Buscar
Mostrando ítems 1-10 de 19
Wavelength and phase detection based SMS fiber sensors optimized with etching and nanodeposition
(IEEE, 2016)
Artículo / Artikulua,
The development of an optical fiber refractometer by
hydrogen fluoride etching and sputtering deposition of a thin-film
of indium tin oxide on a single-mode-multimode-single-mode fiber
structure has been analyzed with ...
Mode transition in complex refractive index coated single-mode–multimode–single-mode structure
(Optical Society of America, 2013)
Artículo / Artikulua,
By coating a single-mode–multimode–single-mode (SMS)
structure with a high refractive index thin-film it is possible to obtain a
transition of modes for specific combinations of thin-film thickness, thinfilm
refractive ...
Refractometric sensors based on multimode interference in a thin-film coated singlemode– multimode–single-mode structure with reflection configuration
(Optical Society of America, 2014)
Artículo / Artikulua,
Thin-film coated single-mode–multimode–single-mode (SMS) structures have been analyzed both theoretically
and experimentally with the aim of detecting different refractive indices. By adequate selection
of the thickness ...
Label-free wavelength and phase detection based SMS fiber immunosensors optimized with cladding etching
(Elsevier, 2018)
Artículo / Artikulua,
The performance of E-SMS (Etched Singlemode-Multimode-Singlemode) optical fiber structures as immunosensors has been assessed by the implementation of antibody/antigen immunoassays. Through this procedure
it has been ...
Optimization of sensors based on multimode interference in single-mode–multimode– single-mode structure
(IEEE, 2013)
Artículo / Artikulua,
By coating a single-mode–multimode–single-mode
(SMS) structure with a complex refractive index thin-film the central
wavelength of the transmission and attenuation bands of the
optical spectrum can be shifted. By adequate ...
Sensors based on thin-film coated cladding removed multimode optical fiber and single-mode multimode single-mode fiber: a comparative study
(Hindawi Publishing Corporation, 2015)
Artículo / Artikulua,
Two simple optical fibre structures that do not require the inscription of a grating, a cladding removed multimode optical fibre
(CRMOF) and a single-mode multimode single-mode structure (SMS), are compared in terms of ...
Etched LPFGs in reflective configuration for sensitivity and attenuation band depth increase
(IEEE, 2016)
Artículo / Artikulua,
A reflection configuration setup for long-period
fiber gratings is presented. It permits to obtain a unique band
with attenuation double than that obtained in transmission
configuration, which is interesting for ...
Sensitivity optimization with cladding-etched long period fiber gratings at the dispersion turning point
(Optical Society of America, 2016)
Artículo / Artikulua,
This work presents a refractive index sensor based on a long period fiber grating
(LPFG) made in a reduced cladding fiber whose low order cladding modes have the turning
point at large wavelengths. The combination of ...
Optimized strain long-period fiber grating (LPFG) sensors operating at the dispersion turning point
(IEEE, 2018)
Artículo / Artikulua,
Two phenomena for enhancing the sensitivity of longperiod
fiber gratings are combined toward an increase of the sensitivity
to strain of this type of devices: the dispersion turning point
(DTP) and the cladding diameter ...
Increasing the sensitivity of an optic level sensor with a wavelength and phase sensitive single-mode multimode single-mode (SMS) fiber structure
(IEEE, 2017)
Artículo / Artikulua,
The sensitivity of a liquid level sensor based on
a single-mode-multimode-single-mode fiber structure has been
increased by hydrofluoric acid etching. The etching process was
analyzed and monitored both theoretical and ...