Buscar
Mostrando ítems 1-10 de 30
Asymmetrically and symmetrically coated tapered optical fiber for sensing applications
(SPIE, 2015)
Contribución a congreso / Biltzarrerako ekarpena,
The deposition of a non-metallic thin-film in a symmetrically coated tapered optical fiber leads to the generation of resonances due to guidance of a mode in the thin-film. At certain conditions, the resonances overlap ...
A comparative study between SMS interferometers and lossy mode resonace optical fiber devices for sensing applications
(SPIE, 2015)
Contribución a congreso / Biltzarrerako ekarpena,
Optical fiber sensors are of great interest due to their intrinsic advantages over electronic sensors. In this work, the
sensing characteristics of two different and novel optical fiber devices are compared, after ...
Temperature sensor based on a hybrid ITOsilica resonant cavity
(Optical Society of America, 2015)
Artículo / Artikulua,
Integrated optical devices comprised of multiple material systems are able to achieve unique performance characteristics, enabling applications in sensing and in telecommunications. Due to ease of fabrication, the majority ...
Tapered single-mode optical fiber pH sensor based on lossy mode resonances generated by a polymeric thin-film
(IEEE, 2012)
Artículo / Artikulua,
Lossy mode resonances can be generated with certain polymeric nanostructures, such as those obtained with a multilayered assembly of poly(allylamine hydrochloride) and poly (acrylic acid). This coating is adsorbed by the ...
Fabrication of Bragg gratings on the end facet of standard optical fibers by sputtering the same material
(IEEE, 2016)
Artículo / Artikulua,
A sputtering process has been applied to deposit quarter-wavelength stacks on the end facet of cleaved optical fibers by using only one sputtering target. Standard multimode optical fibers were used as substrates to fabricate ...
Influence of waist length in lossy mode resonances generated with coated tapered single mode optical fibers
(IEEE, 2011)
Artículo / Artikulua,
In this work, the generation of electromagnetic resonances due to the deposition of a nanocoating on a tapered single-mode optical fiber is analyzed. The layer-by-layer technique is used to control the thickness of the ...
Label-free wavelength and phase detection based SMS fiber immunosensors optimized with cladding etching
(Elsevier, 2018)
Artículo / Artikulua,
The performance of E-SMS (Etched Singlemode-Multimode-Singlemode) optical fiber structures as immunosensors has been assessed by the implementation of antibody/antigen immunoassays. Through this procedure
it has been ...
Optimization of sensors based on multimode interference in single-mode–multimode– single-mode structure
(IEEE, 2013)
Artículo / Artikulua,
By coating a single-mode–multimode–single-mode
(SMS) structure with a complex refractive index thin-film the central
wavelength of the transmission and attenuation bands of the
optical spectrum can be shifted. By adequate ...
Sensors based on thin-film coated cladding removed multimode optical fiber and single-mode multimode single-mode fiber: a comparative study
(Hindawi Publishing Corporation, 2015)
Artículo / Artikulua,
Two simple optical fibre structures that do not require the inscription of a grating, a cladding removed multimode optical fibre
(CRMOF) and a single-mode multimode single-mode structure (SMS), are compared in terms of ...
Wavelength and phase detection based SMS fiber sensors optimized with etching and nanodeposition
(IEEE, 2016)
Artículo / Artikulua,
The development of an optical fiber refractometer by
hydrogen fluoride etching and sputtering deposition of a thin-film
of indium tin oxide on a single-mode-multimode-single-mode fiber
structure has been analyzed with ...