Current control design and implementation for a 2.4 kW Boost converter for fuel cells

View/ Open
Date
2017Author
Advisor
Version
Acceso abierto / Sarbide irekia
Type
Trabajo Fin de Grado/Gradu Amaierako Lana
Impact
|
nodoi-noplumx
|
Abstract
El presente proyecto se basa en el diseño e implementación del control de corriente
para un convertidor DC/DC elevador para pilas de combustible. Como punto de partida se toman
los anteriores proyectos de T. Esparza [1] y de M. Lumbier [2] basados en el montaje y el diseño
del convertidor el cual se quiere controlar.
Para lograr el correcto funcionamiento del control se siguen los siguientes ...
[++]
El presente proyecto se basa en el diseño e implementación del control de corriente
para un convertidor DC/DC elevador para pilas de combustible. Como punto de partida se toman
los anteriores proyectos de T. Esparza [1] y de M. Lumbier [2] basados en el montaje y el diseño
del convertidor el cual se quiere controlar.
Para lograr el correcto funcionamiento del control se siguen los siguientes pasos:
- Estudio del sistema y su necesidad de control
- Estudio de diferentes controles y sus características
- Simulación y parámetros del control escogido
- Implementación analógica del control
- Diseño e implementación de la medida de diferentes variables de corriente y tensión
- Ensayos del sistema completo y su respuesta ante diferentes referencias [--]
The current project is based on the design and the implementation of the current control
for a boost converter for Fuel Cells. T. Esparza [1] and M. Lumbier [2] projects were taken as
starting point as they are based on the assembly and the design of the boost converter wanted
to control.
In order to ensure the proper operation of the control, the following steps are taken:
- To study the sy ...
[++]
The current project is based on the design and the implementation of the current control
for a boost converter for Fuel Cells. T. Esparza [1] and M. Lumbier [2] projects were taken as
starting point as they are based on the assembly and the design of the boost converter wanted
to control.
In order to ensure the proper operation of the control, the following steps are taken:
- To study the system and its needs of control
- To study different controls and their characteristics
- To simulate and obtain the parameters of the chosen control
- To implement analogically the selected control
- To design and implement the measurement of different variables of current and
voltage
- To test the whole system and its response to different references [--]
Subject
Convertidor elevador,
Control de corriente,
Diseño,
Implementación,
Pilas de combustible,
Boost converter,
Current control,
Design,
Implementation,
Fuel cells
Degree
Graduado o Graduada en Ingeniería en Tecnologías Industriales por la Universidad Pública de Navarra /
Industria Teknologietako Ingeniaritzan Graduatua Nafarroako Unibertsitate Publikoan