Buscar
Mostrando ítems 1-7 de 7
Experimental study and sensing applications of polarization-dependent lossy mode resonances generated by D-shape coated optical fibers
(IEEE, 2015)
Artículo / Artikulua,
The fabrication and characterization of an optical fiber refractometer based on Lossy Mode Resonances (LMR) is presented. TiO2/ poly (sodium 4-styrenesulfonate) (PSS) coatings deposited on side-polished D-shaped optical ...
Optical fiber refractometers based on sputtered indium tin oxide coatings
(IEEE, 2011)
Contribución a congreso / Biltzarrerako ekarpena,
This work presents the fabrication of optical fiber
refractometers based on indium tin oxide (ITO) coatings
deposited by sputtering with response in the visible spectral
region. ITO thin-films have been sputtered by ...
A comparative study between SMS interferometers and lossy mode resonace optical fiber devices for sensing applications
(SPIE, 2015)
Contribución a congreso / Biltzarrerako ekarpena,
Optical fiber sensors are of great interest due to their intrinsic advantages over electronic sensors. In this work, the
sensing characteristics of two different and novel optical fiber devices are compared, after ...
Giant sensitivity of optical fiber sensors by means of lossy moderesonance
(Elsevier, 2016)
Artículo / Artikulua,
Here we show an optical refractometer with a giant sensitivity of 304,360 nm per refractive index unit(nm/RIU). This sensitivity corresponds to a resolution of 3.28 × 10−9RIU if a standard optical spectrumanalyzer with a ...
SnO2 based optical fiber refractometers
(SPIE, 2012)
Contribución a congreso / Biltzarrerako ekarpena,
In this work, the fabrication and characterization of refractometers based on lossy mode resonances (LMR) is presented. Tin dioxide (SnO2) films deposited on optical fibers are used as the LMR supporting coatings. These ...
Sensitivity enhancement by diameter reduction in low cutoff wavelength single-mode multimode singlemode (SMS) fiber sensors
(IEEE, 2017)
Contribución a congreso / Biltzarrerako ekarpena,
Two different low cutoff wavelength single-mode fibers were used in single-mode multimode single-mode (SMS) configuration with the aim of designing sensors operating at short wavelengths, where optical sources and spectrometers ...
Optical fiber refractometers based on indium tin oxide coatings with response in the visible spectral region
(Elsevier, 2011)
Contribución a congreso / Biltzarrerako ekarpena,
This work presents the fabrication of optical fiber refractometers based on indium tin oxide (ITO) coatings with
response in the visible spectral region. ITO thin-films have been sputtered by employing a rotating mechanism ...