Listar Artículos de revista INAMAT2 - INAMAT2 aldizkari artikuluak por título
Mostrando ítems 202-221 de 402
-
M(II)-Al-Fe layered double hydroxides synthesized from aluminum saline slag wastes and catalytic performance on cyclooctene oxidation
Aluminum was extracted from saline slags via an alkaline method and employed in the synthesis of Layered Double Hydroxides (LDH) with various M2+ cations (Co, Mg, Ni and Zn), while Al and Fe were the M3+ cations, using the ... -
Magnetic behavior in commercial iron-silicon alloys controlled by the dislocation dynamics at temperatures below 420 K
A decrease of the temperature dependent coercive forces up to around 370 K is discovered in iron silicon alloys, both in quenched samples and in samples which were previously thermally treated to achieve the highest magnetic ... -
Magnetic binary encoding system based on 3D printing and GMI detection prototype
In this work, the feasibility of a magnetic binary encoding system using 3D printing technology is analyzed. The study has a double interest, that is, the possibility of printing a 3D piece that contains the codified ... -
Magnetic carbon Fe3O4 nanocomposites synthesized via magnetic induction heating
Magnetic Induction Heating (MIH) of magnetite nanoparticles is employed as a novel synthesis procedure of carbon based magnetic nanocomposites. Magnetic nanoparticles (Fe3O4) and fructose (1:2 weight ratio) were mechanically ... -
Magnetic domain configurations of pulsed laser deposited MnBi hard magnetic films
Hard magnetic MnBi films were obtained by appropriate heat treatments of pulsed laser deposited (PLD) (Bi/Mn) films. X-ray diffraction patterns indicated a slight texture of MnBi crystallites and magnetometry measurements ... -
Magnetic Fe/Fe3C@C nanoadsorbents for efficient Cr (VI) removal
Magnetic carbon nanocomposites (α-Fe/Fe3C@C) synthesized employing fructose and Fe3O4 magnetite nanoparticles as the carbon and iron precursors, respectively, are analyzed and applied for the removal of Cr (VI). Initial ... -
Magnetically activated 3D printable polylactic acid/polycaprolactone/magnetite composites for magnetic induction heating generation
Additive manufacturing technology has attracted the attention of industrial and technological sectors due to the versatility of the design and the easy manufacture of structural and functional elements based on composite ... -
Magnetically recyclable TiO2/MXene/MnFe2O4 photocatalyst for enhanced peroxymonosulphate-assisted photocatalytic degradation of carbamazepine and ibuprofen under simulated solar light
In this study, a novel TiO2/Ti3C2/MnFe2O4 magnetic photocatalyst with dual properties, enabling (i) improved photocatalytic degradation with PMS activation under simulated solar light and (ii) magnetic separation after the ... -
Magnetically tunable damping in composites for 4D printing
Composite materials are being used in the design of new devices to produce more functional, cheap and on-demand products. In particular, 3D printing technology based on composites opens a huge field enabling the freedom ... -
Magnetocaloric effect enhancement driven by intrinsic defects in a Ni45Co5Mn35Sn15 alloy
The influence of mechanically-induced defects on the magnetostructural properties is analyzed in a Ni-Co-Mn-Sn alloy subjected to soft milling and subsequent annealing treatments. It is found that, opposite to what occurs ... -
Martensitic transformation controlled by electromagnetic field: from experimental evidence to wireless actuator applications
Mechanical actuators based on shape memory alloys (SMA) are becoming a key component in the development of novel soft robotic applications and surgically implantable devices. Their working principle relies in the temperature ... -
A mathematical approach to law and deal modelling: legislation and agreements
Social norms are a set of rules to be followed by the people of a community in order to have a better coexistence, to which the behaviors, tasks, and activities of the human being must be adjusted. The set or system of ... -
Mechanical performance of AlCrSiN and AlTiSiN coatings on inconel and steel substrates after thermal treatments
The objective of this study was to explore the mechanical properties of AlCrSiN and AlTiSiN coatings deposited on Inconel and steel substrates after thermal treatments of 500 °C and 800 °C. Nanoindentation was used to ... -
Metal-Al layered double hydroxides synthesized from aluminum slags as efficient CO2 adsorbents at pre- and post-combustion temperature
Layered double hydroxides (LDH) have been proposed as the materials that offer the best performance in the moderate-temperature range, between 200 and 450 °C, for CO2 adsorption, so the effect of some synthesis parameters ... -
Micrometric non-contact position magnetoimpedance sensor
In this work a sensitive micrometric non-contact position sensor based on the Giant MagnetoImpedance effect (GMI) is analyzed. A nearly zero magnetostrictive CoFeSiBCr wire was employed as sensor nucleus. The sensing ... -
Mid-infrared spectroscopy (MIR) for simultaneous determination of fat and protein content in meat of several animal species
The aim of this research was to study the application of MIR spectroscopy as an alternative to conventional methods to determine fat and protein content. Samples of the main species used to produce meat products were ... -
ModulaTransprot: explorando el uso de la nutrición amoniacal para reducir contenidos de nitrato en hortalizas de hoja en sistemas de cultivo sin suelo
Encontrar alternativas a través del diseño de productos y sistemas sostenibles que aumenten la eficiencia en el uso del nitrógeno y disminuya los contenidos de nitratos en tejidos comestibles es una necesidad científica, ... -
Monitoring oocyte-based human pluripotency acquisition using synchrotron-based FTIR microspectroscopy reveals specific biomolecular trajectories
The reprogramming of human somatic cells to induced pluripotent cells (iPSCs) has become a milestone and a paradigm shift in the field of regenerative medicine and human disease modeling including drug testing and genome ... -
Monitoring structural transformations in metamagnetic shape memory alloys by non-contact GMI technology
(IOP Publishing, 2023) Artículo / ArtikuluaDifferent applications based on metamagnetic shape memory alloy (MSMA) require monitoring the evolution of the martensitic transformation (MT) to optimize the actuation mechanism. To avoid interaction with the active ... -
Monokristal-monokristal eraldaketak polioxometalatoetan oinarritutako sistemetan: termikoki aktibatutako zenbait adibide
Kanpo-estimuluen bitartez aktibatutako fase-trantsizioak, eta haien artean kristal bakun izaera mantentzen duten kasuak, hots monokristal-monokristal (MKMK) eraldaketak, interes handikoak dira; izan ere, gai dira i) ezaugarri ...