Open Access
Spatial characterization of personal RF-EMF exposure in public transportation buses
(IEEE, 2019) Celaya Echarri, Mikel; Azpilicueta Fernández de las Heras, Leyre; López Iturri, Peio; Aguirre Gallego, Erik; Miguel Bilbao, Silvia de; Ramos, Victoria; Falcone Lanas, Francisco; Ingeniería Eléctrica, Electrónica y de Comunicación; Institute of Smart Cities - ISC; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren
New services and applications within vehicular environments employ multiple wireless communication systems, within a Heterogeneous Network framework. In this context, evaluation of electromagnetic field impact is compulsory, in order to warrant compliance with current exposure limits. In this work, E-field strength distribution within urban transportation buses is studied, in which different types of buses as well as network configurations are considered. E-field estimations are obtained within the complete interior volume of the urban buses, considering all of the characteristics in terms of bus structure and materials employed, by means of an in-house developed deterministic 3D Ray-Launching (3D-RL) code. In this way, relevant phenomena in terms of electromagnetic propagation and interaction are considered, such as multipath propagation and shadowing, which determine exposure levels as a function of transceiver location within the bus scenarios. The behavior in terms of E-field distribution of wireless Public Land Mobile communication systems within transportation buses have been analyzed by means of measurement campaigns employing personal exposimeter devices. In addition, E-field volumetric distributions by means of 3D-RL simulations have been obtained as a function of user distribution within the buses, with the aim of analyzing the impact of user presence within complex intra-vehicular indoor scenarios such as urban transportation buses. A comparison with current exposure limits given by currently adopted standards is obtained, showing that E-field levels were below the aforementioned limits. The use of deterministic simulation techniques based on 3D-RL enables E-field exposure analysis in complex indoor scenarios, offering an optimized balance between accuracy and computational cost. These results and the proposed simulation methodology, can aid in an adequate assessment of human exposure to non-ionizing radiofrequency fields in public transportation buses, considering the impact of the morphology and the topology of vehicles, for current as well as for future wireless technologies and exposure limits.
Open Access
Evaluation of electromagnetic interference and exposure assessment from s-Health solutions based on Wi-Fi devices
(Hindawi Publishing Corporation, 2015) Miguel Bilbao, Silvia de; Aguirre Gallego, Erik; Azpilicueta Fernández de las Heras, Leyre; Roldán Madroñero, José; Ramos González, Victoria; Falcone Lanas, Francisco; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
In the last decade the number of wireless devices operating at the frequency band of 2.4GHz has increased in several settings, such as healthcare, occupational, and household. In this work, the emissions fromWi-Fi transceivers applicable to context aware scenarios are analyzed in terms of potential interference and assessment on exposure guideline compliance. Near field measurement results as well as deterministic simulation results on realistic indoor environments are presented, providing insight on the interaction between theWi-Fi transceiver and implantable/body area network devices as well as other transceivers operating within an indoor environment, exhibiting topological and morphological complexity. By following approaches (near field estimation/deterministic estimation), colocated body situations as well as large indoor emissions can be determined.The results show in general compliance with exposure levels and the impact of overall network deployment, which can be optimized in order to reduce overall interference levels while maximizing system performance.
Open Access
Electromagnetic characterization of uhf-rfid fixed reader in healthcare centers related to the personal and labor health
(IEEE, 2022) Ramos, Victoria; Suárez, Óscar Javier; Febles Santana, Víctor M.; Suárez Rodríguez, David Samuel; Aguirre Gallego, Erik; Miguel Bilbao, Silvia de; Marina, Pablo; Rabassa López-Calleja, Luis Enrique; Celaya Echarri, Mikel; Falcone Lanas, Francisco; Hernández Armas, Jose Ángel; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Institute of Smart Cities - ISC; Ingeniería Eléctrica, Electrónica y de Comunicación
Hospitals and healthcare centers are experiencing a remarkable implementation of new systems based on wireless communications technologies. Many of these systems provide location services and identification of materials, instrumentation and even patients, which promotes the increase of the quality and the efficiency of healthcare. A tracking system based on short-range radio frequency, UHF-RFID is evaluated. This system helps with location of orthopedic prosthesis according to the criteria and requirements of a specific hospital environment. It is characterized the influence of UHF-RFID system in the electromagnetic environment by measuring the parameters and characteristics of the emission levels. The results of the assessment are represented through 2D contour maps and simulations have been performed by means of an in-house 3D-RL algorithm. The proposed graph aims to provide a methodology of studying the electromagnetic environments and the evaluation of the safety conditions of workers, patients, and people in general. E field exposure levels due to the RFID localization system were analyzed in order to verify regulations concerning the safety of patients and the general public in the labor and healthcare fields. Localized electromagnetic field exposure at levels which may cause electromagnetic hazards in the specific healthcare environment have been found and potentially excessive exposure to EMF emitted by UHF RFID devices may apply to patients or bystanders. In all cases, insufficient electromagnetic immunity of electronic devices (including AIMD and other medical devices) should be considered and the electromagnetic hazards may be limited also by relevant preventive measures, as also shown in this paper, together with the principles of an in-situ evaluation of electromagnetic hazards near the UHF-RFID devices.
Open Access
Estimation of radiofrequency power leakage from microwave ovens for dosimetric assessment at nonionizing radiation exposure levels
(Hindawi, 2015) López Iturri, Peio; Miguel Bilbao, Silvia de; Aguirre Gallego, Erik; Azpilicueta Fernández de las Heras, Leyre; Falcone Lanas, Francisco; Ramos González, Victoria; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
The electromagnetic field leakage levels of nonionizing radiation from a microwave oven have been estimated within a complex indoor scenario. By employing a hybrid simulation technique, based on coupling full wave simulation with an in-house developed deterministic 3D ray launching code, estimations of the observed electric field values can be obtained for the complete indoor scenario. The microwave oven can be modeled as a time- and frequency-dependent radiating source, in which leakage, basically from the microwave oven door, is propagated along the complete indoor scenario interacting with all of the elements present in it. Thismethod can be of aid in order to assess the impact of such devices on expected exposure levels, allowing adequate minimization strategies such as optimal location to be applied.

Aguirre Gallego, Erik

Email Address

person.page.identifierURI

Birth Date

Job Title

Last Name

First Name

person.page.departamento

person.page.instituteName

ORCID

person.page.observainves

person.page.upna

Name

Filters

Author

Subject

Date

Has files

Item Type

Type

Settings

Sort By

Results per page

Search Results