Person: Iriarte Galarregui, Juan Carlos
Loading...
Email Address
person.page.identifierURI
Birth Date
Research Projects
Organizational Units
Job Title
Last Name
Iriarte Galarregui
First Name
Juan Carlos
person.page.departamento
Ingeniería Eléctrica, Electrónica y de Comunicación
person.page.instituteName
ISC. Institute of Smart Cities
ORCID
0000-0002-2860-5138
person.page.upna
3696
Name
4 results
Search Results
Now showing 1 - 4 of 4
Publication Open Access Advanced feeds for mm-wave antenna systems(Springer, 2018) Teniente Vallinas, Jorge; Iriarte Galarregui, Juan Carlos; Ederra Urzainqui, Íñigo; Gonzalo García, Ramón; Ingeniería Eléctrica, Electrónica y de Comunicación; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio IngeniaritzarenMillimeter-wave antenna systems have traditionally required high performance feeds in order to fulfill its stringent requirements. Therefore, this goal has been achieved by corrugated horns. However, in the last years new applications mainly in the communication systems have driven the use of other types of antenna feed with slightly reduced performance but simpler manufacturing at mm-wave and submm-wave frequencies with improvements in cost reduction. These advanced profiles are usually based in smooth waveguide advanced profiles. Besides, the chapter describes different feed configurations based on metamaterial structures and several examples of metamaterial based or inspired antennas are considered. Then, this chapter covers the different alternatives currently used for mm-wave antenna feed: corrugated horns, spline horns, and metamaterial horns. At the end of each section, it includes some research successful results.Publication Embargo Experimental validation of a Ku-band dual circularly polarized metasurface antenna(IEEE, 2018) Tellechea Pereda, Amagoia; Caminita, Francesco; Martini, Enrica; Ederra Urzainqui, Íñigo; Teniente Vallinas, Jorge; Iriarte Galarregui, Juan Carlos; Gonzalo García, Ramón; Maci, Stefano; Ingeniaritza Elektrikoa eta Elektronikoa; Institute of Smart Cities - ISC; Ingeniería Eléctrica y ElectrónicaThe experimental validation of a Ku-band dual circularly polarized (CP) broadside-beam metasurface (MTS) antenna is presented. A radially modulated anisotropic single layer MTS has been synthesised employing sub-wavelength elliptical slotted metallic patches printed on top of a thin Arlon grounded substrate. In the structure, two decoupled phasematched transverse magnetic and transverse electric surface waves (SWs) are excited, which interact with the modulated surface leading to a CP broadside radiation. Two different orthomode transducers have been designed to excite the SWs with orthogonal polarization and equal amplitude. The first feeding system is composed of a metallic stepped septum inside an airfilled square waveguide. A conical section is included to match the output port of the square waveguide with the terminal, dielectric filled circular waveguide. The second feed is much more compact and efficient and it is composed of a circular waveguide completely filled by a dielectric. Depending on the input port excited on the feeds, two TE11 modes are excited with ±90° phase shift, which determine the right-hand or left-hand sense of the broadside beam generated by the MTS. Manufacturing details of the MTS and excitations are given and the measurements are compared with the simulation results. Finally, conclusions are drawn.Publication Open Access A metasurface-enhanced substrate-integrated waveguide antenna(Institute of Electrical and Electronics Engineers, 2024) Chocarro Álvarez, Javier; Pérez Escudero, José Manuel; Teniente Vallinas, Jorge; Iriarte Galarregui, Juan Carlos; Ederra Urzainqui, Íñigo; Ingeniería Eléctrica, Electrónica y de Comunicación; Ingeniaritza Elektrikoa, Elektronikoa eta Telekomunikazio Ingeniaritza; Institute of Smart Cities - ISC; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa.The design, manufacture and characterization of a slotted waveguide antenna using substrate-integrated waveguide (SIW) technology combined with a metasurface are described in this paper. The inclusion of the metasurface serves to augment the radiating aperture and narrows the E-plane cut of the antenna pattern, a characteristic that would otherwise be dictated by the slots. For demonstration, an 8-element slotted SIW (S-SIW) antenna array with a -20 dB sidelobe level Chebyshev distribution was designed and its performance was compared to that of a conventional slotted SIW array. Owing to the metasurface, the radiation pattern E-plane narrows and 3 dB gain improvement has been achieved, while keeping matching unaffected.Publication Open Access 3-D printed horn antennas and components performance for space and telecommunications(IEEE, 2018) Teniente Vallinas, Jorge; Iriarte Galarregui, Juan Carlos; Caballero Nagore, Rubén; Valcázar Berdofe, Daniel; Goñi, Mikel; Martínez, Aitor; Ingeniería Eléctrica, Electrónica y de Comunicación; Institute of Smart Cities - ISC; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio IngeniaritzarenIn this work, a study of the performance of several antennas and components, manufactured using an accurate stereolithography 3D printer and resin for maximum accuracy and detail, is carried out. Electroless plating of the components to cover the pieces with a thick copper layer to improve their mechanical resistance is undertaken. Several SatCom horn antennas and components are designed, manufactured, and tested. A detailed study of a spline horn antenna and a filter is covered. These results are compared to the metallic lathe manufactured versions. Conclusions are derived from these tests, which are useful to improve additive manufactured components in future versions.