Buscar
Mostrando ítems 1-8 de 8
An antibacterial coating based on a polymer/sol-gel hybrid matrix loaded with silver nanoparticles
(Springer, 2011)
Artículo / Artikulua,
In this work a novel antibacterial surface composed of an organic-inorganic hybrid matrix of tetraorthosilicate and a polyelectrolyte is presented. A precursor solution of tetraethoxysilane (TEOS) and poly(acrylic acid ...
Generation of lossy mode resonances by deposition of high-refractive-index coatings on uncladded multimode optical fibers
(IOP Publishing Ltd, 2010)
Artículo / Artikulua,
A comparative study of lossy mode resonances generated by depositing two different materials
is presented. The two materials selected are indium tin oxide (ITO) and indium oxide. The two
materials present different ...
Optical fibre sensors using graphene-based materials: a review
(MDPI, 2017)
Artículo / Artikulua,
Graphene and its derivatives have become the most explored materials since Novoselov and Geim (Nobel Prize winners for Physics in 2010) achieved its isolation in 2004. The exceptional properties of graphene have attracted ...
Generation of lossy mode resonances with absorbing thin-films
(IEEE, 2010)
Artículo / Artikulua,
The generation of lossy mode resonances with
absorbing thin-films is analyzed with electromagnetic theory. The
main differences with surface plasmon resonances are presented
and some rules are given towards an optimum ...
Optimization in nanocoated D-shaped optical fiber sensors
(Optical Society of America, 2017)
Artículo / Artikulua,
Nanocoated D-shaped optical fibers have been proven as effective sensors. Here,
we show that the full width at half minimum (FWHM) of lossy mode resonance can be
reduced by optimizing the nanocoating width, thickness and ...
Lossy mode resonance generation with indium tin oxide coated optical fibers for sensing applications
(IEEE, 2010)
Artículo / Artikulua,
Surface plasmon resonances and lossy mode
resonances can be generated with Indium Tin Oxide (ITO)
coated optical fibers. Both phenomena are analyzed and
compared. Lossy mode resonances present important
advantages: ...
Generation of surface plasmon resonance and lossy mode resonance by thermal treatment of ITO thin-films
(Elsevier, 2014)
Artículo / Artikulua,
Silicon wafers coated with IndiumTinOxide (ITO) by application of sputtering technique have been
characterized after different post-annealing techniques, showing that this last factor is critical for the
quality of the ...
Design rules for lossy mode resonance based sensors
(Optical Society of America, 2012)
Artículo / Artikulua,
Lossy mode resonances can be obtained in the transmission spectrum of cladding removed
multimode optical fiber coated with a thin-film. The sensitivity of these devices to changes
in the properties of the coating or the ...