Open Access
In-situ assessment of the spatial arrangement of step-pool units on eroded rills
(wiley, 2019) Govers, G.; Campo-Bescós, Miguel; Zubieta Laseca, Elena; Giménez Díaz, Rafael; Ingeniaritza; Institute on Innovation and Sustainable Development in Food Chain - ISFOOD; Ingeniería
Open Access
Evaluation of the impact of changing from rainfed to irrigated agriculture in a mediterranean watershed in Spain
(MDPI, 2023) Oduor, Brian Omondi; Campo-Bescós, Miguel; Lana Renault, Noemí; Alfaro Echarri, Alberto; Casalí Sarasíbar, Javier; Ingeniería; Ingeniaritza; Institute on Innovation and Sustainable Development in Food Chain - ISFOOD
The conversion of cultivated areas from rainfed to irrigated agriculture alters the watershed’s hydrology and could affect the water quality and quantity. This study examined how streamflow, nitrate load, and nitrate concentration changed after irrigation implementation in a Mediterranean watershed in Navarre, Spain. The Soil Water Assessment Tool (SWAT) model was applied in the Cidacos River watershed to simulate streamflow and nitrate load under rainfed conditions. The simulated outputs were then compared with the post-irrigation observed values from mid-2017 to 2020 at the watershed outlet in Traibuenas to determine the irrigation impact. The model calibration (2000–2010) and validation (2011–2020) results for streamflow (NSE = 0.82/0.83) and nitrate load (NSE = 0.71/0.68) were satisfactory, indicating the model’s suitability for use in the watershed. A comparison of the rainfed and post-irrigation periods showed an average annual increase in streamflow (952.33 m3 ha−1, +18.8%), nitrate load (68.17 kg ha−1, +62.3%), and nitrate concentration (0.89 mg L−1 ha−1, +79%) at the watershed outlet. Irrigation also caused seasonal changes by altering the cropping cycle and increasing the streamflow and nitrate export during the summer and autumn when irrigation was at its peak. The increases in the post-irrigation period were attributed to the added irrigation water for streamflow and increased nitrogen fertilizer application due to changes in cropping for nitrate concentration and export. These findings are useful to farmers and managers in deciding the best nitrate pollution control and management measures to implement. Furthermore, these results could guide future development and expansion of irrigated lands to improve agricultural sustainability.
Open Access
Crop type mapping based on Sentinel-1 backscatter time series
(IEEE, 2018) Arias Cuenca, María; Campo-Bescós, Miguel; Álvarez-Mozos, Jesús; Ingeniería; Ingeniaritza
The high revisit time of Sentinel-1 (S1) observations enables the design of crop type mapping approaches exploiting the backscatter time series observed for the different crops. The objective of this study is to propose a supervised crop classification methodology based on the temporal signature of crops. With this aim 29 dual-pol S1 observations acquired over an agricultural area of Spain, where ground truth was available, were processed. The classification approach was based on the temporal signatures obtained for each polarization channel (VH, VV and the cross-pol ratio) for the different crops. Highest accuracies were obtained when fields were assigned to the class that minimized the RMSE, with an overall accuracy of 79% and best results for rapeseed, sunflower, alfalfa and barley.
Open Access
Accuracy of methods for field assessment of rill and ephemeral gully erosion
(Elsevier, 2006) Casalí Sarasíbar, Javier; Loizu Maeztu, Javier; Campo-Bescós, Miguel; Santisteban Comino, Luisa María de; Álvarez-Mozos, Jesús; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak
To properly assess soil erosion in agricultural areas, it is necessary to determine precisely the volume of ephemeral gullies and rills in the field by using direct measurement procedures. However, little information is available on the accuracy of the different methods used. The main purpose of this paper is to provide information for a suitable assessment of rill and ephemeral gully erosion with such direct measurement methods. To achieve this objective: a) the measurement errors associated to three methods used for field assessment of channel cross sectional areas are explored; b) the influence of the number of cross sections used per unit channel length on the assessment accuracy, is analysed and; c) the effect of the channel size and shape on measurement errors is examined. The three methods considered to determine the cross sectional areas were: micro-topographic profile meter (1); detailed measurement of section characteristic lengths with a tape (2); measurement of cross section width and depth with a tape (3). Five reaches of different ephemeral gully types 14.0 or 30.0 m long and a set of six 20.4 to 29.4 m long rill reaches were selected. On each gully reach, the cross sectional areas were measured using the three above mentioned methods, with a separation (s) between cross sections of 1 m. For rills, the cross sectional areas were measured with methods 1 and 3, with s= 2 m. Then, the corresponding total erosion volumes were computed. The volume calculated with method 1 with s= 1 m for gullies and s= 2 m for rills was taken as the reference method. For each channel, and for each one of the possible combinations of s and measurement method (m), the relative measurement error and the absolute value of the relative measurement error (Ersm and |Ersm| ), defined with respect to the reference one, was calculated. |Ersm| much higher than 10% were obtained very easily, even for small s values and for apparently quasi prismatic channels. Channel size and shape had a great influence on measurement errors. In fact, the selection of the more suitable method for a certain gully shape and size seemed to be much more important than s, at least when s< 10 m. Method 1 always provided the most precise measurements, and its results were the less dependent on s. However, s must be <5 m to guarantee an error smaller than 10%. Method 2 is not recommended, because it is difficult, time consuming and can lead to large errors. Method 3 seems to be enough for small, wide and shallow gullies, and for small rills, but only if s is shorter than 5 m. Results obtained after the analysis of rill measurement errors were similar to those of gullies. The analysis of Ersm and |Ersm| when calculating channel volumes using a unique representative cross section highlighted the importance of correctly selecting the adequate cross section. Due to the high error values that this method can entail, it is not considered as advisable whenever accurate erosion measurements are pursued.
Open Access
Dissolved solids and suspended sediment dynamics from five small agricultural watersheds in Navarre, Spain: a 10-year study
(Elsevier, 2019) Merchán Elena, Daniel; Luquin Oroz, Eduardo Adrián; Hernández García, Iker; Campo-Bescós, Miguel; Giménez Díaz, Rafael; Casalí Sarasíbar, Javier; Valle de Lersundi, Jokin del; Ingeniaritza; Institute on Innovation and Sustainable Development in Food Chain - ISFOOD; Ingeniería; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
Dissolved solids (DS) and suspended sediment (SS) loads are considered relevant environmental problems. They are related to a wide range of on-site and off-site impacts, such as soil erosion or salinization of water bodies. In this study, the dynamics of DS and SS concentrations and loads were assessed in five small watersheds covering representative agricultural land uses in Navarre (Spain). To this end, discharge, DS and SS concentration data were collected during ten hydrological years at each watershed outlet, and loads were computed from discharge and concentration values. DS concentration followed a seasonal pattern imposed by the availability of water, with higher concentrations recorded in low-flow periods and lower concentration in the high-flow period. SS concentration was extremely variable, with a range of 2–4 orders of magnitude in concentration for any specific discharge. Temporal variations (both intra- and inter-annual) in DS loads were explained by differences in runoff, whereas those of SS were not, being the SS loads associated mainly with specific high flow events. These temporal patterns were observed for both agricultural (this study) and non-agricultural (literature) watersheds. From the data in the Navarrese watersheds and those available in the literature, we inferred that agricultural land use, in general, tends to increase the concentration of both DS and SS. Regarding DS and SS yields, the effects of agricultural land use on DS yields are controlled by the changes in runoff rather than the (small) changes in DS concentration. In this sense, land uses changes expected to increase runoff (i.e., a shift from forested to arable or from rainfed to irrigated agriculture) would increase DS yields. On the other hand, agricultural land use tends to increase SS yields, although the effect is highly variable depending on site-specific factors, both natural (e.g., watershed shape) and anthropogenic (e.g., degree of soil conservation practices). In the Navarrese watersheds, DS yields ranged from 1.1 to 2.2 Mg ha−1 year−1 whereas SS yields ranged from 0.3 to 4.3 Mg ha−1 year−1. DS yields seem to dominate under non-agricultural conditions and in most agricultural land uses at the small watershed scale. On the other hand, SS yields dominate in watersheds with increased soil erosion as a consequence of arable land use over erosion-prone watersheds.
Open Access
Gully geometry: what are we measuring?
(European Geosciences Union, 2015) Casalí Sarasíbar, Javier; Giménez Díaz, Rafael; Campo-Bescós, Miguel; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak
Much of the research on (ephemeral) gully erosion comprises the determination of the geometry of these eroded channels, especially their width and depth. This is not a simple task due to uncertainty generated by the wide range of variability in gully cross section shapes found in the field. However, in the literature, this uncertainty is not recognized so that no criteria for their measurement are indicated. The aim of this work is to make researchers aware of the ambiguity that arises when characterizing the geometry of an ephemeral gully and similar eroded channels. In addition, a measurement protocol is proposed with the ultimate goal of pooling criteria in future works. It is suggested that the geometry of a gully could be characterized through its mean equivalent width and mean equivalent depth, which, together with its length, define an “equivalent prismatic gully” (EPG). The latter would facilitate the comparison between different gullies.
Open Access
Extended assessment of sprinkler irrigation uniformity in greenhouses using GIS and hydraulic modeling
(MDPI, 2022) Barberena Ruiz, Íñigo; Campo-Bescós, Miguel; Casalí Sarasíbar, Javier; Ingeniaritza; Institute on Innovation and Sustainable Development in Food Chain - ISFOOD; Ingeniería; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
Traditionally, distribution uniformity has been obtained by using rain gauges, which makes it a very expensive process. This paper sought to create a simulation strategy using QGIS and EPANET, both free software, that allowed the simulation of the water application results of all the emitters of an irrigation installation. In this way, it was possible to obtain the geospatial representation of the applied water and finally to know the distribution uniformity in the whole installation. The simulation finally fulfilled its objective and was compared with a study of distribution uniformity with rain gauges. The biggest difference between the measured and simulated data was a difference of 5.76% among the sectors. The simulated uniformity was very similar to the measured uniformity, which allowed us to affirm that the proposed simulation methodology was adequate. We believe that the methodology proposed in this article could be very useful in improving the management of sprinkler irrigation systems, particularly those in which distribution uniformity is of special importance. These improvements in management can also result in savings in water and other inputs, which are becoming increasingly important in the current context of climate change and the reduction in the impact of agriculture on the environment. Finally, similar studies could be carried out with the same tools for other pressurized irrigation systems, such as sprinkler irrigation outside greenhouses and drip irrigation.
Open Access
Demonstrating correspondence between decision-support models and dynamics of real-world environmental systems
(Elsevier, 2016) Huffaker, Ray; Muñoz Carpena, Rafael; Campo-Bescós, Miguel; Southworth, Jane; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak
There are increasing calls to audit decision-support models used for environmental policy to ensure that they correspond with the reality facing policy makers. Modelers can establish correspondence by providing empirical evidence of real-world behavior that their models skillfully simulate. Since real-world behavior—especially in environmental systems—is often complex, credibly modeling underlying dynamics is essential. We present a pre-modeling diagnostic framework based on Nonlinear Time Series (NLTS) methods for reconstructing real-world environmental dynamics from observed data. The framework is illustrated with a case study of saltwater intrusion into coastal wetlands in Everglades National Park, Florida, USA. We propose that environmental modelers test for systematic dynamic behavior in observed data before resorting to conventional stochastic exploratory approaches unable to detect this valuable information. Reconstructed data dynamics can be used, along with other expert information, as a rigorous benchmark to guide specification and testing of environmental decision-support models corresponding with real-world behavior.
Open Access
Factors controlling sediment export in a small agricultural watershed in Navarre (Spain)
(Elsevier, 2012) Giménez Díaz, Rafael; Casalí Sarasíbar, Javier; Grande Esteban, Ildefonso; Díez Beregaña, Javier; Campo-Bescós, Miguel; Álvarez-Mozos, Jesús; Goñi Garatea, Mikel; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak; Gestión de Empresas; Enpresen Kudeaketa; Gobierno de Navarra / Nafarroako Gobernua
It is recognised that the hydrological and erosion processes in watersheds are very much conditioned by the (inter)action of a number of variables. This paper covers a 15-year period of studying those factors that have a major influence on the sediment yield and transport during individual hydrological events in a small Mediterranean agricultural watershed. Multivariate statistical techniques such as cluster analysis and principal component analysis were applied for the interpretation of datasets. In addition, the relationships between suspended sediment concentration and discharge (hysteretic loops) were also analysed. The hydrological response of the studied watershed is mainly controlled by the antecedent condition of the flow. Most of the runoff and sediment are generated during the wet season when vegetation cover is scant and saturation overland flow occurs promptly as a response to almost any rainfall events. In contrast, during the dry seasons even if high-intensity rainfalls normally occur, very scant runoffs are, however recorded, at the exit of the watershed. Most of the eroded sediment seems to come from riparian areas. The discharge registered at the watershed outlet up to 1 h prior to the flood is a very good surrogate for antecedent soil moisture.
Open Access
Spatial variability of the relationships of runoff and sediment yield with weather types throughout the Mediterranean basin
(Elsevier, 2019) Peña-Angulo, Dahis; Nadal-Romero, Estela; González-Hidalgo, J. Carlos; Albaladejo, J.; Andreu, V.; Bagarello, Vincenzo; Barhi, H.; Batalla, R.J.; Bernal, S.; Bienes, Ramón; Campo, J.; Campo-Bescós, Miguel; Canatário-Duarte, Antonio; Cantón, Yolanda; Casalí Sarasíbar, Javier; Castillo, Víctor M.; Cerdà, Artemi; Cheggour, A.; Cid, Patricio; Cortesi, N.; Desir, G; Díaz-Pereira, E.; Espigares, T.; Estrany, J.; Fernández-Raga, M.; Ferreira, Carla S.S.; Ferro, Vito; Gallart, F.; Giménez Díaz, Rafael; Gimeno, E.; Gómez, Jose A.; Gómez Gutiérrez, Á.; Gómez-Macpherson, Helena; González-Pelayo, O.; Hueso-González, P.; Kairis, O.; Karatzas, G.P.; Klotz, S.; Kosmas, C.; Lana Renault, Noemí; Lasanta, T.; Latron, J.; Lázaro, Roberto; Le Bissonnais, Y.; Le Bouteiller, Caroline; Licciardello, Feliciana; López-Tarazón, J.A.; Lucía, Ana; Marín, C.; Marqués, M.J.; Martínez-Fernández, J.; Martínez-Mena, M.; Martínez-Murillo, J.F.; Mateos, Luciano; Mathys, N.; Merino-Martin, L.; Moreno de las Heras, Mariano; Moustakas, N.; Nicolau, J.M.; Novara, A.; Pampalone, Vincenzo; Raclot, D.; Rodríguez-Blanco, M. Luz; Rodrigo-Comino, J.; Romero Díaz, A.; Roose, E.; Rubio, J.L.; Ruiz-Sinoga, J.D.; Schnabel, Susanne; Senciales-González, J.M.; Simonneaux, V.; Solé-Benet, A.; Taguas, Encarnación V.; Taboada-Castro, M. Mercedes; Taboada-Castro, M.T.; Todisco, F.; Úbeda, Xavier; Varouchakis, E.A.; Vericat, D.; Wittenberg, L.; Zabaleta, Ane; Zorn, M.; Ingeniería; Ingeniaritza; Institute on Innovation and Sustainable Development in Food Chain - ISFOOD

Campo-Bescós, Miguel

Email Address

person.page.identifierURI

Birth Date

Job Title

Last Name

First Name

person.page.departamento

person.page.instituteName

ORCID

person.page.observainves

person.page.upna

Name

Filters

Author

Subject

Date

Has files

Item Type

Type

Settings

Sort By

Results per page

Search Results