Dpto. Ingeniería Eléctrica, Electrónica y de Comunicación - Ingeniaritza Elektriko et Elektronikoa eta Komunikazio Ingeniaritza Saila [desde mayo 2018 / 2018ko maiatzetik]
Véase además departamentos anteriores a mayo 2018 / Ikus, halaber, 2018ko maiatza baino lehenagoko sailak
Dpto. Automática y Computación - Automatika eta Konputazioa Saila
Dpto. Ingeniería Eléctrica y Electrónica - Ingeniaritza Elektriko eta Elektronikoa Saila
Collections in this community
Recent Submissions
-
Lossy mode resonances biosensor for the detection of C-reactive protein
The fabrication and characterization of optical fiber biosensor based on Lossy Mode Resonances (LMR) to detect C-reactive protein (CRP) are presented. Indium tin oxide (ITO) coatings deposited on side-polished D-shaped ... -
Optical fiber sensors for asphalt structures monitoring
A novel optical fiber installation method was explored for asphalt monitoring. Glassfiber polymer encapsulated SMF was installed in the intermediate and surface layers in order to study the strain sensitivity with a ... -
A new ABS conductive material to develop fully 3D-printed patch antennas
Additive manufacturing technology is rapidly overcoming some of its initial limitations and, thus, creating a very useful engineering option for prototyping complex geometries for a wide range of electronic devices. Based ... -
Building global competencies: a strategic approach to internationalization of engineering education
(Eindhoven University of Technology and Fontys University of Applied Sciences, 2023) Contribución a congreso / Biltzarrerako ekarpenaInternational mobility is an essential aspect of undergraduate education that enables students to acquire the necessary competences required by the European Higher Education Area (EHEA). However, small universities such ... -
Dimensionado y gestión energética de sistemas fotovoltaicos con almacenamiento para autoconsumo residencial
El incremento del precio de la electricidad, el abaratamiento de la energía solar fotovoltaica y de los sistemas de almacenamiento, unido a las políticas de fomento de la energía limpia, han hecho especialmente atractivo ... -
Integrated platform for microfluidics based cell culture applications
The ongoing developments in the field of microfluidics-based cell culture have led to a significant interest in systems for their visualization and control. The existing cell culture systems are limiting due to cost, ... -
A novel ku-band circularly-polarized horn antenna based on a ridged wall
In this paper, a novel wideband (31.5 % bandwidth) circularly-polarized antenna based on a ridged wall is presented. A pair of ridges on the inner wall of the horn serves as an inbuilt polarizer, which can generate left-hand ... -
One-year analysis of road condition using FBG arrays
In this work, it is presented an analysis of FBG arrays installed in a public road. The arrays were installed in a newly paved urban road and were monitored for more than one year. The study evidences the permanent deformation ... -
Women, Science and Technology Chair—Promoting women’s careers in stem fields
The Chair of Women, Science and Technology of the Universidad Pública de Navarra (UPNA) aims to increase the participation of women in the fields of science and technology. Scientific culture and dissemination are the main ... -
Multicore fiber sensors for strain measurement towards traffic monitoring
In this work, two new interferometric sensors based on multicore optical fibers for the measurement of strain with the ultimate goal of traffic monitoring are presented. The operating principle of each sensor relied on ... -
Erbium-doped fiber ring cavity for the measurement of refractive index variations
In this work, an erbium-doped fiber ring cavity based on a 3dB optical coupler for refractive index measurements is presented and experimentally verified. This interrogation system, based on a 1 x 2 optical coupler, uses ... -
Fiber optic mirror fabrication using general-purpose metallic pigments
In this work, the potential of using general-purpose paints to fabricate highly reflective, low-cost optical mirrors is evaluated. The study shows that high-reflectivity mirrors can be created in standard single-mode fiber ... -
Direct functionalization of TiO2/PSS sensing layer for an LMR-based optical fiber reusable biosensor
Functionalization plays a crucial role in the development of biosensors. In this study, bioreceptors were directly immobilized onto the surface of a sensing layer after physical activation, avoiding the need for longer and ... -
Measurement of paracetamol concentration using a fiber laser system
A linear fiber laser system for measurements of paracetamol concentration is experimentally demonstrated. The cavity is based on a fiber loop mirror and an FBG centered at 1567.8 nm. The sensing head corresponds to a ... -
Defining and scoping participatory health informatics - an eDelphi study
Background Health care has evolved to support the involvement of individuals in decision making by, for example, using mobile apps and wearables that may help empower people to actively participate in their treatment and ... -
Design of optical fiber Bragg grating-based sensors for flow measurement in pipes
In this work, optical Fiber Bragg grating (FBG) sensors were used to measure water flow in pipes. Several types of coatings were incorporated into the design of the sensors to examine their effects on the elastic strain ... -
Innovative approaches for organizing an inclusive optics and photonics conference in virtual format
The COVID pandemic is forcing the renewal of scientific conferences, offering opportunities to introduce technological and inclusive developments. Our analysis focuses on the implementation of inclusive practices for female ... -
Diffuse-scattering-informed geometric channel modeling for THz wireless communications systems
Surpassing 100 Gbps data throughput is a key objective and an active area of research for sixth-generation (6G) wireless networks that can only be met by exploiting the TeraHertz (THz) frequency band (0.3 - 10 THz). THz ... -
Validation of the filling factor index to study the filling process of the sEMG signal in the quadriceps
Introduction: The EMG filling factor is an index to quantify the degree to which an EMG signal has been filled. Here, we tested the validity of such index to analyse the EMG filling process as contraction force was ... -
Bulk-driven CMOS linear transconductance-cell for AC amplifiers with very low cut-off frequency
(Elsevier, 2023) Artículo / ArtikuluaThis manuscript proposes a novel linearized transconductor for AC amplifiers with a very low cut-off frequency. The cell uses an alternative solution that is based on a modified source-degeneration OTA, using two bulkdriven ...