Open Access
Silver nanoparticles loaded electrospun nanofibers for humidity optical fiber sensing
(2012) Urrutia Azcona, Aitor; Rivero Fuente, Pedro J.; Goicoechea Fernández, Javier; Rodríguez, Yoany; Arregui San Martín, Francisco Javier; Matías Maestro, Ignacio; Ingeniaritza Elektrikoa eta Elektronikoa; Institute of Smart Cities - ISC; Ingeniería Eléctrica y Electrónica
In this work, a new optical device based on silver loaded electrospun nanofibers (ENFs) for measuring Relative Humidity is proposed. Fiber mats composed of poly(acrylic acid) and β-cyclodextrin were deposited onto an optical fiber core by electrospinning. Afterwards the ENFs were submitted to a thermal curing. Then, the ENFs were loaded with Ag nanoparticles (Ag NPs) synthesized using a Ag+ loading step and a further reduction step with dimethylamine borane (DMAB). Several load/reduction cycles were performed. Ag NPs enhance significantly the optical response of the polymer-only fiber mats. The Ag NPs loaded ENF sensor was tested using controlled variations of Relative Humidity (RH). The results showed a very fast response of the absorbance spectra enabling high performance applications such as human breathing monitoring.
Open Access
Contribution to the development of functional nanostructured coatings based on silver nanoparticles
(2014) Rivero Fuente, Pedro J.; Goicoechea Fernández, Javier; Arregui San Martín, Francisco Javier; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa; Gobierno de Navarra / Nafarroako Gobernua; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
Esta tesis se centra en la síntesis de nanopartículas de plata (AgNPs) y su posterior incorporación en recubrimientos delgados usando dos métodos alternativos: el proceso de síntesis in situ (ISS) de AgNPs y la técnica de embebido capa a capa (LbL-E) de AgNPs. Un preciso control de varios parámetros tales como la forma, tamaño, estado de agregación o la distribución de las nanopartículas de plata en los recubrimientos tiene una gran influencia en la posición final de la longitud de onda de la resonancia localizada de plasmones superficiales (LSPR). Además, estas películas que incorporan nanopartículas de plata han sido estudiadas para dos aplicaciones diferentes. La primera aplicación es la fabricación de recubrimientos antibacterianos eficientes. La segunda aplicación es la fabricación de un nuevo tipo de sensores de fibra óptica basados en la incorporación de nanopartículas de plata en películas nanoestructuradas, que hace posible obtener y observar dos resonancias ópticas diferentes, (LSPR) y resonancias de modos con pérdidas (LMR), en un mismo dispositivo
Open Access
A novel camera phone-based platform for Sol-Gel-derived fluorescence pH sensing
(2013) Urrutia Azcona, Aitor; Wencel, D.; O’Driscoll, S.; O’Reilly, B.; Abel, T.; Somers, M.; Rivero Fuente, Pedro J.; Arregui San Martín, Francisco Javier; McDonagh, C.; Ingeniaritza Elektrikoa eta Elektronikoa; Institute of Smart Cities - ISC; Ingeniería Eléctrica y Electrónica; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
In this work a novel camera phone system for fluorescence-based sol-gel-derived pH sensing is presented. The sol-gel based pH material, a microfluidic chip and a camera phone have been combined to obtain a fluorescence-based sensing system for fast and easy pH measurements.
Open Access
Optical sensors based on lossy-mode resonances
(Elsevier Science, 2017) Matías Maestro, Ignacio; Ascorbe Muruzabal, Joaquín; Acha Morrás, Nerea de; López Torres, Diego; Zubiate Orzanco, Pablo; Sánchez Zábal, Pedro; Urrutia Azcona, Aitor; Socorro Leránoz, Abián Bentor; Rivero Fuente, Pedro J.; Hernáez Sáenz de Zaitigui, Miguel; Elosúa Aguado, César; Goicoechea Fernández, Javier; Bariáin Aisa, Cándido; Corres Sanz, Jesús María; Ruiz Zamarreño, Carlos; Arregui San Martín, Francisco Javier; Del Villar, Ignacio; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa; Institute of Smart Cities - ISC
Open Access
Optical fiber resonance-based pH sensors using gold nanoparticles into polymeric layer-by-layer coatings
(Springer-Verlag, 2016) Arregui San Martín, Francisco Javier; Matías Maestro, Ignacio; Socorro Leránoz, Abián Bentor; Hernáez Sáenz de Zaitigui, Miguel; Goicoechea Fernández, Javier; Rivero Fuente, Pedro J.; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa; Ingeniería Mecánica, Energética y de Materiales; Mekanika, Energetika eta Materialen Ingeniaritza
Open Access
Humidity sensor based on a long-period fiber grating coated with a hydrophobic thin film
(2010) Urrutia Azcona, Aitor; Rivero Fuente, Pedro J.; Goicoechea Fernández, Javier; Arregui San Martín, Francisco Javier; Matías Maestro, Ignacio; Ingeniaritza Elektrikoa eta Elektronikoa; Institute of Smart Cities - ISC; Ingeniería Eléctrica y Electrónica
In this work it is proposed a novel fiber optic humidity sensor based on a functionally coated long-period fiber grating (LPG). The coating is composed of tetraorthosilicate matrix functionalized with perfluorooctyltriethoxysilane and its fabrication was performed by the sol-gel technique using a dip coating process using the LPG as substrate. This technique allows to fabricate sensitive films in a fast and simple way compared to other overlay fabrication techniques. The fabricated sensor was tested in a programmable temperature and climatic chamber. Relative humidity (RH) was varied in range from 20%RH to 80%RH at room temperature. The results showed a smooth exponential-like wavelength shift of the LPG attenuation band.
Open Access
Optical sensor based on polymer electrospun nanofibers for sensing humidity
(2011) Urrutia Azcona, Aitor; Rivero Fuente, Pedro J.; Goicoechea Fernández, Javier; Arregui San Martín, Francisco Javier; Matías Maestro, Ignacio; Ingeniaritza Elektrikoa eta Elektronikoa; Institute of Smart Cities - ISC; Ingeniería Eléctrica y Electrónica
A novel humidity sensor based on polymer electrospun nanofibers coating onto an optical fiber is proposed in this work. The coating is composed of poly(acrylic acid), and its fabrication was performed by the electrospinning technique using an optical fiber core as substrate. This technique allows the fabrication of sensitive films with high surface area in a fast and simple way compared to other overlay fabrication techniques. The sensor was tested in a programmable temperature and humidity climatic chamber. Relative Humidity (RH) was varied in the range from 20%RH to 80%RH at room temperature. The results showed a monotonic variation of the absorbance spectra to RH changes, thus obtaining a successful humidity sensor.
Open Access
Optical fiber sensors based on gold nanorods embedded in polymeric thin films
(Elsevier, 2018) Urrutia Azcona, Aitor; Goicoechea Fernández, Javier; Rivero Fuente, Pedro J.; Pildain Lería, Ander; Arregui San Martín, Francisco Javier; Ingeniería Eléctrica, Electrónica y de Comunicación; Ingeniaritza Elektrikoa, Elektronikoa eta Telekomunikazio Ingeniaritza; Institute of Smart Cities - ISC; Ingeniería; Ingeniaritza; Institute for Advanced Materials and Mathematics - INAMAT2
In this work, we present a study about the generation and analysis of optical resonances caused by gold nanorods (GNRs) embedded in films. GNRs were embedded in polymeric thin films using the Layerby-Layer nanoassembly (LbL) deposition technique. Polymer/GNRs thin films of different thicknesses were deposited on the surface of cladding removed optical fibers for sensing. The spectral responses of the optical fiber sensors were monitored during the build-up of the thin films. The generation of two Localized Surface Plasmon Resonances (LSPRs) associated to the GNRs was observed in thinner coatings. These devices with around 12 polymer/GNRs bilayers were characterized as refractometers, providing an intensity-based sensitivity up to 75.69 dB/RIU. For thicker polymer/GNRs overlays, both LSPRs bands were also generated and, additionally, it was observed a new Lossy Mode Resonance (LMR) band due to modes coupled to the sensitive coating. The dependence of these three resonance bands with the surrounding refractive index was studied. Finally, these sensors were tested in a climatic chamber in the 20-90% relative humidity (RH) range and the LMR showed a good sensitivity to RH changes while the LSPR bands remained very stable in comparison. Results showed an excellent sensitivity of 11.2 nm/%RH for the LMR, confirming the potential of this type of optical fiber sensor based on the combination of LSPRs and LMRs bands.
Open Access
Layer-by-layer nano-assembly: a powerful tool for optical fiber sensing applications
(MDPI, 2019) Rivero Fuente, Pedro J.; Goicoechea Fernández, Javier; Arregui San Martín, Francisco Javier; Ingeniaritza; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Institute for Advanced Materials and Mathematics - INAMAT2; Institute of Smart Cities - ISC; Ingeniería; Ingeniería Eléctrica, Electrónica y de Comunicación
The ability to tune the composition of nanostructured thin films is a hot topic for the design of functional coatings with advanced properties for sensing applications. The control of the structure at the nanoscale level enables an improvement of intrinsic properties (optical, chemical or physical) in comparison with the traditional bulk materials. In this sense, among all the known nanofabrication techniques, the layer-by-layer (LbL) nano-assembly method is a flexible, easily-scalable and versatile approach which makes possible precise control of the coating thickness, composition and structure. The development of sensitive nanocoatings has shown an exceptional growth in optical fiber sensing applications due to their self-assembling ability with oppositely charged components in order to obtain a multilayer structure. This nanoassembly technique is a powerful tool for the incorporation of a wide variety of species (polyelectrolytes, metal/metal oxide nanoparticles, hybrid particles, luminescent materials, dyes or biomolecules) in the resultant multilayer structure for the design of high-performance optical fiber sensors. In this work we present a review of applications related to optical fiber sensors based on advanced LbL coatings in two related research areas of great interest for the scientific community, namely chemical sensing (pH, gases and volatile organic compounds detection) as well as biological/biochemical sensing (proteins, immunoglobulins, antibodies or DNA detection).
Open Access
Functionalized electrospun fibers for the design of novel hydrophobic and anticorrosive surfaces
(MDPI, 2018) Rivero Fuente, Pedro J.; Yurrita Silanes, David; Berlanga Labari, Carlos; Rodríguez Trías, Rafael; Ingeniaritza; Institute for Advanced Materials and Mathematics - INAMAT2; Ingeniería; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa, Navarre-PRO-UPNA18 (6107)
In this work, a novel coating was deposited on aluminum alloy samples by using a combination of electrospinning and chemical vapor deposition (CVD-silanization) techniques in order to create a functionalized film with an enhancement of both corrosion resistance and hydrophobicity. The electrospinning technique makes the fabrication of highly crosslinked electrospun fibers possible by the combination of both poly(acrylic acid) and beta-cyclodextrin, respectively, which can be easily functionalized in a further step by using the CVD-silanization process due to the evaporation of a hydrophobic molecule such as 1H,1H,2H,2H-Perflurodecyltriethoxysilane. In addition, the resultant electrospun fibers with a high degree of insolubility have been successfully fabricated and metal oxide nanoparticles (TiO(2)NPs) have been incorporated into the electrospun polymeric solution in order to improve the corrosion protection. The surface morphology has been determined by using light optical microscopy, atomic force microscopy, scanning electron microscopy, and water contact angle (WCA) measurements. The corrosion resistance has been evaluated by using both potentiodynamic polarization and pitting corrosion tests. Finally, the results related to WCA measurements after CVD-silanization corroborate that the surfaces have been successfully functionalized with a hydrophobic behavior in comparison with the electrospinning process, showing a considerable difference in the roughness.