Listar Dpto. Ingeniería Mecánica, Energética y de Materiales - Mekanika, Energetika eta Materialen Ingeniaritza Saila por tema "Isothermal forging"
Mostrando ítems 1-5 de 5
-
Comparative study of the damage attained with different specimens by FEM
Fuertes Bonel, Juan Pablo
; Luri Irigoyen, Rodrigo ; Luis Pérez, Carmelo ; Salcedo Pérez, Daniel 
; León Iriarte, Javier ; Puertas Arbizu, Ignacio (Elsevier, 2015)
Contribución a congreso / Biltzarrerako ekarpena 
This present research work deals with the analysis of the design of different specimen geometries so that by finite volume simulations, the appearance of cracks may be predicted in the case of forging processes. To this ... -
Design and mechanical properties analysis of AA5083 ultrafine grained cams
Salcedo Pérez, Daniel ; Luis Pérez, Carmelo ; Luri Irigoyen, Rodrigo ; Puertas Arbizu, Ignacio ; León Iriarte, Javier ; Fuertes Bonel, Juan Pablo (MDPI, 2017)
Artículo / Artikulua
This present research work deals with the development of ultrafine grained cams obtained from previously ECAP (Equal Channel Angular Pressing)-processed material and manufactured by isothermal forging. The design and the ... -
Design and optimization of the dies for the isothermal forging of a cam
Salcedo Pérez, Daniel ; Luis Pérez, Carmelo ; Luri Irigoyen, Rodrigo ; León Iriarte, Javier ; Puertas Arbizu, Ignacio ; Fuertes Bonel, Juan Pablo (Elsevier, 2015)
Contribución a congreso / Biltzarrerako ekarpena
In the present study, the design of the dies required for the isothermal forging of a cam is analysed by finite volume method. Specifically, cams are of great importance in automotive industry, where a lower weight and ... -
Design, simulation and manufacturing of a connecting rod from ultra-fine grained material and isothermal forging
Fuertes Bonel, Juan Pablo; Luis Pérez, Carmelo ; Luri Irigoyen, Rodrigo ; Salcedo Pérez, Daniel ; León Iriarte, Javier ; Puertas Arbizu, Ignacio (Elsevier, 2016)
Artículo / Artikulua
In this research work, a study on the mechanical properties of isothermal forging for connecting rods is made from previously ECAP (Equal Channel Angular Pressing)-processed AA1050 and AA5083 aluminium alloys. This severe ... -
Mechanical properties analysis of an Al-Mg alloy connecting rod with submicrometric structure
León Iriarte, Javier ; Salcedo Pérez, Daniel ; Murillo Crespo, Óscar; Luis Pérez, Carmelo ; Fuertes Bonel, Juan Pablo ; Puertas Arbizu, Ignacio ; Luri Irigoyen, Rodrigo (MDPI, 2015)
Artículo / Artikulua
Over these last few years, there has been a growing interest in developing mechanical components from submicrometric materials due to the significant improvement that these materials present compared to their original ...
