Show simple item record

dc.creatorLeón Iriarte, Javieres_ES
dc.creatorSalcedo Pérez, Danieles_ES
dc.creatorMurillo Crespo, Óscares_ES
dc.creatorLuis Pérez, Carmeloes_ES
dc.creatorFuertes Bonel, Juan Pabloes_ES
dc.creatorPuertas Arbizu, Ignacioes_ES
dc.creatorLuri Irigoyen, Rodrigoes_ES
dc.date.accessioned2017-10-30T11:14:38Z
dc.date.available2017-10-30T11:14:38Z
dc.date.issued2015
dc.identifier.issn2075-4701 (Electronic)
dc.identifier.urihttps://hdl.handle.net/2454/26071
dc.description.abstractOver these last few years, there has been a growing interest in developing mechanical components from submicrometric materials due to the significant improvement that these materials present compared to their original state. This present research work deals with the study of the mechanical properties of a connecting rod isothermally forged from different starting materials. These materials are as follows: annealed aluminum alloy (AA) 5754, the same alloy previously deformed through equal channel angular pressing (ECAP) and a third case where the previously ECAP-processed material is subjected to a recovery heat treatment. A comparison is made between finite volume (FV) simulations and experimental tests with respect to hardness, plastic strain and forging force. Furthermore, the improvement in the mechanical properties of the connecting rod forged from predeformed material is evaluated in comparison to the connecting rod forged with annealed material. The microstructure of both cases is also compared at the end of the manufacturing process.en
dc.description.sponsorshipThe authors acknowledge the support given by the Ministerio de Ciencia e Innovación (Spain) (Research Project: DPI2013-41954-P.en
dc.format.extent17 p.
dc.format.mimetypeapplication/pdfen
dc.language.isoenen
dc.publisherMDPIen
dc.relation.ispartofMetals 2015, 5(3), 1397-1413en
dc.rights© 2015 by the authors; licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution license.en
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/
dc.subjectECAPen
dc.subjectIsothermal forgingen
dc.subjectMicrohardnessen
dc.subjectFVen
dc.subjectHeat treatmenten
dc.titleMechanical properties analysis of an Al-Mg alloy connecting rod with submicrometric structureen
dc.typeArtículo / Artikuluaes
dc.typeinfo:eu-repo/semantics/articleen
dc.contributor.departmentUniversidad Pública de Navarra. Departamento de Ingeniería Mecánica, Energética y de Materialeses_ES
dc.contributor.departmentNafarroako Unibertsitate Publikoa. Mekanika, Energetika eta Materialen Ingeniaritza Sailaeu
dc.rights.accessRightsAcceso abierto / Sarbide irekiaes
dc.rights.accessRightsinfo:eu-repo/semantics/openAccessen
dc.identifier.doi10.3390/met5031397
dc.relation.projectIDinfo:eu-repo/grantAgreement/ES/1PE/DPI2013-41954en
dc.relation.publisherversionhttps://dx.doi.org/10.3390/met5031397
dc.type.versionVersión publicada / Argitaratu den bertsioaes
dc.type.versioninfo:eu-repo/semantics/publishedVersionen


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

© 2015 by the authors; licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution license.
Except where otherwise noted, this item's license is described as © 2015 by the authors; licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution license.