Open Access
Photogrammetrical and field measurement of gullies with contrasting morphology
(Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa, 2007) Marzolff, I.; Giménez Díaz, Rafael; Seeger, M.; Campo-Bescós, Miguel; Ries, J. B.; Casalí Sarasíbar, Javier; Álvarez-Mozos, Jesús; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak
Despite a wealth of studies on monitoring different types of gullies by using remote-sensing technique such as photogrammetry, relatively few efforts have been made to test their accuracy. Therefore the question arises as to what extent the accuracy of gully monitoring using photogrammetric technique depends on gully morphology. The objective of this work is to investigate this issue. To do that, we confront field measurements of cross-sectional areas of gullies with contrasting morphology with a similar dataset obtained using photogrammetry. Below, we present the first findings of this investigation.
Open Access
Influence of surface roughness spatial variability and temporal dynamics on the retrieval of soil moisture from SAR observations
(MDPI, 2009) Álvarez-Mozos, Jesús; Verhoest, Niko E. C.; Larrañaga Urien, Arantzazu; Casalí Sarasíbar, Javier; González de Audícana Amenábar, María; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak
Radar-based surface soil moisture retrieval has been subject of intense research during the last decades. However, several difficulties hamper the operational estimation of soil moisture based on currently available spaceborne sensors. The main difficulty experienced so far results from the strong influence of other surface characteristics, mainly roughness, on the backscattering coefficient, which hinders the soil moisture inversion. This is especially true for single configuration observations where the solution to the surface backscattering problem is ill-posed. Over agricultural areas cultivated with winter cereal crops, roughness can be assumed to remain constant along the growing cycle allowing the use of simplified approaches that facilitate the estimation of the moisture content of soils. However, the field scale spatial variability and temporal variations of roughness can introduce errors in the estimation of soil moisture that are difficult to evaluate. The objective of this study is to assess the impact of roughness spatial variability and roughness temporal variations on the retrieval of soil moisture from radar observations. A series of laser profilometer measurements were performed over several fields in an experimental watershed from September 2004 to March 2005. The influence of the observed roughness variability and its temporal variations on the retrieval of soil moisture is studied using simulations performed with the Integral Equation Model, considering different sensor configurations. Results show that both field scale roughness spatial variability and its temporal variations are aspects that need to be taken into account, since they can introduce large errors on the retrieved soil moisture values.
Open Access
Factors controlling sediment export in a small agricultural watershed in Navarre (Spain)
(Elsevier, 2012) Giménez Díaz, Rafael; Casalí Sarasíbar, Javier; Grande Esteban, Ildefonso; Díez Beregaña, Javier; Campo-Bescós, Miguel; Álvarez-Mozos, Jesús; Goñi Garatea, Mikel; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak; Gestión de Empresas; Enpresen Kudeaketa; Gobierno de Navarra / Nafarroako Gobernua
It is recognised that the hydrological and erosion processes in watersheds are very much conditioned by the (inter)action of a number of variables. This paper covers a 15-year period of studying those factors that have a major influence on the sediment yield and transport during individual hydrological events in a small Mediterranean agricultural watershed. Multivariate statistical techniques such as cluster analysis and principal component analysis were applied for the interpretation of datasets. In addition, the relationships between suspended sediment concentration and discharge (hysteretic loops) were also analysed. The hydrological response of the studied watershed is mainly controlled by the antecedent condition of the flow. Most of the runoff and sediment are generated during the wet season when vegetation cover is scant and saturation overland flow occurs promptly as a response to almost any rainfall events. In contrast, during the dry seasons even if high-intensity rainfalls normally occur, very scant runoffs are, however recorded, at the exit of the watershed. Most of the eroded sediment seems to come from riparian areas. The discharge registered at the watershed outlet up to 1 h prior to the flood is a very good surrogate for antecedent soil moisture.
Open Access
On the assimilation set-up of ASCAT soil moisture data for improving streamflow catchment simulation
(Elsevier, 2018) Loizu Maeztu, Javier; Massari, Christian; Álvarez-Mozos, Jesús; Tarpanelli, Angelica; Brocca, Luca; Casalí Sarasíbar, Javier; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak
Assimilation of remotely sensed surface soil moisture (SSM) data into hydrological catchment models has been identified as a means to improve stream flow simulations, but reported results vary markedly depending on the particular model, catchment and assimilation procedure used. In this study, the in fluence of key aspects, such as the type of model, re-scaling technique and SSM observation error considered, were evaluated. For this aim, Advanced SCATterometer ASCAT-SSM observations were assimilated through the ensemble Kalman filter into two hydrological models of different complexity namely MISDc and TOPLATS) run on two Mediterranean catchments of similar size (750 km2). Three different re-scaling techniques were evaluated (linear re-scaling, variance matching and cumulative distribution function matching), and SSM observation error values ranging from 0.01% to 20% were considered. Four different efficiency measures were used for evaluating the results. Increases in Nash-Sutcliffe efficiency (0.03–0.15) and efficiency indices (10–45%) were obtained, especially when linear re-scaling and observation errors within 4-6% were considered. This study found out that there is a potential to improve stream flow prediction through data assimilation of remotely sensed SSM in catchments of different characteristics and with hydrological models of different conceptualizations schemes, but for that, a careful evaluation of the observation error and re-scaling technique set-up utilized is required.
Open Access
Effect of topography on retreat rate of different gully headcuts in Bardenas Reales area (Navarre, Spain)
(Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa, 2007) Campo-Bescós, Miguel; Álvarez-Mozos, Jesús; Casalí Sarasíbar, Javier; Giménez Díaz, Rafael; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak
In Northeast Spain, gullying is a widespread phenomenon. This type of erosion is especially intense in Bardenas Reales (Navarre) where at least two major typical kinds of gully headcut are present. A first group developed in soil material (named, conventional gully headcut), and second group of gully headcut with a sandstone layer as a top horizon (named, sandstone gully headcut). In addition, within the former group, we can distinguish a subgroup of gully headcuts developed in soils particularly prone to piping and tunnelling due to the dispersive condition of the materials (named piping associated gully headcut). In this situation, a question arises: to what extent simple topographic parameters account for the retreat rate of the different kind of gully headcuts observed in the region of Bardenas Reales? The aim of this study was to investigate and gain insight in this issue.
Open Access
Evaluation of TOPLATS on three Mediterranean catchments
(Elsevier, 2016) Loizu Maeztu, Javier; Álvarez-Mozos, Jesús; Casalí Sarasíbar, Javier; Goñi Garatea, Mikel; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
Physically based hydrological models are complex tools that provide a complete description of the different processes occurring on a catchment. The TOPMODEL-based Land-Atmosphere Transfer Scheme (TOPLATS) simulates water and energy balances at different time steps, in both lumped and distributed modes. In order to gain insight on the behavior of TOPLATS and its applicability in different conditions a detailed evaluation needs to be carried out. This study aimed to develop a complete evaluation of TOPLATS including: 1) a detailed review of previous research works using this model; 2) a sensitivity analysis (SA) of the model with two contrasted methods (Morris and Sobol) of different complexity; 3) a 4-step calibration strategy based on a multi-start Powell optimization algorithm; and 4) an analysis of the influence of simulation time step (hourly vs. daily). The model was applied on three catchments of varying size (La Tejeria, Cidacos and Arga), located in Navarre (Northern Spain), and characterized by different levels of Mediterranean climate influence. Both Morris and Sobol methods showed very similar results that identified Brooks-Corey Pore Size distribution Index (B), Bubbling pressure (ψc) and Hydraulic conductivity decay (f) as the three overall most influential parameters in TOPLATS. After calibration and validation, adequate streamflow simulations were obtained in the two wettest catchments, but the driest (Cidacos) gave poor results in validation, due to the large climatic variability between calibration and validation periods. To overcome this issue, an alternative random and discontinuous method of cal/val period selection was implemented, improving model results.
Open Access
Evaluation of 2D models for the prediction of surface depression storage using realistic reference values
(Wiley, 2016) Giménez Díaz, Rafael; Mezkiritz Barberena, Irantzu; Campo-Bescós, Miguel; Álvarez-Mozos, Jesús; González de Audícana Amenábar, María; Martínez de Aguirre Escobar, Alejandro; Casalí Sarasíbar, Javier; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak
Depression storage (DS) is the maximum storage of precipitation and runoff in the soil surface at a given slope. The DS is determined by soil roughness that in agricultural soils is largely affected by tillage. The direct measurement of DS is not straightforward because of the natural permeability of the soil. Therefore, DS has generally been estimated from 2D/3D empirical relationships and numerical algorithms based on roughness indexes and height measurements of the soil surface, respectively. The objective of this work was to evaluate the performance of some 2D models for DS, using direct and reliable measurements of DS in an agricultural soil as reference values. The study was carried out in experimental microplots where DS was measured in six situations resulting from the combination of three types of tillage carried out parallel and perpendicular to the main slope. Those data were used as reference to evaluate four empirical models and a numerical method. Longitudinal altitudinal profiles of the relief were obtained by a laser profilometer. Infiltration measurements were carried out before and after tillage. The DS was largely affected by tillage and its direction. Highest values of DS are found on rougher surfaces mainly when macroforms cut off the dominant slope. The empirical models had a limited performance while the numerical method was the most effective, even so, with an important variability. In addition, a correct hydrological management should take into account that each type of soil tillage affects infiltration rate differently.
Open Access
Accuracy of methods for field assessment of rill and ephemeral gully erosion
(Elsevier, 2006) Casalí Sarasíbar, Javier; Loizu Maeztu, Javier; Campo-Bescós, Miguel; Santisteban Comino, Luisa María de; Álvarez-Mozos, Jesús; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak
To properly assess soil erosion in agricultural areas, it is necessary to determine precisely the volume of ephemeral gullies and rills in the field by using direct measurement procedures. However, little information is available on the accuracy of the different methods used. The main purpose of this paper is to provide information for a suitable assessment of rill and ephemeral gully erosion with such direct measurement methods. To achieve this objective: a) the measurement errors associated to three methods used for field assessment of channel cross sectional areas are explored; b) the influence of the number of cross sections used per unit channel length on the assessment accuracy, is analysed and; c) the effect of the channel size and shape on measurement errors is examined. The three methods considered to determine the cross sectional areas were: micro-topographic profile meter (1); detailed measurement of section characteristic lengths with a tape (2); measurement of cross section width and depth with a tape (3). Five reaches of different ephemeral gully types 14.0 or 30.0 m long and a set of six 20.4 to 29.4 m long rill reaches were selected. On each gully reach, the cross sectional areas were measured using the three above mentioned methods, with a separation (s) between cross sections of 1 m. For rills, the cross sectional areas were measured with methods 1 and 3, with s= 2 m. Then, the corresponding total erosion volumes were computed. The volume calculated with method 1 with s= 1 m for gullies and s= 2 m for rills was taken as the reference method. For each channel, and for each one of the possible combinations of s and measurement method (m), the relative measurement error and the absolute value of the relative measurement error (Ersm and |Ersm| ), defined with respect to the reference one, was calculated. |Ersm| much higher than 10% were obtained very easily, even for small s values and for apparently quasi prismatic channels. Channel size and shape had a great influence on measurement errors. In fact, the selection of the more suitable method for a certain gully shape and size seemed to be much more important than s, at least when s< 10 m. Method 1 always provided the most precise measurements, and its results were the less dependent on s. However, s must be <5 m to guarantee an error smaller than 10%. Method 2 is not recommended, because it is difficult, time consuming and can lead to large errors. Method 3 seems to be enough for small, wide and shallow gullies, and for small rills, but only if s is shorter than 5 m. Results obtained after the analysis of rill measurement errors were similar to those of gullies. The analysis of Ersm and |Ersm| when calculating channel volumes using a unique representative cross section highlighted the importance of correctly selecting the adequate cross section. Due to the high error values that this method can entail, it is not considered as advisable whenever accurate erosion measurements are pursued.