Open Access
Calibrating lower-middle Miocene mammal faunas and unravelling climate change during the Miocene Climate Optimum: the Bardenas Reales de Navarra record (Ebro basin, NE Iberian Peninsula)
(Springer, 2024-10-22) Larrasoaña, Juan Cruz; Suárez-Hernando, Oier; Beamud, Elisabet; Garcés, Miguel; Pérez de Landazábal Berganzo, José Ignacio; Gómez Polo, Cristina; Ruiz-Sánchez, Francisco Javier; Mata, María Pilar; Murelaga, Xabier; Ciencias; Zientziak; Institute for Advanced Materials and Mathematics - INAMAT2
The chronology of lower Miocene Iberian small mammal faunas is still poorly constrained given the scarcity of well dated sedimentary successions including small mammal fossil localities. Such scarcity has prevented also an accurate understanding of the response of European terrestrial ecosystem to global changes across the Miocene climate optimum (MCO), one of the best analogues of present-day global warming. Here we present an updated fossil small mammal record of the Bardenas Reales de Navarra (western Ebro basin, Spain), where an expanded lower to middle Miocene continental succession is superbly exposed. Previous and new magnetostratigraphic results from this succession have enabled us to propose, along with additional magnetostratigraphically-dated Iberian faunas, a new chronology for local zones Y to D (Mammal Neogene zones MN2 to MN5). In addition to that, the studied small mammal faunas point to a gradual increase in temperature and humidity conditions in SW Europe between 20 and 15.5 Ma, which appears to be coupled with the progressive shift towards warmer regional (Atlantic) and global conditions across the MCO, thereby pointing to gradual changes in oceanic circulation as the main driver of this period of global warmth. The evolution of sedimentary facies appears to indicate a threshold response of the Ebro basin hydrological balance to the MCO, whereas pedogenic formation of magnetic minerals seems to be linked to periods of enhanced climate variability. These results highlight the need of combining different paleoenvironmental indicators in order to obtain a reliable view of the response of continental ecosystems to global warming.
Open Access
A comprehensive analysis of the absorption spectrum of conducting ferromagnetic wires
(IEEE, 2012) Liberal Olleta, Íñigo; Ederra Urzainqui, Íñigo; Gómez Polo, Cristina; Labrador Otamendi, Alberto; Pérez de Landazábal Berganzo, José Ignacio; Gonzalo García, Ramón; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa; Física; Fisika
A detailed analysis of the absorption spectrum of conductive ferromagnetic wires is presented. The absorption spectrum is computed from the solution to the scattering problem, and circuit models are formulated to clarify the interplay between losses, skin-effect and wire geometry. Both infinitely-long wires and the axial resonances introduced by finite-length wires are considered. The theoretical results are validated experimentally through measurements within a metallic rectangular waveguide.
Open Access
Martensitic transformation controlled by electromagnetic field: from experimental evidence to wireless actuator applications
(Elsevier, 2022) Garayo Urabayen, Eneko; La Roca, Paulo Matías; Gómez Polo, Cristina; Sánchez-Alarcos Gómez, Vicente; Recarte Callado, Vicente; Pérez de Landazábal Berganzo, José Ignacio; Zientziak; Institute for Advanced Materials and Mathematics - INAMAT2; Ciencias; Gobierno de Navarra / Nafarroako Gobernua
Mechanical actuators based on shape memory alloys (SMA) are becoming a key component in the development of novel soft robotic applications and surgically implantable devices. Their working principle relies in the temperature induced martensitic transformation (MT), which is responsible of the actuation mechanism. In this work, we found experimental evidence to show that the martensitic transformation can be controlled by electromagnetic field (EF) by a wireless process in ferromagnetic shape memory alloys. It is shown that the martensitic transformation can be driven by an external EF (frequency 45 kHz) while the specific absorption rate (SAR), which was determined through real-time dynamic magnetization measurements, allows the instantaneous monitoring of the transformation evolution. On the basis of the obtained results, we propose a strategy to achieve a battery-free wireless SMA actuator that can be remotely controlled. This concept can be applicable to other SMA material that exhibit a similar magneto-structural phase transition
Open Access
Magnetic transition in nanocrystalline soft magnetic alloys analyzed via ac inductive techniques
(American Physical Society, 2004) Gómez Polo, Cristina; Pérez de Landazábal Berganzo, José Ignacio; Recarte Callado, Vicente; Vázquez, M.; Hernando, A.; Física; Fisika; Gobierno de Navarra / Nafarroako Gobernua
The magnetic transition in a FeSiBCuNb nanocrystalline alloy, associated with the decoupling of ferromagnetic crystallites around the Curie point of the residual amorphous matrix, is analyzed in this work through the temperature dependence of the ac axial magnetic permeability and impedance of the samples. The temperature dependence of both complex magnitudes presents a maximum in the irreversible contribution at a certain transition temperature. While for low values of the exciting ac magnetic field the transition temperature lies below the Curie temperature of the amorphous phase, a shift above this Curie point is observed increasing the amplitude of the applied ac magnetic field. The detected field dependence is interpreted taking into account the ac nature of the inductive characterization techniques and the actual temperature dependence of the coercivity of the samples.
Open Access
Magnetically activated 3D printable polylactic acid/polycaprolactone/magnetite composites for magnetic induction heating generation
(Springer, 2023) Galarreta Rodríguez, Itziar; López Ortega, Alberto; Garayo Urabayen, Eneko; Beato López, Juan Jesús; La Roca, Paulo Matías; Sánchez-Alarcos Gómez, Vicente; Recarte Callado, Vicente; Gómez Polo, Cristina; Pérez de Landazábal Berganzo, José Ignacio; Ciencias; Zientziak; Institute for Advanced Materials and Mathematics - INAMAT2; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
Additive manufacturing technology has attracted the attention of industrial and technological sectors due to the versatility of the design and the easy manufacture of structural and functional elements based on composite materials. The embedding of magnetic nanoparticles in the polymeric matrix enables the development of an easy manufacturing process of low-cost magnetically active novel polymeric composites. In this work, we report a series of magnetic composites prepared by solution casting method combining 5 to 60 wt.% of 140 ± 50 nm commercial Fe3O4 nanoparticles, with a semi-crystalline, biocompatible, and biodegradable polymeric blend made of polylactic acid (PLA) and polycaprolactone (PCL). The composites were extruded, obtaining 1.5 ± 0.2 mm diameter continuous and flexible filaments for fused deposition modelling 3D printing. The chemical, magnetic, and calorimetric properties of the obtained filaments were investigated by differential scanning calorimetry, thermogravimetric analysis, magnetometry, and scanning electron microscopy. Furthermore, taking advantage of the magnetic character of the filaments, their capability to generate heat under the application of low-frequency alternating magnetic fields (magnetic induction heating) was analyzed. The obtained results expose the versatility of these easy manufacturing and low-cost filaments, where selecting a desired composition, the heating capacity can be properly adjusted for those applications where magnetic induction plays a key role (i.e., magnetic hyperthermia, drug release, heterogeneous catalysis, water electrolysis, gas capture, or materials synthesis).
Open Access
Theoretical modeling and experimental verification of the scattering from a ferromagnetic microwire
(IEEE, 2011) Liberal Olleta, Íñigo; Ederra Urzainqui, Íñigo; Gómez Polo, Cristina; Labrador Otamendi, Alberto; Pérez de Landazábal Berganzo, José Ignacio; Gonzalo García, Ramón; Física; Fisika; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
This contribution presents a theoretical modelling of the scattering of ferromagnetic microwires in free-space and inside a rectangular waveguide, providing both an analytical solution and a physical interpretation of the problem. Special attention is devoted to the impact of the microwire radius and its magnetic properties. Theoretical results have been experimentally verified measuring the reflection, absorption and transmission coefficients of a ferromagnetic microwire inside a rectangular waveguide.
Open Access
Fe3O4-SiO2 mesoporous core/shell nanoparticles for magnetic field-induced ibuprofen-controlled release
(American Chemical Society, 2022-12-23) García Rodríguez, Lucía; Garayo Urabayen, Eneko; López Ortega, Alberto; Galarreta Rodríguez, Itziar; Cervera Gabalda, Laura María; Cruz Quesada, Guillermo; Cornejo Ibergallartu, Alfonso; Garrido Segovia, Julián José; Gómez Polo, Cristina; Pérez de Landazábal Berganzo, José Ignacio; Ciencias; Zientziak; Institute for Advanced Materials and Mathematics - INAMAT2; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa, PJUPNA2020; Gobierno de Navarra / Nafarroako Gobernua
Hybrid magnetic nanoparticles made up of an iron oxide, Fe3O4, core and a mesoporous SiO2 shell with high magnetization and a large surface area were proposed as an efficient drug delivery platform. The core/shell structure was synthesized by two seed-mediated growth steps combining solvothermal and sol—gel approaches and using organic molecules as a porous scaffolding template. The system presents a mean particle diameter of 30(5) nm (9 nm magnetic core diameter and 10 nm silica shell thickness) with superparamagnetic behavior, saturation magnetization of 32 emu/g, and a significant AC magnetic-field-induced heating response (SAR = 63 W/gFe3O4, measured at an amplitude of 400 Oe and a frequency of 307 kHz). Using ibuprofen as a model drug, the specific surface area (231 m2/g) of the porous structure exhibits a high molecule loading capacity (10 wt %), and controlled drug release efficiency (67%) can be achieved using the external AC magnetic field for short time periods (5 min), showing faster and higher drug desorption compared to that of similar stimulus-responsive iron oxide-based nanocarriers. In addition, it is demonstrated that the magnetic field-induced drug release shows higher efficiency compared to that of the sustained release at fixed temperatures (47 and 53% for 37 and 42 °C, respectively), considering that the maximum temperature reached during the exposure to the magnetic field is well below (31 °C). Therefore, it can be hypothesized that short periods of exposure to the oscillating field induce much greater heating within the nanoparticles than in the external solution.
Open Access
Giant stress-impedance (GSI) sensor for diameter evaluation incylindrical elements
(Elsevier, 2018-01-01) Beato López, Juan Jesús; Vargas Silva, Gustavo Adolfo; Pérez de Landazábal Berganzo, José Ignacio; Gómez Polo, Cristina; Ingeniería; Ingeniaritza; Ciencias; Zientziak; Institute for Advanced Materials and Mathematics - INAMAT2; Gobierno de Navarra / Nafarroako Gobernua
In this work, a magnetoelastic sensor to detect the micrometer diameter variations of cylindrical elements is analyzed. A nearly zero magnetostrictive amorphous ribbon with nominal composition (Co₀.₉₃Fe₀․₀₇)₇₅Si₁₂․₅B₁₂․₅ was selected as sensor nucleus. The sensor, based on Giant Stress-Impedance (GSI), is attached (glued) along the external perimeter of the cylindrical element. Changes in the cylindrical diameter, DM, induce effective tensile stresses, S, on the ribbon, giving rise to sensitive changes in the high frequency impedance, Z. The sensor response is analyzed in terms of the relationship between the induced strains and the diameter variations, where the effect of geometrical factors (cylinder diameter and sample length) is taken into account. The results indicate that although the maximum GSI ratio depends on the pre-induced bending stresses associated to the cylindrical configuration, the sample length plays the dominant role in the sensor sensitivity. The proposed device enables to monitor the micrometric diameter variation in cylindrical elements, with a maximum strain gauge factor (GF≈-80) for low induced strains.
Open Access
Modulating photocatalytic activity of nitrogen doped TiO2 nanoparticles via magnetic field
(Elsevier, 2024-07-30) Gómez Polo, Cristina; Cervera Gabalda, Laura María; Garayo Urabayen, Eneko; Beato López, Juan Jesús; Pérez de Landazábal Berganzo, José Ignacio; Ciencias; Zientziak; Institute for Advanced Materials and Mathematics - INAMAT2; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
The effect of the magnetic field on the photocatalytic activity of TiO2-based nanoparticles is analyzed using a magnetically-assisted photoreactor with permanent magnets to generate a controlled uniform magnetic field, B (¿82 mT). Nitrogen doped TiO2 nanoparticles (sizes around 10 nm) were synthesized through a solvothermal method employing Ti(IV) butoxide and HNO3 (x = 0, 0.5, 1, 1.5 and 2 mL) as precursors and their structural, optical and magnetic properties were analyzed. Specifically, nitrogen doping is confirmed through Hard X-ray Photoelectron Spectroscopy (HAXPES) in those samples synthesized with low HNO3 concentrations (x = 0.5, 1). The correlation between spin polarization (magnetic susceptibility) and visible photocatalytic activity (methyl orange as a model organic pollutant) is particularly analyzed. Surprisingly, opposite effects of the magnetic field on the photocatalytic performance are found in the visible range (above 400 nm) or under UV-Vis irradiation (decrease and increase in the photocatalytic activity, respectively, under magnetic field). The Langmuir-Hinshelwood model allows us to conclude that the strong decrease in adsorption under the magnetic field (around 42 % for x = 0.5) masks the increase in the kinetic constant (close to 58 % for x = 0.5) related mainly to the effect of Lorentz forces on the reduction of the electron-hole recombination.
Open Access
Magnetic-field-assisted photocatalysis of N-TiO2 nanoparticles
(IEEE, 2023-09-04) Cervera Gabalda, Laura María; Garayo Urabayen, Eneko; Beato López, Juan Jesús; Pérez de Landazábal Berganzo, José Ignacio; Gómez Polo, Cristina; Ciencias; Zientziak; Institute for Advanced Materials and Mathematics - INAMAT2
Nitrogen doped TiO2 nanoparticles were synthesized through solvothermal method employing Ti (IV) butoxide and HNO3 as precursors. Structural and optical characterizations confirm their nanometer nature (sizes around 10 nm) and the band-gap energy values in the UV range (3.2 eV). Nitrogen doping enhances the occurrence of optical Urbach tails extending towards the visible region. Visible photocatalytic performance (degradation of methyl orange) is correlated with maximum values in the magnetic susceptibility linked to a magnetic polarization of the anatase structure via defects (oxygen vacancies). The application of magnetic field provides a positive effect (acceleration in reaction kinetics) within the UV-Vis range.