Browsing by UPNA Author "Ozcariz Celaya, Aritz"
Now showing items 1-19 of 19
-
All-fiber ellipsometer for nanoscale dielectric coatings
Multiple mode resonance shifts in tilted fiber Bragg gratings (TFBGs) are used to simultaneously measure the thickness and the refractive index of TiO2 thin films formed by Atomic Layer Deposition (ALD) on optical fibers. ... -
Aluminum doped zinc oxide (AZO) coated optical fiber LMR refractometers. An experimental demonstration
This work presents the experimental demonstration of lossy mode resonance generation by means of aluminum doped zinc oxide thin-films. The use of such material may allow to optimize the performance of LMR-based sensors, ... -
Beyond near-infrared lossy mode resonances with fluoride glass optical fiber
The objective of this Letter consists of the exploration of the lossy mode resonance (LMR) phenomenon beyond the nearinfrared region and specifically in the short wave infrared region (SWIR) and medium wave infrared region ... -
A comprehensive review: materials for the fabrication of optical fiber refractometers based on lossy mode resonance
Lossy mode resonance based sensors have been extensively studied in recent years. The versatility of the lossy mode resonance phenomenon has led to the development of sensors based on different configurations that make use ... -
Copper oxide coated D-shaped optical fibers for the development of LMR refractometers
Lossy mode resonance (LMR) based refractometers obtained by means of copper oxide thin-films fabricated onto side-polished (D-shaped) are presented in this work. The high refractive index of copper oxide combined with the ... -
Electric discharge detection and localization using a distributed optical fiber vibration sensor
Partial discharges are a type of electric discharge that cause localized breakdowns in a small portion of an insulating material without forming a complete rupture. In high power electric machines as well as in transmission ... -
Gas detection using LMR-based optical fiber sensors
This work presents a first approach to the utilization of Lossy Mode Resonance (LMR) based optical fiber sensors for gas detection. The optical sensor is based on a SnO2 thin-film fabricated onto the core of cladding ... -
Generation of lossy mode resonances with different nanocoatings deposited on coverslips
The generation of lossy mode resonances (LMRs) with a setup based on lateral incidence of light in coverslips is a simple platform that can be used for sensing. Here the versatility of this platform is proved by studying ... -
Integrated platform for microfluidics based cell culture applications
The ongoing developments in the field of microfluidics-based cell culture have led to a significant interest in systems for their visualization and control. The existing cell culture systems are limiting due to cost, ... -
Is there a frontier in sensitivity with lossy mode resonance (LMR) based refractometers?
A tin dioxide thin layer has been studied in order to improve the sensitivity of lossy mode resonances (LMR) based sensors. The effects of the thin film thickness and the polarization of light in a SnO2 coated D-shaped ... -
Lossy mode resonance optical sensors based on indium-gallium-zinc oxide thin film
This work discusses an application of electrically conductive and optically transparent indium-gallium-zinc oxide (IGZO) thin films for fabrication of lossy mode resonance (LMR) based optical fiber refractometers. The films ... -
Materials for the fabrication of optical fiber refractometers based on lossy mode resonance
Lossy mode resonances (LMR) have been studied as an exceptional phenomenon for the development of optical fiber refractometers. These sensors rely on the interaction of the light propagating through the waveguide with a ... -
Micro and nanostructured materials for the development of optical fibre sensors
The measurement of chemical and biomedical parameters can take advantage of the features exclusively offered by optical fibre: passive nature, electromagnetic immunity and chemical stability are some of the most relevant ... -
Micro sized interdigital capacitor for humidity detection based on agarose coating
A micro sized interdigital capacitor has been proposed for the detection of relative humidity. The photolithography technique enables the fabrication of fingers with a size of 10x500 um. A thin film of agarose functionalizes ... -
Mode transition during deposition of nanoscale ITO coatings on tilted fiber Bragg gratings
The mode transition phenomenon is experimentally demonstrated in tilted fiber Bragg gratings (TFBG) through the deposition of an indium tin oxide (ITO) thin film employing a DC sputtering machine. -
Mode transitions and thickness measurements during deposition of nanoscale TiO2 coatings on tilted fiber Bragg gratings
The mode transition is a phenomenon observed in thin film coated long period fiber gratings (LPGs) and singlemode multimode single-mode (SMS) fibers for certain values of the coating thickness and refractive index, ... -
Performance analysis of a distributed optical fiber vibration sensor based on a sagnac interferometer
In this work, measuring capabilities of a Sagnac Interferometer-based Distributed Optical Fiber Sensor (DOFS) system are demonstrated by comparing its results to a conventional amplitude-based Distributed Acoustic Sensing ... -
Route towards a label-free optical waveguide sensing platform based on lossy mode resonances
According to recent market studies of the North American company Allied Market Research, the field of photonic sensors is an emerging strategic field for the following years and it is expected to garner $18 billion by ... -
Surface exciton polariton resonances (SEPR)-based sensors
(Elsevier, 2023) Artículo / ArtikuluaA new type of resonance in the development of sensors using long-range surface exciton polariton (LRSEP) phenomena has been coined: surface exciton plasmon resonance (SEPR). The resonance was obtained in the reflected ...