Person:
Sehrai, Daniyal Ali

Loading...
Profile Picture

Email Address

Birth Date

Job Title

Last Name

Sehrai

First Name

Daniyal Ali

person.page.departamento

Ingeniería Eléctrica, Electrónica y de Comunicación

person.page.instituteName

person.page.observainves

person.page.upna

Name

Search Results

Now showing 1 - 2 of 2
  • PublicationOpen Access
    Design and characterization of a meandered V-shaped antenna using characteristics mode analysis and its MIMO configuration for future mmWave devices
    (Elsevier, 2024-08-18) Elmannai, Hela; Kiani, Saad Hassan; Shariff, B.G. Parveez; Sehrai, Daniyal Ali; Ali, Tanweer; Rafique, Umair; Algarni, Abeer D.; Ingeniería Eléctrica, Electrónica y de Comunicación; Ingeniaritza Elektrikoa, Elektronikoa eta Telekomunikazio Ingeniaritza; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
    This study presents a novel four-element MIMO antenna system designed for the millimeter-wave (mmWave) spectrum. Each MIMO antenna element features a meandered V-shaped radiating structure fed by a 50Ω microstrip line and a partial ground plane with a square notch printed on a 0.254-mm thick RO5880 substrate. The characteristic mode analysis (CMA) of the antenna is done, which reveals that the antenna efficiently utilizes Mode 2, while Modes 1 and 4 also contribute to the resonance, resulting in a wideband response within the mmWave spectrum. A four-element pattern diversity MIMO configuration is developed to evaluate its suitability for MIMO communication, incorporating a connected ground-structure decoupling network to enhance isolation. The MIMO system achieves over 20 dB isolation between elements, with an impedance bandwidth ranging from 20.2 to 33.05 GHz and a peak gain of 6.6 dBi at 28 GHz. Fabrication and measurement validate the design, showing strong agreement with simulations. The MIMO performance metrics, including envelope correlation coefficient (ECC), diversity gain (DG), mean effective gain (MEG), total active reflection coefficient (TARC), and channel capacity loss (CCL), are within acceptable limits, suggesting that the proposed MIMO antenna system is a promising candidate for future mmWave applications.
  • PublicationOpen Access
    Pattern diversity based four-element dual-band MIMO patch antenna for 5G mmWave communication networks
    (Springer, 2024) Sethi, Waleed Tariq; Kiani, Saad Hassan; Munir, Mehre E.; Sehrai, Daniyal Ali; Savci, Huseyin Serif; Awan, Dawar; Ingeniería Eléctrica, Electrónica y de Comunicación; Ingeniaritza Elektrikoa, Elektronikoa eta Telekomunikazio Ingeniaritza; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa.
    This study presents a planar dual-band multiple-input multiple-output (MIMO) antenna design for the prospective ffth-generation (5G) frequency bands of 28 and 38 GHz. The antenna element is designed by utilizing a rectangular patch with an ofset microstrip feeding technique. A dual-band response is achieved by placing semi-circular slots on each side of the patch element. To tune the frequency response and improve impedance matching, vertical rectangular slits are etched in the rectangular patch and the ground plane, respectively. The results show that the single antenna element ofers an impedance bandwidth of 2.52 GHz (26.32–28.84 GHz) and 7.5 GHz (34–41.5 GHz). In addition, a MIMO confguration based on pattern diversity using four antenna elements is designed and fabricated. The designed MIMO confguration achieves an impedance bandwidth of 3 GHz (27–30 GHz) and 5.46 GHz (35.54–41 GHz) at operating bands of 28 and 38 GHz. The peak realized gain for the single element at 28 and 38 GHz is noted to be 7.4 dBi and 7.5 dBi, respectively. Furthermore, the polarization diversity confguration illustrates an isolation of>15 dB and>25 dB for the 28 and 38 GHz frequency bands, respectively. Moreover, the MIMO confguration attains appropriate values for the envelope correlation coefcient (ECC) and diversity gain (DG), Total Active Refection Co-efcient (TARC), Channel Capacity Loss (CCL) and Mean Efective Gain (MEG) for the operating frequency bands. The proposed MIMO system based on results seems to be potential choice for mmwave Ka Band Applications.