
Dynamic modeling of a pressurized alkaline water electrolyzer: a multiphysics approach
(IEEE, 2023) Iribarren Zabalegui, Álvaro; Elizondo Martínez, David; Barrios Rípodas, Ernesto; Ibaiondo, Harkaitz; Sánchez Ruiz, Alain; Arza, Joseba; Sanchis Gúrpide, Pablo; Ursúa Rubio, Alfredo; Ingeniería Eléctrica, Electrónica y de Comunicación; Institute of Smart Cities - ISC; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren
In this paper a dynamic model for the simulation of pressurized alkaline water electrolyzers is presented. The model has been developed following a multiphysics approach, integrating electrochemical, thermodynamic, heat transfer and gas evolution processes in order to faithfully reproduce the complete dynamical behavior of these systems. The model has been implemented on MATLAB/Simulink and validated through experimental data from a 1 Nm3/h commercial alkaline water electrolyzer. Validations have been performed under real scenarios where the electrolyzer is working with power profiles characteristic from renewable sources, wind and photovoltaic. The simulated results have been found to be consistent with the real measured values. This model has a great potential to predict the behavior of alkaline water electrolyzers coupled with renewable energy sources, making it a very useful tool for designing efficient green hydrogen production systems.
Open Access
Onset of irreversible reactions in overcharging lithium-ion cells: an experimental and modeling approach
(IEEE, 2023) Irujo Izcue, Elisa; Berrueta Irigoyen, Alberto; Lalinde Sainz, Iñaki; Arza, Joseba; Sanchis Gúrpide, Pablo; Ursúa Rubio, Alfredo; Ingeniería Eléctrica, Electrónica y de Comunicación; Institute of Smart Cities - ISC; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren
Lithium-ion batteries are energy storage systems used in an increasing number of applications. Due to their flammable materials, their use entails risks of fire and explosion. The study of the abuse operation of these batteries before reaching the thermal runaway is a relevant research topic to prevent safety issues. There are various studies in the bibliography providing exhaustive thermal studies of the safe operating area, as well as concerning the thermal runaway. However, the onset irreversible reactions, that take place at a SOC around 110%, have not been properly analyzed. We present in this contribution an experimental study of this onset reaction measured in pouch Li-ion cells under various conditions of charge current and temperature. We also propose a lumped-parameter thermal model for the cell, which allows a detailed characterization of this exothermic reaction. The results achieved in this contributions can be a key tool to prevent overcharge accidents that may arise due to malfunctioning of the battery charger or battery management system.
Open Access
Incremental capacity analysis of lithium-ion second-life batteries from electric vehicles under cycling ageing
(IEEE, 2021) Braco Sola, Elisa; San Martín Biurrun, Idoia; Sanchis Gúrpide, Pablo; Ursúa Rubio, Alfredo; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Institute of Smart Cities - ISC; Ingeniería Eléctrica, Electrónica y de Comunicación; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa; Gobierno de Navarra / Nafarroako Gobernua
Nowadays, the reuse of batteries from electric vehicles is considered a promising solution to benefit from their remaining energy and extend their lifespan. Yet, the economic viability of these second-life batteries is still uncertain, and the optimization of testing at their reconfiguration stage and during their lifetime is the key to ensure their success. This paper aims to assess Incremental Capacity Analysis technique in Nissan Leaf modules during their second-life use, in order to evaluate both its potential as an State of Health estimator and as a tool to identify underlying degradation mechanisms. Despite the different internal state and ageing rates observed between the tested modules, ICA is found to be consistent at similar SOH levels. The influence of ageing, current and temperature on ICA is evaluated through an accelerated cycling test. Results show that ICA is a promising alternative to estimate SOH during second life even at currents up to C/2 and testing temperatures of 45 °C. However, testing by accelerated currents and temperatures is not recommended for the identification of degradation mechanisms.
Open Access
Identification of critical parameters for the design of energy management algorithms for Li-ion batteries operating in PV power plants
(IEEE, 2020) Berrueta Irigoyen, Alberto; Soto Cabria, Adrián; Marcos Álvarez, Javier; Parra Laita, Íñigo de la; Sanchis Gúrpide, Pablo; Ursúa Rubio, Alfredo; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Institute of Smart Cities - ISC; Ingeniería Eléctrica, Electrónica y de Comunicación; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa, ReBMS PJUPNA1904; Gobierno de Navarra / Nafarroako Gobernua, 0011-1411-2018-000029 GERA
Lithium-ion batteries are gaining importance for a variety of applications due to their price decrease and characteristics improvement. For a proper use of such storage systems, an energy management algorithm (EMA) is required. A number of EMAs, with various characteristics, have been published recently, given the diverse nature of battery problems. The EMA of deterministic battery problems is usually based on an optimization algorithm. The selection of such an algorithm depends on a few problem characteristics, which need to be identified and closely analyzed. The aim of this article is to identify the critical optimization problem parameters that determine the most suitable EMA for a Li-ion battery. With this purpose, the starting point is a detailed model of a Li-ion battery. Three EMAs based on the algorithms used to face deterministic problems, namely dynamic, linear, and quadratic programming, are designed to optimize the energy dispatch of such a battery. Using real irradiation and power price data, the results of these EMAs are compared for various case studies. Given that none of the EMAs achieves the best results for all analyzed cases, the problem parameters that determine the most suitable algorithm are identified to be four, i.e., desired computation intensity, characteristics of the battery aging model, battery energy and power capabilities, and the number of optimization variables, which are determined by the number of energy storage systems, the length of the optimization problem, and the desired time step.
Open Access
Applied method to model the thermal runaway of lithium-ion batteries
(IEEE, 2021) Lalinde Sainz, Iñaki; Berrueta Irigoyen, Alberto; Sanchis Gúrpide, Pablo; Ursúa Rubio, Alfredo; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Institute of Smart Cities - ISC; Ingeniería Eléctrica, Electrónica y de Comunicación; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
The thermal runaway (TR) is one of the most dangerous phenomena related to lithium-ion batteries. For this reason, there are different proposals in the literature for its modelling. Most of these proposed models take into account the decomposition reactions between the internal components of the cell, and base the adjustment of the parameters on numerous abuse tests that lead to the appearance of TR. However, these tests are destructive, require specific equipment, present a high economic cost and are very time consuming. This paper proposes a modelling method which enables the development of TR models with the use of fewer resources. This method is based on chemical kinetics, which allow a simplification of the general modelling process published in the literature. At the same time it maintains good accuracy and makes it possible to define the TR behavior of any type of cell, regardless of its chemistry, shape or size. Furthermore, the proposed method allows the use of the experimental results most commonly presented in the specialized literature, which significantly reduces the need for destructive testing. The presented modelling method achieves a good compromise between accuracy and applicability in the validations shown in the paper.
Open Access
New design alternatives for a hybrid photovoltaic and doubly-fed induction wind plant to augment grid penetration of renewable energy
(IEEE, 2021) Goñi, Naiara; Sacristán Sillero, Javier; Berrueta Irigoyen, Alberto; Rodríguez Rabadan, José Luis; Ursúa Rubio, Alfredo; Sanchis Gúrpide, Pablo; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Institute of Smart Cities - ISC; Ingeniería Eléctrica, Electrónica y de Comunicación; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
Reducing carbon emissions is essential to stop climate change. The grid-share of renewable generation plants is increasing, being wind and photovoltaic plants the most common ones, whereas conventional plants are the only ones that provide the necessary services to maintain the grid stability and keep the generation-demand balance. However, with the aim of achieving carbon-neutral generation, conventional plants are being dismantled. This leads to the imminent need of providing these services with renewable plants. Due to this challenge, this proposal analyses a hybrid plant composed by wind and photovoltaic generation with two types of storage, lithium-ion batteries and a thermal storage system based on volcanic stones. In order to compare both strategies, a technoeconomic methodology is explained that allows to optimally size the plant, using the current prices of each technology. The most cost-competitive proposal turns to be the hybrid plant with thermal storage, composed by 623.9 MW installed power and 21.9 GWh of storage, which could replace a 100 MW, 24/7 conventional power plant, with an LCOHS (levelized cost of hybrid system) of 118.38 €/MWh, providing identical grid services and an equivalent inertia in a way committed with the environment. This is in turn a zero-carbon emissions solution perfectly matched to a second life plan for a conventional power plant.
Open Access
Health indicator selection for state of health estimation of second-life lithium-ion batteries under extended ageing
(Elsevier, 2022) Braco Sola, Elisa; San Martín Biurrun, Idoia; Sanchis Gúrpide, Pablo; Ursúa Rubio, Alfredo; Stroe, Daniel-Ioan; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Institute of Smart Cities - ISC; Ingeniería Eléctrica, Electrónica y de Comunicación; Gobierno de Navarra / Nafarroako Gobernua; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
Nowadays, the economic viability of second-life (SL) Li-ion batteries from electric vehicles is still uncertain. Degradation assessment optimization is key to reduce costs in SL market not only at the repurposing stage, but also during SL lifetime. As an indicator of the ageing condition of the batteries, state of health (SOH) is currently a major research topic, and its estimation has emerged as an alternative to traditional characterization tests. In an initial stage, all SOH estimation methods require the extraction of health indicators (HIs), which influence algorithm complexity and on-board implementation. Nevertheless, a literature gap has been identified in the assessment of HIs for reused Li-ion batteries. This contribution targets this issue by analysing 58 HIs obtained from incremental capacity analysis, partial charging, constant current and constant voltage stage, and internal resistance. Six Nissan Leaf SL modules were aged under extended cycling testing, covering a SOH range from 71.2 % to 24.4 %. Results show that the best HI at the repurposing stage was obtained through incremental capacity analysis, with 0.2 % of RMSE. During all SL use, partial charge is found to be the best method, with less than 2.0 % of RMSE. SOH is also estimated using the best HI and different algorithms. Linear regression is found to overcome more complex options with similar estimation accuracy and significantly lower computation times. Hence, the importance of analysing and selecting a good SL HI is highlighted, given that this made it possible to obtain accurate SOH estimation results with a simple algorithm.
Open Access
Analysis and modelling of calendar ageing in second-life lithium-ion batteries from electric vehicles
(IEEE, 2022) Braco Sola, Elisa; San Martín Biurrun, Idoia; Sanchis Gúrpide, Pablo; Ursúa Rubio, Alfredo; Ingeniería Eléctrica, Electrónica y de Comunicación; Institute of Smart Cities - ISC; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Gobierno de NAVARRA / Nafarroako Gobernua
The reuse of Li-ion batteries from electric vehicles is a promising alternative to recycling nowadays. However, the technical and economic viability of these second-life (SL) batteries is not yet clear. Degradation assessment plays a key role not only to analyse the impact of ageing factors in reused batteries, but also to quantify their durability. In this context, this contribution aims to analyse calendar ageing behaviour in SL cells. 16 reused Nissan Leaf modules are aged during 750 days under three temperatures and four State of Charge (SOC), covering a State of Health range from 72.2 % to 13 %. The impact of temperature and SOC as stress factors is firstly analysed, concluding that their increase accelerates ageing. Temperature rise is found to have a major impact, accelerating up to 27 times capacity fade and almost 6 times resistance increase when compared to light ageing conditions, while increasing SOC nearly doubles ageing rates. The worst ageing case is found to be the combination of 60 ◦C and 66 % of SOC. Regarding degradation trends, they are proven to be constant during all SL lifetime. This work also proposes and validates a calendar ageing model for SL cells. Accuracy of validation results show a fitting Rsq of 0.9941 in capacity fade and 0.9557 in resistance increase, thereby tracking the heterogeneous degradation of the SL cells under calendar ageing.
Open Access
Methodology for comparative assessment of battery technologies: experimental design, modeling, performance indicators and validation with four technologies
(Elsevier, 2025-01-15) Irujo Izcue, Elisa; Berrueta Irigoyen, Alberto; Sanchis Gúrpide, Pablo; Ursúa Rubio, Alfredo; Ingeniería Eléctrica, Electrónica y de Comunicación; Ingeniaritza Elektrikoa, Elektronikoa eta Telekomunikazio Ingeniaritza; Institute of Smart Cities - ISC; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa, PJUPNA2023-11380; Gobierno de Navarra / Nafarroako Gobernua
An increasing number of applications with diverse requirements incorporate various battery technologies. Selecting the most suitable battery technology becomes a tedious task as several aspects need to be taken into account. Two of the key aspects are the battery characteristics under temperature variations and their degradation. While numerous contributions using tailored assessment methods to evaluate both aspects for a particular application exist in the literature, a general methodology for analysis is necessary to enable a quantitative comparison between different technologies. We propose in this paper a novel methodology, based on performance indicators, to quantify the potential and limitations of a battery technology for diverse applications sharing a similar operational profile. A quantification of phenomena such as the influence of high and low temperatures on the battery, or the effect of cycling and state of charge on battery aging is obtained. In pursuit of these indicators, an experimental procedure and the fitting of aging model parameters that allow their calculation are proposed. As an additional outcome of this work, a general aging model that allows comprehensive analysis of aging behavior is developed and the trade-off between experimental time and accuracy is analyzed to find an optimal experimental time between 2 and 4 months, depending on the studied battery technology. Finally, the proposed methodology is applied to four battery technologies in order to show its potential in a real case-study.
Open Access
Lithium-ion second-life batteries: aging modeling and experimental validation
(IEEE, 2024-08-30) Pérez Ibarrola, Ane; San Martín Biurrun, Idoia; Sanchis Gúrpide, Pablo; Ursúa Rubio, Alfredo; Ingeniería Eléctrica, Electrónica y de Comunicación; Ingeniaritza Elektrikoa, Elektronikoa eta Telekomunikazio Ingeniaritza; Institute of Smart Cities - ISC; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa, PJUPNA2023-11380; Gobierno de Navarra / Nafarroako Gobernua
Re-utilizing lithium-ion batteries from electric vehicles reduces their environmental impact. To ensure their optimal sizing and safe use, identifying the current state of the battery and predicting its remaining useful life is essential. This work analyzes the degradation mechanisms involved and proposes an aging model that utilizes a semi-empirical approach to accurately reproduce the battery's state of health within a range of 75-45 %. Calendar aging includes dependencies on temperature and state of charge while cycling aging is modeled based on depth of discharge, medium SOC, temperature, and Crate. The model is validated against experimental data from 14 LMO/LNO cells previously used in actual Nissan Leaf vehicles and an RMSE bellow 2.5 % is achieved in every case.