Listar Artículos de revista ISC - ISC aldizkari artikuluak por autor UPNA "López-Amo Sáinz, Manuel"
Mostrando ítems 1-20 de 29
-
All-PM fiber loop mirror interferometer analysis and simultaneous measurement of temperature and mechanical vibration
In this work, a new all-polarization maintaining (PM) fiber loop mirror interferometer is proposed and validated as temperature and mechanical vibration sensor. The scheme employs the arms of a PM coupler as communication ... -
Anomalous relative intensity noise transfer in ultralong random fiber lasers
We present, for the first time, an experimental demonstration of RIN noise transfer dampening at low frequencies in random distributed feedback ultralong Raman fibre lasers based on conventional telecommunication fibres. ... -
C and L band fiber lasers enhanced by ultrafast laser inscribed artificial backscatter reflectors
This letter presents an experimental comparison between two linear-cavity erbiumdoped fiber lasers (EDFL) assisted by two different artificial backscatter fiber-based reflectors. Both reflectors were inscribed by femtosecond ... -
Comparison between capacitive and microstructured optical fiber soil moisture sensors
Soil moisture content has always been an important parameter to control because it is a deterministic factor for site-specific irrigation, seeding, transplanting, and compaction detection. In this work, a discrete sensor ... -
Comparison between different structures of suspended-core microstructured optical fibers for volatiles sensing
In this paper, different core structures of microstructured optical fibers (MOFs) for low-finesse Fabry-Perot (FP) sensors are experimentally compared to get the highest sensitivity. These devices are designed for volatile ... -
Design of optical fiber Bragg grating-based sensors for flow measurement in pipes
In this work, optical Fiber Bragg grating (FBG) sensors were used to measure water flow in pipes. Several types of coatings were incorporated into the design of the sensors to examine their effects on the elastic strain ... -
Effect of linewidth on the relative intensity noise in random distributed feedback raman fiber lasers
We experimentally explore the relation between spectral linewidth and RIN transfer in half-open cavity random distributed feedback Raman lasers, demonstrating for the first time the possibility of adjusting the pump-to-signal ... -
Gamma radiation-induced effects over an optical fiber laser: towards new sensing applications
In the present work, the effect of gamma radiation on the performance of different types of erbium-doped fibers (EDFs) when they are used in a fiber ring cavity (FRC) configuration is studied. Several pieces of commercial ... -
High performance fiber laser resonator for dual band (C and L) sensing
This work presents an experimental analysis and comparison of the performance of quasi-randomly distributed reflectors inscribed into a single-mode fiber as a sensing mirror both in C- and L-band. Single-wavelength emission ... -
Hybrid Raman‑erbium random fiber laser with a half open cavity assisted by artificially controlled backscattering fiber refectors
A hybrid Raman-erbium random fber laser with a half-open cavity assisted by chirped artifcially controlled backscattering fber refectors is presented. A combination of a 2.4 km-long dispersion compensating fber with two ... -
Liquid level sensor based on dynamic Fabry–Perot interferometers in processed capillary fiber
In this work, a novel optical fiber sensor capable of measuring both the liquid level and its refractive index is designed, manufactured and demonstrated through simulations and experimentally. For this, a silica capillary ... -
Multiparameter sensor based on a multiinterferometric serial configuration for temperature and strain measurements
In this work, a multi-parameter point sensor based on the combination of Fabry-Perot (FP) and the anti-resonant (AR) reflecting guidance in cascade configuration is proposed and experimentally demonstrated. This structure, ... -
Optical fiber lasers assisted by microdrilled optical fiber tapers
In this Letter, we present an analysis of the backscattering generated in a microdrilled tapered fiber within a short-linear-cavity fiber laser. We propose and experimentally demonstrate a fiber cavity laser based on a ... -
Quasi-distributed vibration sensing based on weak reflectors and STFT demodulation
In this work, a new system is proposed for quasi-distributed vibration sensing based on the Doppler effect. The setup employs an optical frequency domain reflectometer (OFDR) and an array of weak reflectors. The short-time ... -
Quasi-distributed vibration sensing using OFDR and weak reflectors
The authors proposed a quasi-distributed vibration sensing technique using in-line weak reflectors and optical frequency domain reflectometry (OFDR). As a result, they achieved an 8 kHz measurable vibration frequency with ... -
Real time measuring system of multiple chemical parameters using microstructured optical fibers based sensors
In this paper, a multiplexing system for simultaneous interrogation of optical fiber sensors which measure different parameters is presented and validated. The whole system has been tested with 6 different sensing heads ... -
Sensitivity optimization of a microstructured optical fiber ammonia gas sensor by means of tuning the thickness of a metal oxide nano-coating
In this paper, the influence of the thickness of metallic-oxide coatings, ITO, and SnO2 on the sensitivity of a microstructured optical fiber Fabry–Pérot (FP) has been studied with the aim of developing ammonia gas fiber ... -
Simultaneous strain and temperature multipoint sensor based on microstructured optical fiber
In this paper, a new sensor system for simultaneous and independent multipoint strain and temperature measurements is presented. The interrogation of the sensing heads has been carried out by monitoring their FFT phase ... -
Single longitudinal mode lasers by using artificially controlled backscattering erbium doped fibers
In this work, we propose and experimentally demonstrate a new distributed short linear cavity fiber laser. At one of the cavity ends, fabricated by a commercial femtosecond fiber laser chirped pulse amplfier, an artificially ... -
SnO2-MOF-Fabry-Perot optical sensor for relative humidity measurements
In this paper, a new optical fiber sensor for relative humidity measurements is presented and characterized. The sensor is based on a SnO2 sputtering deposition on a microstructured optical fiber (MOF) low-finesse Fabry-Pérot ...