Listar Comunicaciones y ponencias de congresos - Biltzarrak eta Argitalpenak por autor UPNA "Iriarte Galarregui, Juan Carlos"

Mostrando ítems 1-6 de 6

    • Design alternatives for a submm-wave Fabry-Perot cavity antenna 

      Platero Rodrigo, Naiara; Iriarte Galarregui, Juan Carlos Upna Orcid; Ederra Urzainqui, Íñigo Upna Orcid (IEEE, 2022)   Contribución a congreso / Biltzarrerako ekarpena  OpenAccess
      This paper discusses different design alternatives for a high gain planar antenna at 240 GHz. The antenna is based on a Fabry-Perot configuration, where two different partial reflection surfaces (PRS) are considered: a ...

    • EBG superstrate antenna for WAAS bands 

      Osés de León, Ángel Upna; Iriarte Galarregui, Juan Carlos Upna Orcid; Ederra Urzainqui, Íñigo Upna Orcid; Gonzalo García, Ramón Upna Orcid (2008)   Contribución a congreso / Biltzarrerako ekarpena  OpenAccess
      Multiband antennas can simplify considerably the complexity of receivers and transmitters, reducing the size and the mass of the conventional configurations. On the other hand, applications with high directivity requirements ...

    • Hexagonal CORPS-BFN to feed OLAF SAR instrument 

      Biurrun Quel, Carlos Upna Orcid; Iriarte Galarregui, Juan Carlos Upna Orcid; Ederra Urzainqui, Íñigo Upna Orcid; Río Bocio, Carlos del Upna Orcid (IEEE, 2021)   Contribución a congreso / Biltzarrerako ekarpena  OpenAccess
      The concept of Coherently Radiating Periodic Structures-based Beam Forming Networks is applied to feed OLAF (OverLapped SubArray Fed) antenna for SAR Instrument at L-Band. The proper feeding of this system requires the ...

    • A new ABS conductive material to develop fully 3D-printed patch antennas 

      Jiménez Peña, Javier; Irigoyen, Joseba; Aresti Bartolomé, Maite; Ederra Urzainqui, Íñigo Upna Orcid; Bravo Larrea, Javier Upna Orcid; Iriarte Galarregui, Juan Carlos Upna Orcid (IEEE, 2023)   Contribución a congreso / Biltzarrerako ekarpena  OpenAccess
      Additive manufacturing technology is rapidly overcoming some of its initial limitations and, thus, creating a very useful engineering option for prototyping complex geometries for a wide range of electronic devices. Based ...

    • New hexagonal CORPS-BFN for multibeam antenna applications 

      Biurrun Quel, Carlos Upna Orcid; Montesano, Antonio; Ederra Urzainqui, Íñigo Upna Orcid; Iriarte Galarregui, Juan Carlos Upna Orcid; Río Bocio, Carlos del Upna Orcid (IEEE, 2020)   Contribución a congreso / Biltzarrerako ekarpena  OpenAccess
      This work presents a new topology of a Coherently Radiating Periodic Structure - Beam Forming Network (CORPS-BFN) and its application for multibeam systems. A unit cell, consisting of a transition from a coaxial input to ...

    • Research on metamaterials for antenna applications 

      Gonzalo García, Ramón Upna Orcid; Ederra Urzainqui, Íñigo Upna Orcid; Iriarte Galarregui, Juan Carlos Upna Orcid; Martínez Pascual, Beatriz Upna; Sáenz Sáinz, Elena Upna; Cantora Álvarez, Pablo; Maagt, Peter de (2005)   Contribución a congreso / Biltzarrerako ekarpena  OpenAccess
      During the last 20 years a lot of attention has been paid to apply Electromagnetic Band Gap (EBG) technology in different frequency ranges, from microwaves to optics. EBG technology is based on the use of periodic structures ...
      El Repositorio ha recibido la ayuda de la Fundación Española para la Ciencia y la Tecnología para la realización de actividades en el ámbito del fomento de la investigación científica de excelencia, en la Línea 2. Repositorios institucionales (convocatoria 2020-2021).
      Logo MinisterioLogo Fecyt

      Contacto | Sugerencias