Buscar
Mostrando ítems 1-10 de 123
Tunable optical fiber pH sensors based on TE and TM Lossy Mode Resonances (LMRs)
(Elsevier, 2016)
Artículo / Artikulua,
In this paper, a high sensitivity optical fiber pH sensor based on lossy mode resonance (LMR) generated
with transversal electric (TE) and transversal magnetic (TM) polarized light is presented. Poly(allylamine
hydrochloride) ...
Experimental study and sensing applications of polarization-dependent lossy mode resonances generated by D-shape coated optical fibers
(IEEE, 2015)
Artículo / Artikulua,
The fabrication and characterization of an optical fiber refractometer based on Lossy Mode Resonances (LMR) is presented. TiO2/ poly (sodium 4-styrenesulfonate) (PSS) coatings deposited on side-polished D-shaped optical ...
Improving the width of lossy mode resonances in a reflection configuration D-shaped fiber by nanocoating laser ablation
(Optical Society of America, 2020)
info:eu-repo/semantics/article,
The full width at half maximum (FWHM) of lossy mode resonances (LMRs) in the optical spectrum depends on the homogeneity of the thin film deposited. In this Letter, a method for improving the FWHM is applied for an LMR ...
Wavelength and intensity based lossy mode resonance breathing sensor
(Elsevier, 2021)
info:eu-repo/semantics/article,
Copper oxide (CuO) allows the generation of lossy mode resonance (LMR) in a wide wavelength range of the optical spectrum, both in the visible and the near-infrared (NIR). For this, it is necessary to use a configuration ...
Optical fiber refractometers based on sputtered indium tin oxide coatings
(IEEE, 2011)
Contribución a congreso / Biltzarrerako ekarpena,
This work presents the fabrication of optical fiber
refractometers based on indium tin oxide (ITO) coatings
deposited by sputtering with response in the visible spectral
region. ITO thin-films have been sputtered by ...
Tunable sensitivity in long period fiber gratings during mode transition with low refractive index intermediate layer
(IEEE, 2022)
Artículo / Artikulua,
Double-clad fibers where the second cladding has a lower refractive index than the first cladding, prove to be ideal structures for potentiating and tuning the sensitivity in long-period fiber gratings (LPFGs) operating ...
Indium tin oxide refractometer in the visible and near infrared via lossy mode and surface plasmon resonances with Kretschmann configuration
(AIP Publishing, 2016)
Artículo / Artikulua,
An indium tin oxide (ITO) refractometer based on the generation of lossy mode resonances (LMRs) and surface plasmon resonances (SPRs) is presented. Both LMRs and SPRs are excited, in a single setup, under grazing angle ...
Mode transitions and thickness measurements during deposition of nanoscale TiO2 coatings on tilted fiber Bragg gratings
(IEEE, 2022)
Artículo / Artikulua,
The mode transition is a phenomenon observed in
thin film coated long period fiber gratings (LPGs) and singlemode multimode single-mode (SMS) fibers for certain values of
the coating thickness and refractive index, ...
Asymmetrically and symmetrically coated tapered optical fiber for sensing applications
(SPIE, 2015)
Contribución a congreso / Biltzarrerako ekarpena,
The deposition of a non-metallic thin-film in a symmetrically coated tapered optical fiber leads to the generation of resonances due to guidance of a mode in the thin-film. At certain conditions, the resonances overlap ...
Multi-sensing platform design with a grating-based nanostructure on a coverslip substrate
(Springer, 2023)
Contribución a congreso / Biltzarrerako ekarpena,
Two different thin film designs with a grating pattern are simulated on a soda lime coverslip, which acts as optical waveguide, with the purpose of generating both a lossy mode resonance (LMR) in transmission and reflection ...