Gil Bravo, Antonio
Loading...
Email Address
person.page.identifierURI
Birth Date
Job Title
Last Name
Gil Bravo
First Name
Antonio
person.page.departamento
Ciencias
person.page.instituteName
InaMat2. Instituto de Investigación en Materiales Avanzados y Matemáticas
ORCID
person.page.observainves
person.page.upna
Name
- Publications
- item.page.relationships.isAdvisorOfPublication
- item.page.relationships.isAdvisorTFEOfPublication
- item.page.relationships.isAuthorMDOfPublication
2 results
Search Results
Now showing 1 - 2 of 2
Publication Open Access Optimizing the removal of nitrate by adsorption onto activated carbon using response surface methodology based on the central composite design(Taylor & Francis, 2020) Taoufik, Nawal; Elmchaouri, Abdellah; Korili, Sophia A.; Gil Bravo, Antonio; Zientziak; Institute for Advanced Materials and Mathematics - INAMAT2; CienciasThis study sheds light on the adsorption process for the removal of nitrate ions from synthetic aqueous solutions. This contaminant pose a potential risk to the environment and can cause health effects including cancers and methemoglobinemia in infants. When the adsorption process is carried out, the effect by the several operating parameters such as initial nitrate concentration, pH, mass of activated carbon, and contact time becomes apparent. The essential process variables are optimized using response surface methodology (RSM) based on the central composite design (CCD) experiments. For this purpose 31 experimental results are required to determine the optimum conditions. The optimum conditions for the removal of nitrates is found to be: initial nitrate concentration = 15 mg/L; initial pH 4.0; mass of activated carbon = 25 mg, and contact time = 70 min. At these optimized conditions, the maximum removal of nitrates is found to be 96.59%.Publication Open Access Use of response surface methodology to optimize triclosan adsorption on alumina pillared clays in a fixed-bed column for applications in solid-phase extraction(Elsevier, 2023-04-01) Cardona Rodríguez, Yaneth; Korili, Sophia A.; Gil Bravo, Antonio; Institute for Advanced Materials and Mathematics - INAMAT2; Universidad Pública de Navarra / Nafarroako Unibertsitate PublikoaFixed-bed column studies are generally conducted to consider possible applications in water-purification processes. In this work, three synthetic alumina pillared interlayered clays (Al-PILC) were analyzed in fixed-bed column studies for use as sorbents for solid-phase extraction (SPE) for the first time. Adsorption processes were studied for triclosan (TCS), which is an emerging pollutant (EP) that has been shown to have several health effects. Breakthrough curves were investigated by varying process parameters such as bed height (0.25–0.75 cm), inlet TCS concentration (20–60 mg/cm3 ), and flow rate (0.5–3 cm3 /min). Bohart-Adams, Bed Depth Service Time (BDST), and Thomas models were satisfactory applied to the results obtained for fixed-bed columns. The adsorption of TCS was successfully optimized for use in SPE for the three adsorbents studied using response surface methodology with a Box–Behnken design (RSM-BBD). The models developed were adequate for the experimental data (95% significance level), with high regression parameters (98.9–99.1). The optimum values for TCS adsorption on the fixed-bed column were 378.04, 367.78, and 378.93 mg (amount of adsorbent packed into the column), 0.5 cm3 /min (flow rate), 4.24, 3.96, and 3.85 (pH), and 2.56, 1.93, and 1.13 mg/dm3 (inlet TCS concentration) for Al-PILCAE, Al-PILCBE, and Al-PILCCM, respectively. From these results synthetic Al-PILC are effective and promising sorbents that can be used for analytical purposes in SPE, and that RSM-BDD is an effective and reliable tool for evaluating and optimizing the adsorption conditions for emerging contaminants in a fixed-bed column system.