Buscar
Mostrando ítems 1-8 de 8
Experimental study and sensing applications of polarization-dependent lossy mode resonances generated by D-shape coated optical fibers
(IEEE, 2015)
Artículo / Artikulua,
The fabrication and characterization of an optical fiber refractometer based on Lossy Mode Resonances (LMR) is presented. TiO2/ poly (sodium 4-styrenesulfonate) (PSS) coatings deposited on side-polished D-shaped optical ...
Asymmetrically and symmetrically coated tapered optical fiber for sensing applications
(SPIE, 2015)
Contribución a congreso / Biltzarrerako ekarpena,
The deposition of a non-metallic thin-film in a symmetrically coated tapered optical fiber leads to the generation of resonances due to guidance of a mode in the thin-film. At certain conditions, the resonances overlap ...
A comparative study between SMS interferometers and lossy mode resonace optical fiber devices for sensing applications
(SPIE, 2015)
Contribución a congreso / Biltzarrerako ekarpena,
Optical fiber sensors are of great interest due to their intrinsic advantages over electronic sensors. In this work, the
sensing characteristics of two different and novel optical fiber devices are compared, after ...
Sensors based on thin-film coated cladding removed multimode optical fiber and single-mode multimode single-mode fiber: a comparative study
(Hindawi Publishing Corporation, 2015)
Artículo / Artikulua,
Two simple optical fibre structures that do not require the inscription of a grating, a cladding removed multimode optical fibre
(CRMOF) and a single-mode multimode single-mode structure (SMS), are compared in terms of ...
Single-mode-multimode-single-mode and lossy mode resonance-based devices: a comparative study for sensing applications
(Springer-Verlag, 2015)
Artículo / Artikulua,
High sensitive refractometers based on lossy mode resonances (LMRs) supported by ITO coated D-shaped optical fibers
(Optical Society of America, 2015)
info:eu-repo/semantics/article,
Tin doped indium oxide (ITO) coatings fabricated onto D-shaped
optical fibers are presented as the supporting medium for Lossy Mode
Resonances (LMRs) generation. The characteristic geometry of ITO-coated
D-shaped optical ...
Methodology to assess the impact of the introduction of new technologies in smart cities
(Federación de Asociaciones de Ingenieros Industriales de España, 2015)
info:eu-repo/semantics/article,
Estamos frente a una revolución producto de los sistemas digitales y de comunicación, donde el papel de la tecnología continuará creciendo exponencialmente. Está calando profundamente en la sociedad, y tiene
un alto impacto ...
A comparative study in the sensitivity of optical fiber refractometers based on the incorporation of gold nanoparticles into layer-by-layer films
(Exeley, 2015)
info:eu-repo/semantics/article,
In this work, optical fiber refractometers based on the successive incorporation of gold nanoparticles have been fabricated by means of the Layer-by-Layer Embedding (LbL-E) deposition technique. This enables the apparition ...