Open Access
Mode-displacement method for structural dynamic analysis of bio-inspired structures: a palm-tree stem subject to wind effects
(Taylor & Francis, 2022) Plaza Puértolas, Aitor; Vargas Silva, Gustavo Adolfo; Iriarte Goñi, Xabier; Ros Ganuza, Javier; Ingeniería; Ingeniaritza
Biological materials (orthotropic materials), like wood, can offer good mechanical properties with a minimum amount of material, making their internal structure the suitable one to be applied on bio-inspired structures. The knowledge of the exceptional structural performance of palm trees, and specially its response to different loading conditions, provides useful information when lightweight structures with high slenderness ratio are desired. Recent researches focused on the analysis of palm trees subject to static loading conditions, ignoring the fluctuating nature of the wind speed. The purpose of this study is to simulate in a computational efficient way the effect of dynamic loading conditions applied on palm trees. Using the mode displacement method, the number of degrees of freedom of a dynamic finite element analysis can be drastically reduced with a minimal loss of accuracy. It was applied to simulate the behavior of structures comprised of an orthotropic material subject to a stochastic dynamic load. The influence of the number of selected degrees of freedom has also been studied. In addition, an exponential integration method is proposed to perform the time integration procedure. The results obtained show that a properly reduced model suitably represents the full finite element model without any appreciable loss of accuracy; it is also shown that computational cost can be drastically reduced. This method could give an appropriate computational representation of the behavior of orthotropic structures, and it could be used for studying more complex bio-inspired structures.
Open Access
Determination of the symbolic base inertial parameters of planar mechanisms
(Elsevier, 2017) Iriarte Goñi, Xabier; Ros Ganuza, Javier; Mata, Vicente; Aginaga García, Jokin; Ingeniería Mecánica, Energética y de Materiales; Mekanika, Energetika eta Materialen Ingeniaritza
The inertial information of a planar mechanical system is characterised using 4 inertial parameters per solid. Due to the kinematic constraints, this parametrisation turns out be redundant. In order to reduce the computational cost of the model and make it possible to estimate its inertial parameters, the model is usually written in terms of a minimum set of inertial parameters called base inertial parameters. These parameters completely determine the dynamics of motion (kinetics) of a mechanism and, since their contributions are independent to each other, their actual values can be estimated experimentally. The base inertial parameters expressions can be written as a linear combination of the inertial parameters and determining their symbolic expressions provides a deeper insight into their physical meaning. This paper presents a new algorithm to determine the symbolic expressions of the base inertial parameters of planar mechanisms. The approach is based on a very well known numerical method to obtain the base inertial parameters and on the fact that these parameters belong to a class of functions that lets us search for symbolic expressions matching with them. Since the symbolic expressions are a function of the geometric constants of the system, the presented algorithm constitutes a very valuable tool in design optimisation and it is also very interesting in dynamic parameter estimation, model reduction and other fields.
Open Access
Inertia transfer concept based general method for the determination of the base inertial parameters
(Springer, 2015) Ros Ganuza, Javier; Plaza Puértolas, Aitor; Iriarte Goñi, Xabier; Aginaga García, Jokin; Ingeniería; Ingeniaritza; Institute of Smart Cities - ISC
This paper presents a new algorithm to obtain the symbolic expressions of any of the possible base inertial parameter sets of a multibody system. Based on the ¿inertia transfer concept¿, a procedure is proposed to write a system of equations from which the base parameters are obtained. This leads to an automatizable and general method to obtain these parameters symbolically. The method can also be used to determine base inertial parameters numerically, and it can be even more straightforward to implement and use than the standard numerical methods. An example is presented to illustrate in detail the application of the algorithm, and to compare its results with those of a standard numerical procedure. The symbolic base inertial parameters can be of interest in symbolic simplification of the dynamic equations for real-time applications, design optimization, dynamic parameter identification, model reduction, and in other fields.

Ros Ganuza, Javier

Email Address

person.page.identifierURI

Birth Date

Job Title

Last Name

First Name

person.page.departamento

person.page.instituteName

ORCID

person.page.observainves

person.page.upna

Name

Filters

Author

Subject

Date

Has files

Item Type

Type

Settings

Sort By

Results per page

Search Results